Structure-specificity relationship of cardiac glycosides as a substrate for glucohydrolase II

Cardenolide glucohydrolase II (CGH II) is a cardenolide-specific glucohydrolase obtained from Digitalis lanata leaves. We investigated the structure-specificity relationship of several cardenolide disaccharides as a substrate for CGH II. Conformation analysis of the substrates was performed using molecular mechanics calculations. The sugar chain conformation of two inert glycosides was significantly different from that of the other glycosides. The other two glycosides, which were weak substrates of CGH II, were suggested to have an intramolecular hydrogen bond between the sugar groups. It was deduced that this hydrogen bond restricts the conformational change of the sugar chain and prevents the glycosides from enzymatic recognition.     

Structure and dioxygen-reactivity of copper(I) complexes supported by bis(6-methylpyridin-2-ylmethyl)amine tridentate ligands

The structure and dioxygen-reactivity of copper(I) complexes R supported by N,N-bis(6-methylpyridin-2-ylmethyl)amine tridentate ligands L2R[R (N-alkyl substituent)=-CH2Ph (Bn), -CH2CH2Ph (Phe) and -CH2CHPh2(PhePh)] have been examined and compared with those of copper(I) complex (Phe) of N,N-bis[2-(pyridin-2-yl)ethyl]amine tridentate ligand L1(Phe) and copper(I) complex (Phe) of N,N-bis(pyridin-2-ylmethyl)amine tridentate ligand L3(Phe). Copper(I) complexes (Phe) and (PhePh) exhibited a distorted trigonal pyramidal structure involving a d-pi interaction with an eta1-binding mode between the metal ion and one of the ortho-carbon atoms of the phenyl group of the N-alkyl substituent [-CH2CH2Ph (Phe) and -CH2CHPh2(PhePh)]. The strength of the d-pi interaction in (Phe) and (PhePh) was weaker than that of the d-pi interaction with an eta2-binding mode in (Phe) but stronger than that of the eta1 d-pi interaction in (Phe). Existence of a weak d-pi interaction in (Bn) in solution was also explored, but its binding mode was not clear. Redox potentials of the copper(I) complexes (E1/2) were also affected by the supporting ligand; the order of E1/2 was Phe>R>Phe. Thus, the order of electron-donor ability of the ligand is L1Phe相似文献   

Catalytic asymmetric syntheses and biological activities of singly dehydroxylated 19-nor-1alpha,25-dihydroxyvitamin D(3) A-ring analogs in cancer cell differentiation and apoptosis

BACKGROUND: 1alpha,25-Dihydroxyvitamin D(3) (1alpha,25(OH)(2)D(3)) has been shown to modulate not only proliferation and differentiation, but also apoptosis in malignant cells, indicating that it could be useful for treating cancer. Little information is available concerning the structural motifs of the 1alpha, 25(OH)(2)D(3) molecule responsible for modulation of differentiation and apoptosis, however. We set out to synthesize singly dehydroxylated A-ring analogs of 19-nor-1alpha,25(OH)(2)D(3) in a catalytic asymmetric fashion, and to investigate their biological activities in leukemia HL-60 cells. RESULTS: A series of singly dehydroxylated 19-nor-1alpha,25-dihydroxyvitamin D(3) A-ring analogs were synthesized using a combinatiorial sequence of regioselective propiolate-ene reaction and catalytic asymmetric carbonyl-ene cyclization. Surprisingly, the analogs could be clearly divided into two categories; one group, bearing 1alpha-hydroxy or 3beta-hydroxy groups in the A-ring, were potent differentiators and the second group, bearing 1beta-hydroxy or 3alpha-hydroxy groups, were potent stimulators of apoptosis. CONCLUSIONS: We have clearly identified the structural motifs of 19-nor-1alpha,25(OH)(2)D(3) analogs responsible for differentiation and apoptosis in HL-60 cells. These findings will provide useful information not only for development of therapeutic agents for treatment of leukemia and other cancers, but also for structure-function studies of 1alpha,25(OH)(2)D(3).     

Development of fast disintegrating compressed tablets using amino acid as disintegration accelerator: evaluation of wetting and disintegration of tablet on the basis of surface free energy

A fast disintegrating compressed tablet was formulated using amino acids, such as L-lysine HCl, L-alanine, glycine and L-tyrosine as disintegration accelerator. The tablets having the hardness of about 4 kgf were prepared and the effect of amino acids on the wetting time and disintegration time in the oral cavity of tablets was examined on the basis of surface free energy of amino acids. The wetting time of the tablets increased in the order of L-lysine HCl, L-alanine, glycine and L-tyrosine, whereas the disintegration time in the oral cavity of the tablets increased in the order of L-alanine, glycine, L-lysine HCl and L-tyrosine. These behaviors were well analyzed by the introduction of surface free energy. When the polar component of amino acid was large value or the dispersion component was small value, faster wetting of tablet was observed. When the dispersion component of amino acid was large value or the dispersion component was small value, faster disintegration of tablet was observed, expect of L-tyrosine tablet. The fast disintegration of tablets was explained by the theory presented by Matsumaru.     

Adsorption of cationic cellulose derivative/anionic surfactant complexes onto solid surfaces. II. Hydrophobized silica surfaces

The effect of the anionic surfactant SDS (sodium dodecyl sulfate) on the adsorption behavior of cationic hydroxyethyl cellulose (Polymer JR-400) and hydrophobically modified cationic cellulose (Quatrisoft LM-200) at hydrophobized silica has been investigated by null ellipsometry and compared with the previous data for adsorption onto hydrophilic silica surfaces. The adsorbed amount of LM-200 is found to be considerably larger than the adsorbed amount of JR-400 at both surfaces. Both polymers had higher affinity toward hydrophobized silica than to silica. The effect of SDS on polymer adsorption was studied under two different conditions: adsorption of polymer/SDS complexes from premixed solutions and addition of SDS to preadsorbed polymer layers. Association of the surfactant to the polymer seems to control the interfacial behavior, which depends on the surfactant concentration. For the JR-400/SDS complex, the adsorbed amount on hydrophobized silica started to increase progressively from much lower SDS concentrations, while the adsorbed amount on silica increased sharply only slightly below the phase separation region. For the LM-200/SDS complex, the adsorbed amounts increased progressively from very low SDS concentrations at both surfaces, and no large difference in the adsorption behavior was observed between two surfaces below the phase separation region. The complex desorbed from the surface at high SDS concentrations above the critical micelle concentration. The reversibility of the adsorption of polymer/SDS complexes upon rinsing was also investigated. When the premixed polymer/SDS solutions at high SDS concentrations (>5 mM) were diluted by adding water, the adsorbed amount increased due to the precipitation of the complex. The effect of the rinsing process on the adsorbed layer was determined by the hydrophobicity of the polymer and the surface.     

Preconcentration of palladium(II) from water with thionalide loaded on silica gel

2-Mercapto-N-2-naphthylacetamide (thionalide) on silica gel is used for rapid preconcentration of μg l^?1 levels of palladium(II) from aqueous solution, followed by atomic absorption spectrometric measurement. In batch experiments, palladium was quantitatively retained on the gel from solutions 5 M in acid to pH 8; equilibrium was achieved within 10 s. The chelating capacity of the gel was 7.5 μmol Pd g^?1 at pH < 4. The effect of flow rate on retention was studied. Palladium retained on the column was completely eluted with 20 ml of 0.2 M thiourea in 0.1 M hydrochloric acid. The palladium concentration in sea water is shown to be < 0.3 μg l^?1.     

Application of microcalorimetry to the formulation study

Isothermal microcalorimetry was used to evaluate excipient compatibility of solid dosage form. Oxybutynin hydrochloride and cefaclor were used as model drugs for compatibility test with excipients. The calorimetric data for compatibility test were compared with those of HPLC data. Evaluation of compatibility between drug and excipient of solid dosage form might be possible to use isothermal microcalorimetry instead of conventional method. By using microcalorimetric method, the evaluation of the compatibility between drug and excipient could be successfully performed with a simple operation in a short time. The application of the isothermal microcalorimetry would be useful for the screening test of the drug compatibility with excipients.     

Characterization of fibril reinforced membranes for fuel cells

Characteristics of fibril reinforced membranes developed by Asahi Glass Company are reviewed. PTFE-fibrils <1 μm in diameter are dispersed in ion-exchange membranes uniformly. Mechanical properties, such as tensile strength, tear strength, creep property and compressive property were examined and compared with non-reinforced membranes. Fibril reinforced membranes, even by the addition of a small amount of PTFE-fibrils (2.7 wt.%), show excellent mechanical strength, especially in creep and tear strength. Cell performance is nearly equal to the one using a non-reinforced membrane and cell voltage stays about the same during the cell operation at 80 °C for 3000 h.     

Regioselective synthesis and biological activity of oxidized chitosan derivatives

Oxidized chitosan derivatives with various degrees of oxidation (DS, 0.1–1.0) were prepared by the treatment of chitosan with CrO₃/aq HClO₄ or by the oxidation of ­3‐O‐ and N‐protected chitosan with 30% aq H₂O₂/Na₂WO₄ followed by 3‐O‐ and N‐deprotection. The oxidized products were then N‐acetylated with Ac₂O in order to improve their water‐solubility. Although the oxidized chitosan derivative of DS 0.28 and the degree of N‐acetylation of chitosan (DA) 38% was insoluble in the pH 3–8 region, that of DS 0.26 and DA 76% was soluble in the neutral pH range. The newly‐prepared acetylated and oxidized chitosan derivatives were found to suppress the chemiluminescence response of inflammatory cells such as canine polymorphonuclear cells (PMNs). Analysis by the surface plasmon resonance method revealed that the bind and release behavior of PMNs to acetylated oxidized chitosan derivatives was similar to that against carboxymethylated chitosan derivatives. The amount of water‐soluble chitosan derivative bound to cytokine IL‐8 was found to be affected by the structural and electronic features of the chitosan substituents in the chitosan chain. Copyright © 2003 John Wiley & Sons, Ltd.     

Coordination reaction of cobaloxime with 4-vinylpyridine-styrene copolymer

The equilibrium constants of the coordination reaction of chlorodimethylformamide·cobaloxime with 4-vinylpyridine–styrene copolymers (PPS) were determined. The constants for PPS, which contain 20–50% 4-vinylpyridine (4VP) unit, measured about 1.3 × 10⁵ liter/mole larger than those in the pyridine system (6.8 × 10⁴ liter/mole). When the polymer ligand is 4VP homopolymer or contains less than 20% 4VP unit, K values are lower. The rate constants (k_f) of the coordination reactions of the cobaloxime with polymer ligands were also measured in dimethylformamide (DMF) and benzene. In DMF k_f decreased with an increase in 4VP unit content of the polymer ligand; in benzene it was increased by the 4VP fraction. These results can be explained by the variation in conformation of the polymer chain in each solvent. The effect of the polymer chain on complexation was discussed on the basis of the kinetic data.