Target-specific chemical acylation of lectins by ligand-tethered DMAP catalysts

Because sugar-binding proteins, so-called lectins, play important roles in many biological phenomena, the lectin-selective labeling should be useful for investigating biological processes involving lectins as well as providing molecular tools for analysis of saccharides and these derivatives. We describe herein a new strategy for lectin-selective labeling based on an acyl transfer reaction directed by ligand-tethered DMAP (4-dimethylaminopyridine). DMAP is an effective acyl transfer catalyst, which can activate an acyl ester for its transfer to a nucleophilic residue. To direct the acyl transfer reaction to a lectin of interest, we attached the DMAP to a saccharide ligand specific for the target lectin. It was clearly demonstrated by biochemical analyses that the target-selective labeling of Congerin II, an animal lectin having selective affinity for Lactose/LacNAc (N-acetyllactosamine), was achieved in the presence of Lac-tethered DMAPs and acyl donors containing probes such as fluorescent molecules or biotin. Conventional peptide mapping experiments using HPLC and tandem mass-mass analysis revealed that the acyl transfer reaction site-specifically occurred at Tyr 51 of Cong II. This strategy was successfully extended to other lectins by changing the ligand part of the ligand-tethered DMAP. We also demonstrated that this labeling method is applicable not only to purified lectin in test tubes, but also to crude mixtures such as E. coli lysates or homogenized animal tissue samples expressing Congerin.     

Acetylene-vinylidene isomerization in ultrashort intense laser fields studied by triple ion-coincidence momentum imaging

The isomerization of acetylene via hydrogen migration in intense laser fields (8 x 10(14) W/cm2) has been investigated by coincidence momentum imaging of the three-body Coulomb explosion process, C2H2 (3+)-->H+ + C+ + CH+. When ultrashort (9 fs) laser pulses are used, the angle between the momenta of C+ and H+ fragments exhibits a sharp distribution peaked at a small angle ( approximately 20 degrees ), showing that the hydrogen atom remains near the original carbon site in the acetylene configuration. On the other hand, a significantly broad distribution extending to larger momentum angles ( approximately 120 degrees ) is observed when the pulse duration is increased to 35 fs, indicating that the ultrafast isomerization to vinylidene is induced in the longer laser pulse.     

Molecular weight recognition in the multiple-stranded helix of a synthetic polymer without specific monomer-monomer interaction

Stereoregular isotactic and syndiotactic poly(methyl methacrylate)s (it- and st-PMMAs) are known to form a multiple-stranded complementary helix, so-called stereocomplex (SC) through van der Waals interactions, which is a rare example of helical supramolecular structures formed by a commodity polymer. In this study, we prepared SCs by using uniform it- and st-PMMAs and those with a narrow molecular weight distribution having different molecular weights and investigated their structures in detail using high-resolution atomic force microscopy as a function of the molecular weight and molecular weight distribution of the component PMMAs. We found that complementary it- and st-PMMAs with the longer molecular length determine the total length of the SC, and molecules of the shorter component associate until they fill up or cover the longer component. These observations support a supramolecular triple-stranded helical structure of the SCs composed of a double-stranded helix of two intertwined it-PMMA chains included in a single helix of st-PMMA, and this triple-stranded helix model of the SCs appears to be applicable to the it- and st-PMMAs having a wide range of molecular weights we employed in this study. In homogeneous double-stranded helices of it-PMMA, it has been found that, in mixtures of two it-PMMAs with different molecular weights, chains of the same molecular weight selectively form a double-stranded it-PMMA helix, or recognize the molecular weights of each other ("molecular sorting"). We thus demonstrate that molecular weight recognition is possible, without any specific interaction between monomer units, through the formation of a topological multiple-stranded helical structure based upon van der Waals interaction.     

Fabrication of dialkyldimethylammonium/vanadium oxide gel hybrid Langmuir-Blodgett membranes

A hybrid Langmuir-Blodgett (LB) membrane of dialkyldimethylammonium (DCnA, n=12?18) and vanadium oxide gel was fabricated by compressing a DC _n A monolayer on an aqueous vanadium oxide solution. The vanadium oxide gel effectively aggregated in situ as a monolayer on the LB trough and stabilized the ammonium monolayer by electrostatic interaction. The hybrid LB monolayer, transferred onto a silicon wafer, had a smooth surface, with less than 1-nm roughness over a 1 μm × 1 μm square area. Multilayered membranes, prepared by repeated transfer of monolayers, showed sharp XRD patterns, assigned as an ordered bilayer-type structure with 2.9–4.8 nm thickness.     

Development of a solid-phase extraction method for determination of pheophorbide a and pyropheophorbide a in health foods by liquid chromatography

A simple solid-phase extraction (SPE) method was developed for the liquid chromatography (LC) determination of pheophorbide (Phor) a and pyropheophorbide (Pyro) a in health foods such as chlorella, spirulina, etc. The food sample was extracted with 85% (v/v) acetone. The extract was acidified with hydrochloric acid and loaded on a C18 cartridge. After washing with water, Phor a and Pyro a were eluted with the LC mobile phase. Phor a and Pyro a were separated by isocratic reversed-phase LC and quantitated by fluorescence detection. The recoveries for spiked samples of chlorella and the extract were 87.1-102.0%. Commercial health foods (chlorella, spirulina, aloe, kale, Jews mallow, and green tea leaves) were analyzed using the SPE method. The values found for Phor a and Pyro a ranged from 2 to 788 microg/g and from <1 to 24 microg/g, respectively. There was no significant difference between the SPE method and the official method in Japan (spectrophotometry after liquid-liquid extraction). The advantages of the SPE method are the short extraction times, lack of emulsions, and reduced consumption of organic solvents compared with the official method in Japan. The SPE method is considered to be useful for the screening of Phor a and Pyro a in health foods.     

Terpenic and phenolic glycosides from leaves of Breynia officinalis HEMSL

From the leaves of Breynia officinalis, collected on Okinawa Island, six terpenic glucosides and six phenolic glycosides were isolated. Two of the terpenic glucosides were found to be known, and they were identified as turpinionoside B and betulalbuside A. The structures of the remaining terpenic glucosides were elucidated to be megastigmane glucosides, named breyniaionosides A-D, using spectroscopic analyses. The absolute structure of breyniaionoside D was determined using the modifed Mosher's method. The absolute structure of the known compound betulalbuside A was determined for the first time in this study. Six phenolic glycosides were found to be arbutin and its derivatives. Two known compounds were found to be robustaside A and eximine. New compounds were named isorobustaside A, and breyniosides A and B, and their structures were elucidated from spectroscopic evidence.     

Photochromism of a diarylethene charge-transfer complex: photochemical control of intermolecular charge-transfer interaction

A diarylethene derivative bearing a phenylenediamine group formed radical ions with an electron acceptor molecule in solution, and the concentration of the radical ions was modulated by the photochromic reaction of the diarylethene, reflecting the difference in the electron-donating character between the open- and closed-ring isomers.     

Photoinduced electron‐transfer reactions of tris(2,2′‐bipyridine)ruthenium(II)‐based carbonic anhydrase inhibitors tethering plural binding sites

Tris(2,2′‐bipyridine)ruthenium(II) complex‐based carbonic anhydrase (CA) inhibitors, [Ru(bpy)₂(bpydbs)]²⁺ {bpy = 2,2′‐bipyridine and bpydbs = 2,2′‐bipyridinyl‐4,4′‐dicarboxilic acid bis[(2‐{2‐[2‐(4‐sulfamoylbenzoylamino)ethoxy]ethoxy}ethyl)amide]} and [Ru(bpydbs)₃]²⁺, tethering plural benzenesulfonamide groups have been prepared. The CA catalytic activity was effectively suppressed by these synthetic [Ru(bpy)₂(bpydbs)]²⁺ and [Ru(bpydbs)₃]²⁺ inhibitors, and their dissociation constants at pH = 7.2 and at 25°C were determined to be K_I = 0.93 ± 0.02 μM and K_I = 0.24 ± 0.03 μM, respectively. Next, 2 photoinduced electron‐transfer (ET) systems comprising a Ru²⁺‐CA complex and an electron acceptor, such as chloropentaamminecobalt(III) ([CoCl(NH₃)₅]²⁺) or methylviologen (MV²⁺) were studied. In the presence of CA and a sacrificial electron acceptor, such as pentaamminechlorocobalt(III) complex, the photoexcited triplet state of ³([Ru(II)]²⁺)* was quenched through an intermolecular photoinduced ET mechanism. In case of the [Ru(bpydbs)₃]²⁺‐CA‐MV²⁺ system, the photoexcited triplet state of ³([Ru(bpydbs)₃]²⁺)* was quenched by sacrificial quencher through an intermolecular photoinduced ET mechanism, giving the oxidized [Ru(bpydbs)₃]³⁺. Then the following intramolecular ET from the amino acid residue, Tyr6, near the active site of CA proceeded. We observed a transient absorption around at 410 nm, arising from the formation of a Tyr^?+ in the [Ru(bpydbs)₃]²⁺‐CA‐MV²⁺ system. These artificial Ru(II)‐CA systems may clearly demonstrate both intermolecular and intramolecular photoinduced ET reactions of protein and could be one of the interesting models of the ET proteins. Their photophysical properties and the detailed ET mechanisms are discussed in order to clarify the multistep ET reactions.     

Closed subsets of the domain whose image has the dimension of the range

It is shown that if dim Y < ∞ and if f(X) = Y is a mapping between compact metric spaces such that 1 ? m ? dim f^-1(y)?n for all y ? Y, then there exists a closed set K ? X such that dim K ? n ? m and dim f(K) = dim Y. This answers a question posed by J. Keesling and D. Wilson.