Vanishing Shear Viscosity Limit in the Magnetohydrodynamic Equations

We study an initial boundary value problem for the equations of plane magnetohydrodynamic compressible flows, and prove that as the shear viscosity goes to zero, global weak solutions converge to a solution of the original equations with zero shear viscosity. As a by-product, this paper improves the related results obtained by Frid and Shelukhin for the case when the magnetic effect is neglected. Supported by NSFC (Grant No. 10301014, 10225105) and the National Basic Research Program (Grant No. 2005CB321700) of China.     

High-resolution electron microscopy of microstructure of MnF2 subjected to shock compression at 4.4 GPa

Microstructure of MnF₂ subjected to by shock compression at 4.4 GPa was examined using transmission electron microscopy (TEM). Lamellar structure consisting of twin-related domains of rutile-structure and intergrowth of α- PbO₂-type phase is observed in the electron diffraction pattern and TEM images. The crystallographic relationship between rutile and α- PbO₂-type phases can be expressed as and .     

Two-dimensional measurement of laser-induced target movement by face-on interferometry

Initial movement of laser irradiated foil targets has been measured by face-on interferometry with two-dimensional resolution. This interferometric method provides direct and precise information about the initial movement of the rear surface of the target compared with conventional diagnostics. Target movement of 20–500 nm from the original position has been observed.     

Magnetic properties of La-Co substituted M-type strontium hexaferrites prepared by polymerizable complex method

Magnetic properties of La-Co substituted M-type strontium hexaferrites were studied. The samples were prepared by polymerizable complex method. Crystal structure of samples has been investigated by powder X-ray diffraction (XRD). Single-phase M-type strontium hexaferrites with chemical composition of Sr_1.05−xLa_xFe_12−xCo_xO₁₉ (x=0-0.4) were formed by heating at 1173 K for 24 h in air. Magnetic properties were discussed by measurements of M-H curves with vibrating sample magnetometer (VSM). La-Co substituted M-type strontium hexaferrites prepared by polymerizable complex method showed typical magnetic hysteresis of hard ferrite. The coercive force increased significantly by La-Co substitution with polymerizable complex method. Maximum coercive force achieved in this study is 8.0 kOe (640 kA/m). Scanning electron microscopy revealed that the prepared ferrite particles have plate-like shape of diameter range between 20 and 500 nm.     

Investigation of debris dynamics from laser-produced tin plasma for EUV lithography light source

The dynamics of debris from the laser-produced tin (Sn) plasma was investigated for an extreme ultraviolet light source in order to establish the guideline for the optimum design of a mitigation system, such as a mass-limited target. The dissemination of the Sn atoms from the different shapes of a wire and a mass-limited droplet target were investigated using the laser-induced fluorescence (LIF) imaging method. The Sn droplet targets with a diameter in the range of 5 to 17 μm were prepared by a new droplet generating technique using a pulsed laser. There was a large difference in the angular distribution of Sn atoms in the plane parallel and perpendicular to the wire axis, indicating the curvature of the target surface governed the angular distribution of the ablated species. The spatial distributions of Sn atoms from the droplet targets were similar to those from the curved surface of the wire targets. The ablation dynamics of the droplet observed by a high-speed imaging camera is also discussed.     

Performance of GPRML-AR system in perpendicular magnetic recording channel with thermal decay

The bit-error rate (BER) performance of the generalized partial response maximum likelihood with autoregressive (GPRML-AR) channel model system in perpendicular magnetic recording (PMR) channel with thermal decay is obtained. The 128/130(0,16/8) run-length-limited (RLL) code is used as a recording code. The GPR channel consists of the PR1 channel followed by the reduction circuit of predicted noise. The BER performance is evaluated by computer simulation using a thermal decay model. The model has been obtained by using an approximate equation that represents amplitude degradation of the reproducing waveform with elapsed time based on the experimental data for CoPtCr-SiO₂ PMR media. The Viterbi detector with an AR channel model is employed. Furthermore, long-term degradation of the required SNR to achieve a BER of 10⁻⁴ with elapsed time is obtained and the performance is compared with that of PR1ML system. The results show that the poorer the thermal stability of the medium becomes, the larger the SNR gain of the GPR1ML-AR system over the PR1ML system becomes. The SNR gain also increases with elapsed time.     

Spin fluctuations of Y(Mn1−xAlx)2 and Y1−xScxMn2

The thermal expansion and low temperature and low temperature specific heat were measured for Y_1−xScxMn2. The results are discussed in terms of spin fluctuations and compared with those of Y(Mn_1−xAl_x)₂, which show al local moment character. It is revealed that Y_1−xSc_xMn₂ is a typical nearly antiferromagnet in which giant spin fluctuations are thermally excited.