Complete suppression of metastable phase and significant enhancement of magnetic properties of B-rich PrFeB nanocomposites prepared by devitrifying amorphous ribbons

The effect of refractory element addition on phase transformation, crystallization behavior and magnetic properties of Pr_8.5Fe_81.5B₁₀ (addition-free) and Pr_8.5Fe_81.5M₂B₁₀ (M=V, Cr, Nb, Zr, Ti) ribbons has been investigated. The annealed addition-free ribbon as well as the samples with V or Cr additions are mainly composed of the metastable Pr₂Fe₂₃B₃ phase, whereas annealed ribbons with Nb, Zr or Ti additions primarily consist of Pr₂Fe₁₄B and a minor amount of Fe₃B/boride. The complete suppression of the metastable Pr₂Fe₂₃B₃ phase due to Nb, Zr or Ti additions leads to a significant enhancement of the magnetic properties. For example, the remanence, the coercivity and the energy product are remarkably increased from 2.5 kG, 0.4 kOe and 0.2 MG Oe for the addition-free material to 9.2 kG, 4.7 kOe and 7.6 MG Oe for the specimens with Nb addition. The successful elimination of the metastable Pr₂Fe₂₃B₃ phase is believed to profit from two factors: (a) Nb, Zr or Ti atoms substitute the Pr site, comparatively increase the Pr content, and thus inhibit the nucleation of Pr-lean Pr₂Fe₂₃B₃ phases, and (b) the formation of Nb, Zr, or Ti borides consumes some part of B, which hinders the generation of the B-rich Pr₂Fe₂₃B₃ phase.     

Synchronized cluster formation in coupled laser networks

We experimentally investigate the phase dynamics of laser networks with homogenous time-delayed mutual coupling and establish the fundamental rules that govern their state of synchronization. We identified a specific substructure that imposes its synchronization state on the entire network and show that for any coupling configuration the network forms at most two synchronized clusters. Our results indicate that the synchronization state of the network is a nonlocal phenomenon and cannot be deduced by decomposing the network into smaller substructures, each with its individual synchronization state.     

Rotational brownian motion and fluorescence intensify fluctuations

A theory, which connects rotational brownian motion with intensity fluctuations of the light emitted from fluorescent molecules excited by linearly polarized light, is given. Analysis of rotational diffusion in this way does not depend on the close relationship between fluorescence lifetime and rotational relaxation times, which is necessary in present methods and thus makes an enlarged time range available for fluorescence spectroscopy.When short fluorescence lifetimes are used the rotational diffusion of the molecule in its ground state will be observed.     

Die Schichtenbildung,zumal von Boden- und Tontrübungen,ihre Erklärung und ihre Heranziehung zur landwirtschaftlichen Bodenuntersuchung

Ohne Zusammenfassung     

Gate‐Induced Modification of Water Adsorption on Dielectrics Probed by EFM and Carbon Nanotube FETs

Humidity plays an important role in molecular electronics. It facilitates charge movement on top of dielectric layers and modifies the device transfer characteristics. Using two different methods to probe temporal charge redistribution on the surface of dielectrics, we were able to extract the surface humidity for the first time. The first method is based on the relaxation time constants of the current through carbon nanotube field‐effect transistors (CNTFETs), and the second is based on electric force microscopy (EFM) measurements. Moreover, we found that applying external gate biases modifies the surface humidity. A theoretical model based on dielectrophoretic attraction between the water molecules and the substrate is introduced to explain this observation, and the results support our hypothesis. Furthermore, it is found that upon the adsorption of two to three layers of water the surface conductivity saturates.     

Doping‐Induced Absorption Bands in P3HT: Polarons and Bipolarons

In this work, we focus on the formation of different kinds of charge carriers such as polarons and bipolarons upon p‐type doping (oxidation) of the organic semiconductor poly(3‐ hexylthiophene‐2,5‐diyl) (P3HT). We elucidate the cyclic voltammogram during oxidation of this polymer and present spectroscopic changes upon doping in the UV/Vis/near‐IR range as well as in the mid‐IR range. In the low‐oxidation regime, two absorption bands related to sub‐gap transitions appear, one in the UV/Vis range and another one in the mid‐IR range. The UV/Vis absorption gradually decreases upon further doping while the mid‐IR absorption shifts to lower energy. Additionally, electron paramagnetic resonance (EPR) measurements are performed, showing an increase of the EPR signal up to a certain doping level, which significantly decreases upon further doping. Furthermore, the absorption spectra in the UV/Vis range are analyzed in relation to the morphology (crystalline vs. amorphous) by using theoretical models. Finally, the calculated charge carriers from cyclic voltammogram are linked together with optical transitions as well as with the EPR signals upon p‐type doping. We stress that our results indicate the formation of polarons at low doping levels and the existence of bipolarons at high doping levels. The presented spectroscopic data are an experimental evidence of the formation of bipolarons in P3HT.     

FLUORESCENCE SPECTRAL CHANGES OF HEMATOPORPHYRIN DERIVATIVE UPON BINDING TO LIPID VESICLES, Staphylococcus aureus AND Escherichia coli CELLS

Abstract— The binding of hematoporphyrin derivated (Hpd) to lipid vesicles and bacterial membranes was determined by fluorescence spectroscopy. The fluorescence measurements of Hpd in aqueous solutions showed two bands at 613 and 677 nm. In lipid environments of lecithin vesicles the fluorescence spectrum was shifted to 631 and 692 nm, respectively. Hpd was rapidly bound to the cell membrane of Staphylococcus aureus while much less binding occurred in the presence of Escherichia coli. At the same time, spheroplasts of both bacteria were shown to bind Hpd to a similar extent. These results are well correlated with the photoinactivation of the gram positive bacteria with Hpd while the gram negative cells were shown to be resistant. The pH dependence of both Hpd binding to S. aureus as well as the photodynamic inhibitory effect of the same bacteria are similar. It is concluded that the segregation of Hpd to the cell membrane is a prerequisite for its photodynamic effect.     

Ca3N2 and Mg3N2: unpredicted high-pressure behavior of binary nitrides

High-pressure synthesis allows both fundamental and materials science research to gain unprecedented insight into the inner nature of materials properties at extreme environment conditions. Here, we report on the high-pressure synthesis and characterization of γ-Ca(3)N(2) and the high-pressure behavior of Mg(3)N(2). Investigation of M(3)N(2) (M = Ca, Mg) at high-pressure has been quite challenging due to the high reactivity of these compounds. Ex situ experiments have been performed using a multianvil press at pressures from 8 to 18 GPa (1000-1200 °C). Additional in situ experiments from 0 to 6 GPa (at RT) at the multianvil press MAX 80 (HASYLAB, Beamline F.2.1, Hamburg) have been carried out. The new cubic high-pressure phase γ-Ca(3)N(2) with anti-Th(3)P(4) defect structure exhibits a significant increase in coordination numbers compared to α-Ca(3)N(2). Contrary, Mg(3)N(2) shows decomposition starting at surprisingly low pressures, thereby acting as a precursor for Mg nanoparticle formation with bcc structure. Soft X-ray spectroscopy in conjunction with first principles DFT calculations have been used to explore the electronic structure and show that γ-Ca(3)N(2) is a semiconductor with inherent nitrogen vacancies.     

Disordered carbon nanofibers/LiCoPO<Subscript>4</Subscript> composites as cathode materials for lithium ion batteries

LiCoPO₄-coated disordered carbon nanofibers (CNFs/LiCoPO₄) were obtained by a sol–gel method, using triethyl phosphite or triethyl phosphate as the phosphorous source. The crystal structure of the products was analyzed by X-ray powder diffraction, while morphology was studied using scanning electron microscopy, transmission electron microscopy, Auger electron spectroscopy and X-ray photoelectron spectroscopy. Optimal synthesis conditions for the CNFs/LiCoPO₄ in light of the best electrochemical performance are discussed. The best discharge capacity 105 mAh/g (or ca. 63% of the theoretical capacity) shows the material with 40% CNFs/LiCoPO₄ and addition coating by carbon black. This composition has a best purity of active materials and point coverage of CNFs. The X-ray photoelectron C1s spectra of the CNFs surface without and with sputter erosion show enhancement of C–O bonds at the fiber surface, which does not influence significantly electrochemical behavior of the composite materials.