Palladium-catalysed dimerization of vinylarenes using indium triflate as an effective co-catalyst

A palladium-indium triflate catalyst was found to be much more active for the dimerization of vinylarenes compared with generally used cationic palladium(II) catalysts.     

Analysis of aerosols at the bosporus bridge of Istanbul

Air samples collected at the second Bosporus bridge of Istanbul which carries a heavy traffic load between Asia and Europe, were analyzed for 22 elements by the INAA method. Pb, Cd and Fe concentrations in the samples were determined by AAS. Iron concentrations were used as a cross check between the two methods. In order to define the enrichment factors for the elements in the bridge area, a sample collected from our university campus which can be considered as a rural site, was also analyzed. Differences were observed especially for Br, Al, Mg, Ti, Cu and Na between the two sites. Based on the results of the samples from the bridge, we got a value of 0.58(16) for the Br/Pb-ratio.     

On the construction of least favourable pairs of distributions

Summary Convex programming techniques were used by Witting and Krafft in [4] in order to reduce a testing problem for composite hypotheses to one for simple hypotheses. This is realized in terms of least favourable pairs of distributions, which represent the solution of the dual of a suitable program. Without further assumptions on the hypotheses, however, the results, derived that way (cf. Baumann [1], Österreicher [6] and Kusolitsch and Österreicher [5]), are of less practical impact. This is due to the fact that in this case the least favourable pairs depend on the level of the testing problem. Conditions avoiding this, were given by Huber and Strassen in [3]. These conditions make use of 2-alternating capacities in the sense of Choquet. The present paper offers a rather general principle of constructing the least favourable distribution in the case, when one of the two hypotheses is simple. This method works also for the local variation model and the Prohorov neighbourhood model in the case of monotone likelyhood ratio. For simple cases—subsuming the gross error model and the total variation model, for which the solution was given by Huber in [2]—a least favourable pair is obtained by using the mentioned technique of construction two times successively.     

A helical array of pendant fullerenes on a helical poly(phenylacetylene) induced by non-covalent chiral interactions

Novel [60]fullerene-based poly(phenylacetylene)s prepared by the copolymerization of achiral phenylacetylenes bearing a C(60) or crown ether pendant form a one-handed helix upon complexation with L- and D-alanine, yielding a helical array of the pendant fullerenes with a predominant screw-sense along the polymer backbone.     

C36 fullerenes and quasi-fullerenes: computational search through 598 cages

C₃₆ is computed at the SAM1 level and partially also at the HF/4-31G and B3LYP/6-31G^* levels. Altogether 598 cages are generated by a topological Stone–Wales treatment. Three cages contribute by more than 10% to the high-temperature equilibrium isomeric mixture – two conventional fullerenes with D_2d and C_2v symmetries and a C_s quasi-fullerene containing one four-membered ring.     

Analysis of conjugated linoleic acids as 9-anthrylmethyl esters by reversed-phase high-performance liquid chromatography with fluorescence detection

A simple and highly sensitive method for determining the fatty acid composition of food lipids containing conjugated linoleic acid (CLA) is described. The method is based on the separation of the 9-anthrylmethyl ester derivatives of saturated and unsaturated (conjugated and non-conjugated) fatty acids by reversed-phase high-performance liquid chromatography with fluorescence detection. Just like the other fatty acids, CLA reacts readily with 9-anthryldiazomethane at room temperature to produce 9-anthrylmethyl esters without isomerization and decomposition of the conjugated double bonds. Clear resolution of the individual fatty acids as their 9-anthrylmethyl esters is achieved on a highly efficient octadecylsilylated silica column (150- x 3-mm i.d., 3-microm particle size) using a stepwise gradient elution with methanol-water. The method is standardized with commercially available CLA isomers (cis-9, trans-11 and trans-10, cis-12-octadecadienoic acids, and their cis,cis and trans,trans isomers) and applied for determination of the fatty acid compositions of milk and sdairy products.     

Determination of D- and L-amino acids in biological samples by two-dimensional column liquid chromatography

Summary A two-dimensional, column liquid chromatographic system is used for the determination of the D- and L-enantiomers of amino acids in biological samples. Separation of the amino acids is first on ion-exchange column by gradient elution with a sodium citratesodium chloride buffer. Enantioseparation is by subsequent injection of 3 l heart-cuts of the individual amino acids onto a second column with a chiral crown ether stationary phase. Finally, fluorescence detection is after post-column labelling of the amino acids using ano-phthalaldehyde-2-mercaptoethanol reagent solution. The high separation power and selectivity of the system allow processing of complex samples with hardly any additional treatment and the determination of small quantities of D-amino acids in the presence of excess L-form. Applicability of the system is illustrated by the determination of D- and L-aspartate, serine, glutamate and alanine in various complex biological samples, such as protein hydrolysates, urine and biotechnological and food samples. Data are given on detectability, repeatability and linearity.     

Investigation of potential-sensitive fluorescent dyes for application in nitrate sensitive polymer membranes

The applicability of various potential-sensitive dyes (PSD) for optical sensing of anions is reported. Specifically, nitrate-responsive polymer membranes have been developed which are composed of a plasticized polymer, an anion exchange catalyst, and a fluorescent dye. On exposure to nitrate, the fluorescence intensity of such membranes increases, while the wavelengths of the excitation and emission maxima remain virtually unchanged. The membranes typically are 2–4 μm thick and exhibit highest sensitivity to nitrate in the 2 to 200 mgl^–1 range. Signal changes on exposure to 100 mmol/l nitrate can be as high as +300%. The detection limit is 0.2 mgl^–1. The cationic PSD octadecyl acridine organe was tested in combination with a tin-organic and an indium-organic anion carrier rather than with tridodecylmethylammonium chloride, but both carriers were found to display no improved selectivity. Received: 2 December 1995 / Revised: 28 March 1996 / Accepted: 5 April 1996     

Determination of uranium and thorium in Eskişehir-Beylikahir ore samples by delayed neutron counting technique

The Eskiehir-Beylikahir district has the largest and richest thorium and rare earth elements deposits in Turkey. The uranium and thorium concentrations of samples taken from four different parts of this area have been determined by the delayed neutron counting technique. The results are compared with those of previous analyses by other techniques and found to be in good agreement.     

Selective LC Determination of Cabergoline in the Bulk Drug and in Tablets: In Vitro Dissolution Studies

Cabergoline (CAB) is an ergot alkaloid derivative with dopamine agonist activity. A novel, simple, and rapid stability-indicating high-performance liquid chromatographic (HPLC) method for assay of CAB in tablets has been developed and validated. Chromatography was performed on a 4.6 mm i.d. × 250 mm, 5 μm particle, cyano column with acetonitrile–10 mM phosphoric acid, 35:65 (v/v), containing 0.04% triethylamine, as mobile phase, at a flow rate of 1.0 mL min^?1, and UV detection at 280 nm. Response was a linear function of concentration in the range 0.1–4 μg mL^?1 (r ² = 0.9999). The recovery of the method was good (99.45%) and RSD values for intra-day and inter-day precision were 0.24–0.88% and 0.66–1.19%, respectively. The method can be used for quality-control assay of CAB in tablets, for stability studies, and for in vitro dissolution studies.