Exploration of Nano-Saturns: A Spectacular Sphere–Ring Supramolecular System

Saturn-like systems consisting of nanoscale rings and spheres are fascinating motifs in supramolecular chemistry. Several ring molecules are known to include spherical molecules at the center of the cavity via noncovalent attractive interactions. In this Minireview, we generalize the molecular design, the structural features, and the supramolecular chemistry of such “nano-Saturns”, which consist of monocyclic rings and fullerene spheres (mainly C₆₀), on the basis of previous experimental and theoretical studies. Ring molecules are classified into three types (loop, belt, and disk) according to their shapes and possible interactions. Whereas typical belt-shaped rings tend to form tight complexes due to the wide contact area via π–π interactions, flat disk-shaped rings generally form weak complexes due to the narrow contact area mainly via CH–π interactions. In spite of the small association energies, disk-shaped rings are attractive because such rings can mimic the planet Saturn precisely as exemplified by an anthracene cyclic hexamer–C₆₀ complex.     

Maximization of the total population in a reaction–diffusion model with logistic growth

This paper is concerned with a nonlinear optimization problem that naturally arises in population biology. We consider the effect of spatial heterogeneity on the total population of a biological species at a steady state, using a reaction–diffusion logistic model. Our objective is to maximize the total population when resources are distributed in the habitat to control the intrinsic growth rate, but the total amount of resources is limited. It is shown that under some conditions, any local maximizer must be of “bang–bang” type, which gives a partial answer to the conjecture addressed by Ding et al. (Nonlinear Anal Real World Appl 11(2):688–704, 2010). To this purpose, we compute the first and second variations of the total population. When the growth rate is not of bang–bang type, it is shown in some cases that the first variation becomes nonzero and hence the resource distribution is not a local maximizer. When the first variation becomes zero, we prove that the second variation is positive. These results implies that the bang–bang property is essential for the maximization of total population.     

New synthetic routes to optically active alpha-quaternary alpha-aryl amino acid derivatives via the diastereoselective Stevens and Sommelet-Hauser rearrangements

The Stevens rearrangement of N-allylic alpha-aryl amino acid-derived ammonium salts and the Sommelet-Hauser rearrangement of N-benzylic alpha-alkyl amino acid-derived ammonium salts are shown to proceed with remarkably high levels of diastereoselectivity. The methods presented in this work provide new routes to optically active alpha-quaternary alpha-aryl amino acid derivatives.     

Dynamic Lone Pair Expression as Chemical Bonding Origin of Giant Phonon Anharmonicity in Thermoelectric InTe

Loosely bonded (“rattling”) atoms with s² lone pair electrons are usually associated with strong anharmonicity and unexpectedly low thermal conductivity, yet their detailed correlation remains largely unknown. Here we resolve this correlation in thermoelectric InTe by combining chemical bonding analysis, inelastic X-ray and neutron scattering, and first principles phonon calculations. We successfully probe soft low-lying transverse phonons dominated by large In¹⁺ z-axis motions, and their giant anharmonicity. We show that the highly anharmonic phonons arise from the dynamic lone pair expression with unstable occupied antibonding states induced by the covalency between delocalized In¹⁺ 5s² lone pair electrons and Te 5p states. This work pinpoints the microscopic origin of strong anharmonicity driven by rattling atoms with stereochemical lone pair activity, important for designing efficient materials for thermoelectric energy conversion.     

Double helical oligoresorcinols specifically recognize oligosaccharides via heteroduplex formation through noncovalent interactions in water

We report on the oligosaccharide recognition through noncovalent interactions in water based on a unique supramolecular homoduplex-to-heteroduplex transformation of the oligoresorcinol nonamer as a fully artificial receptor. The oligoresorcinol forms a double helix in water, which unravels and entwines upon complexation with specific oligosaccharides with a particular chain length and glucosidic linkage pattern, thus generating the heteroduplex with an excess one-handed helical conformation that can be readily monitored and further quantified by absorption, circular dichroism, and NMR spectroscopies.     

Structure of the monoclinic-form misfit-layer compound, (Ca0.85OH)2alpha CoO2 (alpha approximately 0.57822)

The incommensurate modulated crystal structure of the new misfit-layer calcium cobalt oxide (Ca0.85OH)2alphaCoO2 was investigated using a superspace-group formalism with synchrotron X-ray diffraction data. The compound is a kind of composite crystal that consists of two interpenetrating subsystems, [CoO2]infinity layers containing triangular lattices formed by edge-sharing CoO6 octahedra, separated from each other by [2Ca0.85OH]infinity double-layered rock-salt-type slabs. Both the subsystems are monoclinic lattices with the unit cell parameters, a1 = 2.8180(4) A, b = 4.8938(6) A, c = 8.810(1) A, alpha0 = 95.75(3) degrees , and alpha(=|q|=a1/a2) = 0.57822(8), viz., a2 = 4.8736 A, with Z = 2. A possible superspace group is C2/m(alpha10)s0-C21/m(alpha(-1)10) for the respective subsystems. The atomic positions deviate from the average positions of the fundamental structure due to the incommensurable periodic interaction between the subsystems. A significant structural modulation was found in the [2Ca0.85OH] subsystem, whereas the modulation in the [CoO2] subsystem is less than in [2Ca0.85OH], due to the tight bonding of the close-packed CoO6 octahedra. The degree of modulation in the CoO2 layers, i.e., the potential modulation, is almost the same as those of other compounds of the misfit-layer cobalt oxides. Flattened CoO6 octahedra indicate hole doping into the CoO2 layers. The [2Ca0.85OH] blocks act as the charge reservoir layers, and the defect Ca ions are presumably the source of the holes.     

A Programmable Signaling Molecular Recognition Nanocavity Prepared by Molecular Imprinting and Post‐Imprinting Modifications

Inspired by biosystems, a process is proposed for preparing next‐generation artificial polymer receptors with molecular recognition abilities capable of programmable site‐directed modification following construction of nanocavities to provide multi‐functionality. The proposed strategy involves strictly regulated multi‐step chemical modifications: 1) fabrication of scaffolds by molecular imprinting for use as molecular recognition fields possessing reactive sites for further modifications at pre‐determined positions, and 2) conjugation of appropriate functional groups with the reactive sites by post‐imprinting modifications to develop programmed functionalizations designed prior to polymerization, allowing independent introduction of multiple functional groups. The proposed strategy holds promise as a reliable, affordable, and versatile approach, facilitating the emergence of polymer‐based artificial antibodies bearing desirable functions that are beyond those of natural antibodies.     

Massenspektren der von Aminosäuren bzw. Peptiden abgeleiteten Triazin-Derivate

A mass spectrometric study of about 30 triazine derivatives from amino acids and peptides is reported. These derivatives incorporated the C-terminal of amino acids and peptides in the ring. In contrast to the mass spectra of amino acids and peptide esters reported previously, they always showed characteristic fragments, denoting the presence of the terminal triazine ring. By using this peak as a marker, it is easy to estimate the C-terminal of peptides. In dipeptides, the N-terminal and C-terminal are determined simultaneously.     

Anionic copolymerizations of acrylonitrile with β-propiolactone

Anionic copolymerizations of acrylonitrile (monomer 1) with β-propiolactone (monomer 2) and the structures of the resulting copolymers were studied. The copolymerization with sodium cyanide in N,N-dimethylformamide gave copolymers of the structure I containing acid anhydride linkage in the molecular chains, with the monomer reactivity ratios, r₁ = 1.20, r₂ = 0.00. The copolymerization with potassium hydroxide gave either copolymers of the structure II (r₁ = 0.00, r₂ = 3.64 at 30°C; r₁ = 0.00, r₂ = 5.00 at 40°C) in N,N-dimethylformamide or only β-propiolactone homopolymer in toluene.      

Specific isolation of N-terminal fragments from proteins and their high-fidelity de novo sequencing

A new method to determine N-terminal amino acid sequences of multiple proteins at low pmol level by a parallel processing has been developed. The method contains the following five steps: (1) reduction, S-alkylation and guanidination for targeted proteins; (2) coupling with sulfosucccimidyl-2-(biotinamido)ethyl-1,3-dithiopropionate(sulfo-NHS-SS-biotin) to N(alpha)-amino groups of proteins; (3) digestion of the modified proteins by an appropriate protease; (4) specific isolation of N-terminal fragments of proteins by affinity capture using the biotin-avidin system; (5) de novo sequence analysis of peptides by MALDI-TOF-/MALDI-TOF-PSD mass spectrometry with effective utilization of the CAF (chemically assisted fragmentation) method.1 This method is also effective for N-terminal sequencing of each protein in a mixture of several proteins, and for sequencing components of a multiprotein complex. It is expected to become an essential proteomics tool for identifying proteins, especially when used in combination with a C-terminal sequencing method.