Optimization of SIMS analytical parameters for water content measurement of olivine

Secondary ion mass spectrometry (SIMS) has a wide range of applications in Earth Science research, thanks to its high precision and sensitivity, and its capacity in direct insitu micromeasurement. The technique is operated in ultra-high vacuum (UHV) conditions, especially for the measurement of volatiles such as hydrogen, or the water content in nominally anhydrous minerals (NAMs). To minimize the water background and obtain accurate and precise water contents in NAMs (eg, olivine) critical parameters such as presputtering time, field aperture (FA), dynamic transfer on/off, and primary beam current intensity were investigated for a CAMECA IMS 1280-HR system. When the chamber vacuum reaches approximately 2 × 10⁻⁹ mbar, we set the DTOS OFF, raster size to 50 μm and primary beam current to 5 nA, and used 2000 μm FA and 170-second presputtering time. Consequently, an approximately 1.2 ppmw water background and 3.6 ppmw limit of detection (LOD) were yielded, from analyzing the San Carlos olivine. Meanwhile, the water content and homogeneity of a range of olivine minerals were characterized for potential use as reference materials for SIMS water content measurement. Olivine water content calibration curve was also established by comparing the Fourier transform infrared (FTIR) results with the SIMS-measured ¹⁶O¹H⁻/¹⁶O⁻ ratios. Accuracy and precision of water content measurement were estimated to be better than approximately 10% in this study.     

Photopolyaddition of dithiols to bis(alkoxyallene)s

Polyadditions of 1,4-benzenedithiol (BDT) to bis(alkoxyallene)s, such as 1,4-bis(allenyloxy)xylene (3) and 1,4-bis(allenyloxy) benzene (4) , were carried out in benzene at 25°C by irradiation with a high pressure mercury lamp. Thiol groups were added to the terminal double bonds of the allenyloxy groups selectively to afford polymers containing reactive carbon–carbon double bonds in the main chain, similar to the radical polyadditions using azobis(isobutyronitrile) (AIBN). The molecular weight of the polymer obtained from BDT and 3 was 10 times higher than that of the polymer produced in the radical polyaddition with AIBN; whereas the molecular weight of the polymer from BDT and 4 was similar to that in the radical polyaddition, probably because of poor solubility of 4 and the polymer toward benzene. The geometrical structure of carbon–carbon double bonds in the polymer isomerized from an E to Z structure with reaction time by virtue of both the addition elimination of thiyl radical to the double bonds and the UV irradiation. © 1996 John Wiley & Sons, Inc.     

A hydrogel with rubber elasticity transition

Reaction between dimethyldivinylsilane and 3,6-diazaoctane in the presence of 3-lithio-3,6-diazaoctane yields a new telechelic oligomer, poly(silamine), which consists of alternating 3,3-dimethyl-3-silapentane and N,N′-diethylethylenediamine units in the main chain. Poly(silamine) shows unique phase transition properties in response to the degree of protonation of amino groups in the polymer. Poly(silamine) also shows a strong interaction with several anions. Due to the interaction between poly(silamine) and anions along with the protonation of amino groups in the poly(silamine), the rubber elasticity of poly(silamine) is drastically changed. A discrete volume change can be observed when the environmental pH of the poly(silamine) gels is varied. This can be explained not only by a change in ionic osmotic pressure but also by a change in the rubber elasticity of the networks in the gel.     

The synthesis and thermal property of sodium cyclo-octaphosphate

Sodium cyclo-octaphosphate heptahydrate, (NaPO₃)₈ · 7H₂O, has been made by heating lead cyclo-tetraphosphate at 340°C, dissolving the thermal product in a 3% aqueous solution of tetrasodium ethylene-diaminetetraacetate, and then crystallizing it by addition of sodium chloride and acetone to the solution. When the cyclo-octaphosphate was heated up to 400°C, it decomposed to produce phosphates with both shorter and longer chain lengths. A main product at 300° to 350°C was sodium cyclo-triphosphate, and the thermal product melted at about 630°C.     

Trypanocidal terpenoids from Laurus nobilis L

Trypanocidal constituents of dried leaves of Laurus nobilis L. (Lauraceae) were examined. Activity-guided fractionation of the methanol extract resulted in the isolation of two guaianolides, dehydrocostus lactone (1) and zaluzanin D (2), and a new p-menthane hydroperoxide, (1R,4S)-1-hydroperoxy-p-menth-2-en-8-ol acetate (3). The minimum lethal concentrations of these compounds against epimastigotes of Trypanosoma cruzi were 6.3, 2.5, and 1.4 microM, respectively.     

Extremely low vertical-emittance beam in the accelerator test facility at KEK

Electron beams with the lowest, normalized transverse emittance recorded so far were produced and confirmed in single-bunch-mode operation of the Accelerator Test Facility at KEK. We established a tuning method of the damping ring which achieves a small vertical dispersion and small x-y orbit coupling. The vertical emittance was less than 1% of the horizontal emittance. At the zero-intensity limit, the vertical normalized emittance was less than 2.8 x 10(-8) rad m at beam energy 1.3 GeV. At high intensity, strong effects of intrabeam scattering were observed, which had been expected in view of the extremely high particle density due to the small transverse emittance.     

Evolution of magnetism in U(Ni 1- xPd x) Si single crystals

Single crystals of U(Ni_1-xPd_x)₂Si₂ with x = 0.05, 0.09 and 0.135 have been grown. Magnetization and electrical resistivity measurements were performed in a wide range of temperatures and magnetic fields in order to study stability of magnetic phases in the solid solutions between UNi₂Si₂ and UPd₂Si₂ with a special emphasis on the type of ground state. In UPd₂Si₂ the simple AFI-type antiferromagnetic structure of U moments is observed at low temperatures. UNi₂Si₂ adopts the uncompensated AF structure (UAF) with the + + - stacking of U moments along the c-axis and consequently this compound exhibits a spontaneous magnetization corresponding to 1/3 of the U moment. The substitution of Pd for Ni leads to a rapid decay of the spontaneous magnetization. The evolution of magnetization and electrical resistivity behavior with Pd doping is tentatively attributed to the coexistence of the AF-I and UAF phases in the ground state of U(Ni_0.91Pd_0.09)₂Si₂ and U(Ni_0.865Pd_0.135)₂Si₂. In this scenario, the volume fraction of the AF-I phase rapidly grows with Pd doping on account of the UAF. At lowest temperatures an irreversible transition to the UAF phase is observed when a sufficiently high magnetic field is applied along the c-axis. Received 28 March 2002 / Received in final form 8 August 2002 Published online 19 December 2002 RID="a" ID="a"e-mail: sech@mag.mff.cuni.cz     

Giant two-photon absorption due to excitonic molecule

The direct excitation of excitonic molecule due to the two-photon absorption process is shown to be strongly enhanced because of two effects of the resonance and the giant oscillator strength as known for the bound exciton. Then it is pointed out that the existence of the excitonic molecule can be confirmed also by this two-photon absorption spectroscopy. We discuss also the property of the excitonic molecules highly excited by this method.