Influence of production progress on the heavy metal content in flax fibers

The aim of this work was to determine the content of selected heavy metals in flax materials depending on the stage of fiber manufacturing. Non-treated natural fiber composition was compared with that of fibers processed. Changes in the composition of yarn before and after the following scutching, hackling, washing, and bleaching were also investigated. Analysis of heavy metals was performed applying inductively coupled plasma mass spectrometry. Flax material was mineralized in closed Teflon vials with a mixture of concentrated nitric acid which were then placed in a microwave oven system. Analytical quality of the obtained results was checked by the determination of elements in the Certificate Reference Materials of IAEA-V-10. The acquired results proved that the content of metals in flax clearly varies depending on the treatment process applied (bleaching, washing, coloration). Significant differences were also connected with the dye used. Presented at the 35th International Conference of the Slovak Society of Chemical Engineering, Tatranské Matliare, 26–30 May 2008.     

Double proton transfer and charge transfer transitions in hydrogen-bonded systems: formic acid dimer

The barriers for double proton transfer in the ground and lowest Π-Π^* and Π-Π^* excited states of the formic acid dimer have been calculated within a modified INDO scheme. Analysis of the nature of the excited electronic states, with emphasis on charge-transfer transitions, has been performed. The results indicate a lower barrier in the excited Π-Π^* states than in the ground state.     

Electronic spectra in shpolskii-type hydrocarbon matrices,fluorescence properties and electronic structure of sym-tribenzotridehydro [12] annulene

Highly resolved spectra of S₁ ? S₀ and S₂ ← S₀ electronic transitions of sym-tribenzotridehydro [12] annulene (TBA) in polycrystalline methylcyclohexane matrices are obtained at 77 K. By comparison with the reinvestigated IR and Raman spectra of TBA several e' and a'₁ modes are identified in the fluorescence spectrum. The lifetime and quantum yield of TBA fluorescence are equal to 38 ns and 0.15, respectively, at room temperature. The calculations of the electronic structure of TBA within the PPP CI approximation are performed.     

Synthesis of meso-TPP Revisited: Its “Green-Oriented” Optimization Under Controlled Microwave Heating

A practical and proecological improvement for synthesis of meso-tetraphenylporphyrin (meso-TPP) under microwave irradiation is described. A cyclocondensation reaction of benzaldehyde and pyrrole followed by oxidation of the porphyrinogen formed as an intermediate in a small amount of propionic acid at 120 °C (under controlled microwave heating) resulted in conversion to meso-TPP in a reasonable yield (ca. 30%) in preparative-scale experiments (300–500 mg). The influence of many parameters such as the concentration of reagents, catalyst, solvent, temperature, reaction time, and oxidant on the reaction yield was studied. The environmental motive in this improvement is reduction of solvent volume (ca. 250 times). Also, some toxic reagents were eliminated from the procedure.      

Use of Propionibacterium freudenreichii T82 Strain for Effective Biosynthesis of Propionic Acid and Trehalose in a Medium with Apple Pomace Extract and Potato Wastewater

Propionic acid bacteria are the source of many metabolites, e.g., propionic acid and trehalose. Compared to microbiological synthesis, the production of these metabolites by petrochemical means or enzymatic conversion is more profitable. The components of microbiological media account for a large part of the costs associated with propionic fermentation, due to the high nutritional requirements of Propionibacterium. This problem can be overcome by formulating a medium based on the by-products of technological processes, which can act as nutritional sources and at the same time replace expensive laboratory preparations (e.g., peptone and yeast extract). The metabolic activity of P. freudenreichii was investigated in two different breeding environments: in a medium containing peptone, yeast extract, and biotin, and in a waste-based medium consisting of only apple pomace and potato wastewater. The highest production of propionic acid amounting to 14.54 g/L was obtained in the medium containing apple pomace and pure laboratory supplements with a yield of 0.44 g/g. Importantly, the acid production parameters in the waste medium reached almost the same level (12.71 g/L, 0.42 g/g) as the medium containing pure supplements. Acetic acid synthesis was more efficient in the waste medium; it was also characterized by a higher level of accumulated trehalose (59.8 mg/g d.s.). Thus, the obtained results show that P. freudenreichii bacteria exhibited relatively high metabolic activity in an environment with apple pomace used as a carbon source and potato wastewater used as a nitrogen source. This method of propioniate production could be cheaper and more sustainable than the chemical manner.     

Characterization of the surface topography and nano-hardness of Cu/Ni multilayer structures

This article describes the results of a study of Cu/Ni multilayer coatings applied on a monocrystalline Si(100) silicon substrate by the deposition magnetron sputtering technique. Composed of 100 bilayers each, the multilayers were differentiated by the Ni sublayer thickness (1.2 to 3 nm), while maintaining the constant Cu sublayer thickness (2 nm). The multilayer coatings were characterized by assessing their surface topography using atomic force microscopy and their mechanical properties with nano-hardness measurements by the Berkovich method. The tests showed that the hardness of multilayers was substantially influenced by the thickness ratio of Cu and Ni sublayers and by surface roughness. The highest hardness and, at the same time, the lowest roughness was exhibited by a multilayer structure with a Cu-to-Ni sublayer thickness ratio of 2:1.5.     

Biologically Active Preparations from the Leaves of Wild Plant Species of the Genus Rubus

The plants of the genus Rubus (R.) are applied as antiseptic agents in the treatment of skin diseases. Despite the great interest in plants of this genus, there are few reports on the antioxidant and biological activities of preparations obtained from the leaves of these plants. Therefore, we decided to evaluate the antioxidant activity of preparations from leaves of wild plant species of the genus Rubus using the frequently applied DPPH, ABTS, and FRAP methods, as well as to determine the total polyphenol content using the Folin–Ciocalteau method and perform qualitative evaluation by gas chromatography–mass spectrometry (GC-MS). The bactericidal and fungicidal activities of the obtained preparations were evaluated by applying laboratory tests: using the disc and the well methods based on the standards EN 13697:2019, EN 13697:2015, and EN 1500:2013. Microbiological tests of the plant preparations against bacteria, fungi, and yeasts isolated from the environment and against reference strains were performed. Moreover, antimicrobial testing of antibiotics against the tested strains was performed for comparison. The n-octanol/water partition coefficient of the obtained preparations was determined by the shake-flask method to determine their lipophilicity. According to the results, a high content of polyphenols and other antioxidant and biologically active compounds can be thought of as the parameter responsible for the effective activity of plant preparations obtained from wild plant species of the genus Rubus. The methods for determining bactericidal and fungicidal activity clearly demonstrates that preparations with reduced ethanol content exhibit bactericidal and fungicidal activity on surfaces. Testing of hand disinfection by means of rubbing with the preparations confirmed their antimicrobial activity against Escherichia coli K12 NCTC 10538. The obtained results show that the tested preparations exhibit on average two times lower activity against the reference bacterial strains than comparable antibiotics. The preparations obtained from the leaves of R. idaeus L. and R. fruticosus L. could complement classical antibiotics. While environmental bacteria showed a similar response to the preparations and antibiotics, their sensitivity was about one-third less than that of the reference strains. Our studies have shown that the obtained preparations are highly hydrophilic (logP < 0). Thus, these preparations can only be used in lipid bilayers in the aqueous core of liposomes, not in the lipid envelope.