Neutron irradiation effects on magnetic minor hysteresis loops in nuclear reactor pressure vessel steels

Magnetic minor hysteresis loops have been measured on A533B-type nuclear reactor pressure vessel steels with various combinations of Cu and Ni contents after neutron irradiation to a fluence up to 3.32 × 10¹⁹ n cm^?2. A strong compositional dependence of minor-loop properties, which are indicators of internal stress, was found. The properties of high-Cu and high-Ni steel show a large increase in the low fluence regime below 0.4 × 10¹⁹ n cm^?2, followed by a slow decrease, while those for low-Cu or low-Ni steel show a sudden decrease. The changes are roughly in linear proportion to the yield strength changes. The results were explained from the viewpoint of the formation and growth of Cu-rich precipitates and/or fine scale defects in the matrix and along pre-existing dislocations.     

Superconductivity and magnetic fluctuations in Cd(2))Re(2)O(7) via Cd nuclear magnetic resonance and re nuclear quadrupole resonance

We report Cd nuclear magnetic resonance (NMR) and Re nuclear quadrupole resonance (NQR) studies on Cd(2)Re(2)O(7), the first superconductor among pyrochlore oxides (T(c) approximately 1 K). The Re NQR spectrum at zero magnetic field below 100 K rules out any magnetic or charge order. The spin-lattice relaxation rate below T(c) exhibits a pronounced coherence peak and follows the weak-coupling BCS theory with nearly isotropic energy gap. The results of Cd NMR point to a moderate ferromagnetic enhancement at high temperatures followed by a rapid decrease of the density of states below the structural transition temperature of 200 K.     

Decomposition mechanism of triethylindium (TEI) on a GaP(0 0 1)-(2×1) surface studied by LEED, AES, TPD and HREELS

Adsorption and decomposition of triethylindium (TEI: (C₂H₅)₃In) on a GaP(0 0 1)-(2×1) surface have been studied by low-energy electron diffraction (LEED), Auger electron spectroscopy (AES), temperature-programmed desorption (TPD) and high-resolution electron energy loss spectroscopy (HREELS). It is found from the TPD result that ethyl radical and ethylene are evolved at about 300–400 and 450–550 K, respectively, as decomposition products of TEI on the surface. This result is quite different from that on the GaP(0 0 1)-(2×4) surface. The activation energy of desorption of ethyl radical is estimated to be about 93 kJ/mol. It is suggested that TEI is adsorbed molecularly on the surface at 100 K and that some of TEI molecules are dissociated into C₂H₅ to form P–C₂H₅ bonds at 300 K. The vibration modes related to ethyl group are decreased in intensity at about 300–400 and 450–550 K, which is consistent with the TPD result. The TEI molecules (including mono- and di-ethylindium) are not evolved from the surface. Based on the TPD and HREELS results, the decomposition mechanism of TEI on the GaP(0 0 1)-(2×1) surface is discussed and compared with that on the (2×4) surface.     

Analysis of Spectral Reflectance Using Normalization Method from Endoscopic Spectroscopy System

Objective assessment of gastrointestinal mucosal color is extremely important in the endoscopic diagnosis of digestive tract disease. In this paper, we propose a method to clarify the spectral characteristics of gastric and colon cancer. A large number of spectral reflectance data of mucous membrane are measured by the endoscopic spectroscopy system (ESS) in the National Cancer Center Hospital East, Kashiwa, Japan and the Department of Internal Medicine, Self-Defense Force Center Hospital, Tokyo, Japan. We assume that early cancer appears primarily in the spectral data of short wavelength, because it is usually present in a superficial cell where short wavelength light is scattered more strongly than long wavelength light. To identify the features in the short wavelength components, the spectral reflectance was divided by the reflectance of a long wavelength. We investigated the possibility of distinguishing early cancer from normal spectral data through statistical analysis, employing the projection axis as the mean difference between them. Early cancer and normal spectral data were projected on the projection axis, and the Student’s T-test was applied to evaluate the mean of the distribution between these data.     

Analysis of dynamic behavior of human middle ear using a finite-element method.

Applying the general-purpose finite-element package program (ISAP), a three-dimensional finite-element method (FEM) model of a human right middle ear, which included ossicles, was made and the mechanical properties and boundary conditions of the middle ear were determined by a comparison between the numerical results obtained from the FEM analysis and the measurement results of the fresh cadavers, normal subjects and patients, which were obtained by our developed sweep frequency middle ear analyzer (MEA). The "Elastic" boundary condition consisting of linear and torsional springs at the eardrum attachments to the annular ligament was more appropriate for the actual condition than "fully clamped" one. Rotational axis of the ossicular chain was assumed to be a fixed straight line from the anterior process of the malleus to the short process of the incus, and a load of the ossicular chain and cochlea was simplified to be expressed by the stiffness of the cochlea. Vibration patterns of the eardrum and ossicles at the first resonance frequency, obtained under these assumptions, were in agreement with the experimental results obtained by means of time-averaged holography and by using a video measuring system, except for the relatively large displacements at the tympanic ring.     

Kaon interferometry in heavy-ion collisions at the CERN SPS

K⁺K⁺ and K^–K^– correlations from S+Pb collisions at 200 GeV/c per nucleon and K⁺K⁺ correlations from p+Pb collisions at 450 GeV/c per nucleon, are presented as measured by the focusing spectrometer of the NA44 experiment at CERN. Multidimensional fits are performed in order to characterize the kaon-emission volume, which is found to be smaller than the pion-emission volume.     

Doppler-shifted cyclotron absorption of electron Bernstein waves via N( parallel)-upshift in a Tokamak plasma

Extraordinary (X) waves are perpendicularly injected for electron Bernstein (B) wave heating into an Ohmically heated plasma from the inboard side in the WT-3 tokamak. Measurements show that absorption does not take place at the electron cyclotron resonance layer nor the upper hybrid resonance layer, but does happen midway between them. This is consistent with the ray tracing prediction, i.e., the poloidal field and poloidal inhomogeneity of toroidal field lead the B waves to have a large parallel refractive index N( parallel) (>1), and the B waves are damped away via the Doppler-shifted cyclotron resonance.     

Signals for scalar top quark atep collider HERA

In the framework of the minimal supersymmetric standard model (MSSM) and theR-parity breaking model (RBM), we investigate production processes of the scalar top (stop) at HERA energies. These models are characterized by the possible existence of the light stop whose mass is lighter than those of the top quark and the other squarks. It is shown that in the MSSM the stop pair production via boson-gluon fusion gives a sizeable cross section and the most serious background $ep \to ec\bar cX$ could be suppressed by appropriate kinematical cuts. We also show that in the RBM the stop is singly produced in the neutral current processes and we have a clear signal as a sharp peak in the Bjorken parameterx distribution of the scattered electron.     

TiO2 nanosized powders controlling by ultrasound sol-gel reaction

We studied that anatase-TiO2 powders prepared from sol-gel process of titanium tetra-isopropoxide (TTIP) were developed under ultrasonic irradiation with different frequency of 28, 45 and 100 kHz. The irradiated ultrasound (US) was controlled by using semi-cylindrical reflection plate that was placed onto the vicinity of reaction vessel. The focused US influenced the reduction of particles size and increased the surface area of resultant nanosized TiO2 powders. We also examined photodegradation of rhodamine 640 dye (Rh-640) solution by the resultant TiO2 under UV light exposure. It was observed that low frequency for TiO2 photocatalyst preparation and low calcination temperature were more affected onto the photodegradation of the dye.