Preparation and characterization of hollow spheres of rutile

Hollow spherical particles of rutile were obtained by coating colloidal polystyrene beads with a titanium oxide hydrate layer and subsequently calcining at elevated temperatures under an oxygen atmosphere. In order to investigate the optimum conditions for the preparation of these hollow beads the maximum temperature and heating rate were systematically varied. The dimensions of the voids and the shell thickness of the hollow beads can be tailored by the size of the polystyrene beads and the thickness of the inorganic layer, respectively.     

Remote sensing volatile elements for new signatures from underground nuclear explosions

Heavy metals and radionuclides were investigated in the northern coastal zone of Ikaria Island. The collected sediment samples are sandy and they contain distinct heavy metal- and actinide-hosting minerals. All samples exhibit low U and Th content relative to granitic rocks of Aegean islands. The enrichment factor indicates an anthropogenic enrichment in As and Pb due to boat pigments. The radioactivity is mainly attributed to ⁴⁰K (up to 1480 Bq kg^?1) and ²³²Th radionuclide series. The natural radioactivity of the northern coastal zone is lower compared to that of the southern coast where renowned thermal springs are located.     

Li[B(OCH2CF3)4]: Synthesis,Characterization and Electrochemical Application as a Conducting Salt for LiSB Batteries

A new Li salt with views to success in electrolytes is synthesized in excellent yields from lithium borohydride with excess 2,2,2‐trifluorethanol (HOTfe) in toluene and at least two equivalents of 1,2‐dimethoxyethane (DME). The salt Li[B(OTfe)₄] is obtained in multigram scale without impurities, as long as DME is present during the reaction. It is characterized by heteronuclear magnetic resonance and vibrational spectroscopy (IR and Raman), has high thermal stability (T_{decomposition}>271 °C, DSC) and shows long‐term stability in water. The concentration‐dependent electrical conductivity of Li[B(OTfe)₄] is measured in water, acetone, EC/DMC, EC/DMC/DME, ethyl acetate and THF at RT In DME (0.8 mol L ^?1) it is 3.9 mS cm^?1, which is satisfactory for the use in lithium‐sulfur batteries (LiSB). Cyclic voltammetry confirms the electrochemical stability of Li[B(OTfe)₄] in a potential range of 0 to 4.8 V vs. Li/Li⁺. The performance of Li[B(OTfe)₄] as conducting salt in a 0.2 mol L ^?1 solution in 1:1 wt % DME/DOL is investigated in LiSB test cells. After the 40th cycle, 86 % of the capacity remains, with a coulombic efficiency of around 97 % for each cycle. This indicates a considerable performance improvement for LiSB, if compared to the standard Li[NTf₂]/DOL/DME electrolyte system.     

Analytical atomic spectroscopy using ion trap devices

Investigations using ion trap devices for analytical atomic spectroscopy purposes have focused on the use of an inductively coupled plasma (ICP) ion source with ion trap mass spectrometric (ITMS) detection. Initial studies were conducted with an instrument assembled by simply appending an ion trap as the detector to a fairly conventional ICP/MS instrument, i.e. leaving an intermediate linear quadrupole between the plasma source and the ion trap. The principal advantages found with this system include the destruction of nearly all problematic and typical ICP/MS polyatomic ions (e.g., ArH(+), ArO(+), ArCl(+), Ar(2)(+), etc) and a dramatic reduction of the primary plasma source ion, Ar(+). These results prompted the development of a second-generation plasma source ion trap instrument in which direct coupling of the ICP and ion trap has been effected (i.e. no intermediate linear quadrupole); the same performance benefits have been largely preserved. Initial operation of this instrument is described, characterized, and compared to the originally described ICP/ITMS and conventional ICP/MS systems. In addition, experiments aimed at improving ICP/ITMS sensitivity and selectivity using broadband resonance excitation techniques are described. Finally, the potential for laser optical detection of trapped ions for analytical purposes is speculated upon.     

Porous chromatographic materials as substrates for preparing synthetic nuclear explosion debris particles

Several porous chromatographic materials were investigated as synthetic substrates for preparing surrogate nuclear explosion debris particles. Eighteen metals, including some of forensic interest, were loaded onto materials by immersing them in metal solutions (556 mg/L of each metal) to fill the pores, applying gentle heat (110 °C) to drive off water, and then treating them at high temperatures (up to 800 °C) in air to form less soluble metal species. High-boiling-point metals were uniformly loaded on spherical controlled-pore glass to emulate early fallout, whereas low-boiling-point metals were loaded on core–shell silica to represent coated particles formed later in the nuclear fallout-formation process. Analytical studies characterized material balance and the formation of recalcitrant species. Metal loading was 1.5–3 times higher than expected from the pore volume alone, a result attributed to surface coating. Most metals were passively loaded; that is, solutions filled the pores without active metal discrimination. However, niobium and tin concentrations were lower in solutions after pore filling, and were found in elevated concentrations in the final products, indicating selective loading. High-temperature treatments caused reduced solubility of several metals, and the loss of some volatile species (rhenium and tellurium). Sample preparation reproducibility was high (the inter- and intra-batch relative standard deviations were 7.8 and 0.84 %, respectively) indicating suitability for use as a working standard for analytical methods development. We anticipate future standardized radionuclide-loaded materials will find use in radioanalytical methods development and/or serve as a starting material for the synthesis of more complex nuclear explosion debris forms (e.g., Trinitite).     

Isotopic analysis of uranium in NIST SRM glass by femtosecond laser ablation MC-ICPMS

We employed femtosecond Laser Ablation Multicollector Inductively Coupled Mass Spectrometry for the determination of uranium isotope ratios in a series of standard reference material glasses (NIST 610, 612, 614, and 616). The uranium in this series of SRM glasses is a combination of isotopically natural uranium in the materials used to make the glass matrix and isotopically depleted uranium added to increase the uranium elemental concentration across the series. Results for NIST 610 are in excellent agreement with literature values. However, other than atom percent ²³⁵U, little information is available for the remaining glasses. We present atom percent and isotope ratios for ²³⁴U, ²³⁵U, ²³⁶U, and ²³⁸U for all four glasses. Our results show deviations from the certificate values for the atom percent ²³⁵U, indicating the need for further examination of the uranium isotopes in NIST 610-616.