Dynamic Lone Pair Expression as Chemical Bonding Origin of Giant Phonon Anharmonicity in Thermoelectric InTe

Loosely bonded (“rattling”) atoms with s² lone pair electrons are usually associated with strong anharmonicity and unexpectedly low thermal conductivity, yet their detailed correlation remains largely unknown. Here we resolve this correlation in thermoelectric InTe by combining chemical bonding analysis, inelastic X-ray and neutron scattering, and first principles phonon calculations. We successfully probe soft low-lying transverse phonons dominated by large In¹⁺ z-axis motions, and their giant anharmonicity. We show that the highly anharmonic phonons arise from the dynamic lone pair expression with unstable occupied antibonding states induced by the covalency between delocalized In¹⁺ 5s² lone pair electrons and Te 5p states. This work pinpoints the microscopic origin of strong anharmonicity driven by rattling atoms with stereochemical lone pair activity, important for designing efficient materials for thermoelectric energy conversion.     

Alkyl-functionalized organic dyes for efficient molecular photovoltaics

We designed and synthesized new alkyl-functionalized organic dyes, MK-1 and MK-2, for dye-sensitized solar cells (DSSCs). Based on the MK-2 dye, a high performance of efficiency (eta, 7.7%; short-circuit current density Jsc = 14.0 mA cm-2, open-circuit voltage Voc = 0.74 V, and fill factor FF = 0.74) was achieved under AM 1.5 G irradiation (100 mW cm-2). Remarkably, the relatively higher Voc for DSSCs based on MK-1 and MK-2 dyes, which have long alkyl chains, were observed among the organic dyes caused by the increasing of the electron lifetime in the conduction band of TiO2. Our molecular design of alkyl-functionalized dyes strongly suggests the promising performance of molecular photovoltaics based on organic dyes.     

Mechanism of antioxidant capacity assays and the CUPRAC (cupric ion reducing antioxidant capacity) assay

We report on the application of a simple and versatile antioxidant capacity assay for dietary polyphenols, vitamin C and vitamin E utilizing the copper(II)-neocuproine (Cu(II)-Nc) reagent as the chromogenic oxidant, which we term the CUPRAC (cupric reducing antioxidant capacity) method. It involves mixing the antioxidant solution (directly or after acid hydrolysis) with solutions of CuCl₂, neocuproine, and ammonium acetate at pH 7, and measuring the absorbance at 450 nm after 30 min. Slowly reacting antioxidants required an incubation at 50 °C for 20 min for color development. The flavonoid glycosides were hydrolyzed to their corresponding aglycones by refluxing in 1.2 M HCl-containing 50% MeOH for fully exhibiting their antioxidant potencies. Certain compounds also needed incubation after acid hydrolysis for color development. The CUPRAC absorbances of mixture constituents were additive, indicating lack of chemical deviations from Beer’s law. The CUPRAC antioxidant capacities of a wide range of polyphenolics are reported in this work and compared to those found by ABTS/persulfate and Folin assays. The trolox-equivalent capacities of the antioxidants were linearly correlated (r = 0.8) to those found by ABTS but not to those of Folin. The highest antioxidant capacities in the CUPRAC method were observed for epicatechin gallate, epigallocatechin gallate, quercetin, fisetin, epigallocatechin, catechin, caffeic acid, epicatechin, gallic acid, rutin, and chlorogenic acid in this order, in accordance with theoretical expectations. The experiences of other CUPRAC users also are summarized. Correspondence: Reşat Apak, Department of Chemistry, Faculty of Engineering, Istanbul University, Avcilar, TR-34320 Istanbul, Turkey     

Photoswitchable organocatalysis in acylation of alcohol using dithienylethene-linked azoles

Three novel dithienylethenes bearing azole derivatives were synthesized and found to undergo reversible photocyclization of the dithienylethene units upon alternate irradiation with UV and visible light. Among them, the dithienylethene-linked imidazole and N-phenylimidazole exhibited a relatively high organocatalytic activity for the acylation of 2-decanol with acetic anhydride, and the catalytic activity of the dithienylethene-linked imidazole could be switched by reversible photoinduced cyclization/cycloreversion of the dithienylethene unit.     

Synthesis and characterization of new 4,5-dihydropyrazol-1-yl derivatives

In this study, first, a series of chalcone compounds S1–S6 were synthesized from various acetophenone derivatives (acetophenone, p-methyl acetophenone, and p-methoxy acetophenone) and aromatic aldehyde derivatives (benzaldehyde, p-methyl benzaldehyde, and p-methoxy benzaldehyde) by the Claisen–Schmidt condensation reaction. These S1–S6 compounds were then used in the preparation of 4,5-dihydropyrazol-1-yl derivatives S7–S15. Finally, four new compounds S16–S19 were synthesized from compound (S7, S8, S9, and S12) and 2,4-dinitrophenylhydrazine. Therefore, three known and ten new heterocyclic compounds were synthesized and completely characterized using ¹H NMR, ¹³C NMR, IR, and elemental analysis.     

Double helical oligoresorcinols specifically recognize oligosaccharides via heteroduplex formation through noncovalent interactions in water

We report on the oligosaccharide recognition through noncovalent interactions in water based on a unique supramolecular homoduplex-to-heteroduplex transformation of the oligoresorcinol nonamer as a fully artificial receptor. The oligoresorcinol forms a double helix in water, which unravels and entwines upon complexation with specific oligosaccharides with a particular chain length and glucosidic linkage pattern, thus generating the heteroduplex with an excess one-handed helical conformation that can be readily monitored and further quantified by absorption, circular dichroism, and NMR spectroscopies.     

Long-range magnetic ordering of quasi-one-dimensional S=1/2 Heisenberg antiferromagnet Sr2Cu(PO4)2

Magnetic properties of quasi-one-dimensional S=1/2 Heisenberg antiferromagnet Sr₂Cu(PO₄)₂ were investigated by temperature and field dependence of AC susceptibility down to 0.03 K. A sharp peak was observed at on the temperature dependence of AC susceptibility indicating long-range magnetic ordering. Taking into account the exchange constant, (Hamiltonian =J∑S_iS_i+1), the ratio k_BT_N/J is 0.06%. Sr₂Cu(PO₄)₂ is, therefore, one of the best one-dimensional Heisenberg antiferromagnet known so far.     

Adsorption of cationic cellulose derivative/anionic surfactant complexes onto solid surfaces. II. Hydrophobized silica surfaces

The effect of the anionic surfactant SDS (sodium dodecyl sulfate) on the adsorption behavior of cationic hydroxyethyl cellulose (Polymer JR-400) and hydrophobically modified cationic cellulose (Quatrisoft LM-200) at hydrophobized silica has been investigated by null ellipsometry and compared with the previous data for adsorption onto hydrophilic silica surfaces. The adsorbed amount of LM-200 is found to be considerably larger than the adsorbed amount of JR-400 at both surfaces. Both polymers had higher affinity toward hydrophobized silica than to silica. The effect of SDS on polymer adsorption was studied under two different conditions: adsorption of polymer/SDS complexes from premixed solutions and addition of SDS to preadsorbed polymer layers. Association of the surfactant to the polymer seems to control the interfacial behavior, which depends on the surfactant concentration. For the JR-400/SDS complex, the adsorbed amount on hydrophobized silica started to increase progressively from much lower SDS concentrations, while the adsorbed amount on silica increased sharply only slightly below the phase separation region. For the LM-200/SDS complex, the adsorbed amounts increased progressively from very low SDS concentrations at both surfaces, and no large difference in the adsorption behavior was observed between two surfaces below the phase separation region. The complex desorbed from the surface at high SDS concentrations above the critical micelle concentration. The reversibility of the adsorption of polymer/SDS complexes upon rinsing was also investigated. When the premixed polymer/SDS solutions at high SDS concentrations (>5 mM) were diluted by adding water, the adsorbed amount increased due to the precipitation of the complex. The effect of the rinsing process on the adsorbed layer was determined by the hydrophobicity of the polymer and the surface.     

Electrochemical properties of Li symmetric solid-state cell with NASICON-type solid electrolyte and electrodes

All-solid-state phosphate symmetric cells using Li₃V₂(PO₄)₃ for both the positive and negative electrodes with the phosphate Li_1.5Al_0.5Ge_1.5(PO₄)₃ as the solid electrolyte were proposed. Amorphous Li_1.5Al_0.5Ge_1.5(PO₄)₃ was added into the electrode to increase the interface area between the active materials and the electrolyte. Any other phases were not formed at the electrode/electrolyte interface even after hot pressing at 600 °C. The discharge capacity was 92 mAh g^? 1 at 22 µA cm^? 2 at 80 °C, and 38 mAh g^? 1 at 25 °C, respectively. Symmetric cell configuration leads to simplify the fabrication process for all-solid-state batteries and will reduce manufacturing costs.     

A facile method for the stereoselective preparation of (1E,3E)-4-substituted-1-amino-1,3-dienes via 1,4-elimination

The 1,4-elimination reaction of 1-amino-4-methoxy-(2Z)-alkenes is shown to proceed with high (1E,3E)-stereoselectivities to afford the corresponding 4-substituted-1-amino-1,3-dienes in good yield. The scope and stereochemical features of the synthetic method are described.