Extraction of Am(III) in the presence of lanthanides and yttrium by benzyldimethyldodecylammonium nitrate from acidic nitrate solutions

We have investigated the effect of coextraction of lanthanides and yttrium on the distribution coefficients D_Am in the extraction of americium by benzyldimethyldodecylammonium nitrate (BDMLNNO₃) from nitrate solutions. In the coextraction of lanthanides, the extraction of Am(NO₃)₃ is suppressed, which is markedly manifested in the extraction of light lanthanides (La, Ce, Pr); of the series of lanthanides their extraction is the highest. The effect of nitric acid and the possibility of separation of lanthanides and americium by the application of three-stage multiple extraction is discussed.     

Electrosorption of hydrogen into palladium-gold alloys

Hydrogen electrosorption into Pd-Au alloys has been studied in acidic solutions (1 M H₂SO₄) using cyclic voltammetry. Pd-Au electrodes with limited volume were prepared by electrochemical co-deposition. It was found that the maximum H/(Pd+Au) ratios decrease monotonically with increasing gold content and reach zero at ca. 70 at% Au. Similarly to the case of Pd limited volume electrodes, two peaks in the hydrogen region, corresponding to two types of sorbed hydrogen, are observed on voltammograms for Pd-rich alloys. The hydrogen capacity, H/(Pd+Au), measured electrochemically, depends on the sweep rate in the cyclic voltammetry experiments, which suggests that two different mechanisms for hydrogen desorption from the Pd-Au alloy are possible. After a strong decrease of Pd concentration at the electrode surface, caused by long cyclic polarization to sufficiently anodic potentials, the amount of absorbed hydrogen is still significant for alloys initially rich in Pd. The results obtained from CO adsorption experiments suggest that only Pd atoms are active in the hydrogen absorption/desorption process. Electronic Publication     

Liquid chromatography of carbon clusters

Summary A comparison of three binary mobile phases in LC separation of C₆₀ and C₇₀ fullerences on chemically bonded 2,4-dinitroanilinopropyl (DNAP) stationary phase was carried out, n-Hexane-benzene has been found to be the best mobile phase for efficient separation of the all-carbon molecules permitting high loads in preparative LC.     

Application of kinetic investigations for interpretation ofn-hexane and benzene adsorption on active carbon

Differencies between the mechanism ofn-hexane and benzene adsorption on active carbon were investigated on the ground of kinetic measurements. As it has been stated, the kinetic measurements show fundamental differencies between the mechanism of adsorption in spite of analogy existing in the state of adsorption equilibrium. Within the range investigated, only the adsorption ofn-hexane follows the model of volume filling of micropores. Existence of those differencies is also confirmed by measurements of effective diffusion coefficient values as well as changes of activation energy of the diffusion—adsorption process.

---

Anwendung kinetischer Untersuchungen zur Interpretation des Adsorptionsverhaltens vonn-Hexan und Benzol an Aktivkohle

Zusammenfassung Mittels kinetischer Messungen untersuchte man die Unterschiede im Mechanismus des Adsorptionsverlaufes vonn-Hexan und Benzol an Aktivkohle. Man stellte fest, daß trotz der Analogie im Adsorptionsgleichgewichtszustand die kinetischen Messungen auf prinzipielle Unterschiede im Adsorptionsmechanismus hinweisen. Im untersuchten Bereich verläuft nur die Adsorption vonn-Hexane nach dem Modell der Mikroporenvolumenausfüllung. Die auftretenden Unterschiede wurden auch durch die Berechnungen der Werte der effektiven Diffusionskoeffizienten sowie Änderungen der Aktivierungsenergie des Diffusions-Adsorptionsprozesses bestätigt.

     

Determination of total carbon and total organic carbon from volatile air pollutants

Summary The method developed based on the determination of TC and TOC in the form of the total amount of CO₂ requires application of the proper techniques for the final determination of CO₂. The possibility of using a stream of carrier gas at a convenient flow-rate for desorbing quantitatively CO₂ concentrated on a molecular sieve permits use of a wide variety of known analytical techniques for the final determination of CO₂. Various methods were compared on the basis of both absolute and calibration measurements. The absolute methods chosen were gravimetric (classical or an automated version based on application of a gravimetric automat and automatic recording balance), thermogravimetric analysis and coulometry. The calibration methods included thermal conductivity, the flame-ionization detector (after conversion of CO₂ into methane) and infrared absorption. Usefulness of the methods was evaluated on the basis of comparative statistical analysis of experimental data with respect to precision (Snedecor'sF-test and Bartlett'sU ²-test) and accuracy (Student'st-test).

---

Zusammenfassung Das entwickelte Verfahren zur Bestimmung des TC- und TOC-Gehaltes in Form der gesamten Menge CO₂ erfordert die Anwendung geeigneter Analysentechniken zur Endbestimmung dieser Verbindung. Die Möglichkeit einer Desorption des am Molekularsieb angereicherten CO₂ in einem Gasstrom mit geeignetem Durchfluß erlaubt zur Endbestimmung von CO₂ die Anwendung einer Reihe verschiedener Analysenverfahren. Die Anwendbarkeit verschiedener, auf Absolutverfahren und auch auf relativen Messungen beruhender Methoden wurde vergleichend untersucht. Die folgenden Methoden zur CO₂-Bestimmung wurden gewählt: die Gravimetrie (klassische oder automatisierte unter Einsatz eines Wägeautomaten und einer registrierenden Waage), die Thermogravimetrie und die Coulometrie. Von den relativen Methoden wurden die Thermokonduktometrie, der Flammenionisationsdetektor (nach Umsetzung von CO₂ zu Methan) und das IR-Absorptionsmeßverfahren geprüft. Die Anwendbarkeit der Methoden wurde mit Hilfe statistischer Prüfverfahren beurteilt, wobei die Präzision (SnedecorsF-Test und BartlettsU ²-Test) und die Genauigkeit (Studentst-Test) der erhaltenen Analysenwerte verglichen wurden.

     

Working conditions of a Clark-type sensor with a polyethylene membrane in the presence of vapours of chlorine derivatives of methane

The indications of a Clark-type electrochemical sensor with a polyethylene foil used as a membrane are noticeably changed if vapours of chlorine derivatives of methane (CCl₄, CHCl₃, CH₂Cl₂) are present in the atmosphere examined and the sensor has been calibrated in an atmosphere from which those vapours were absent. The sensitivity of the sensor increases and tends to deviate from linearity. The increase is more profound, when the number of chlorine atoms within a molecule of the vapour increases, the partial pressure of the vapour increases and the temperature of the atmosphere examined decreases. If the vapours affect the membrane for a long time, the response time decreases. If the membrane is freshly subjected to the influence of the vapours, a longer period of time is needed to reach a stable indication corresponding to the partial pressure of oxygen actually observed.     

Influence of Al2O3 Nanoparticles on the Thermal Stability of Ultra-Fine Grained Copper Prepared by High Pressure Torsion

Summary.  Ultra-fine grained (UFG) Cu (grain size 80 nm) containing 0.5 wt.% Al₂O₃ nanoparticles (size 20 nm) was prepared by high pressure torsion (HPT). Positron lifetime spectroscopy was employed to characterize the microstructure of this material, especially with respect to types and concentration of lattice defects. The evolution of microstructure with increasing temperature was studied by positron lifetime spectroscopy and X-ray diffraction measurements. The thermal stability of the Cu + 0.5 wt.% Al₂O₃ nanocomposite was compared with that of pure UFG Cu prepared by the same technique. The processes taking place during thermal recovery of the initial nanoscale structure in both studied materials are described. Received October 5, 2001. Accepted (revised) December 20, 2001     

Prediction of Retention in Liquid-Solid Chromatography with Ternary Mobile Phases

The method for the prediction of capacity factors in ternary mobile phases is presented. The adsorption mechanism of retention is considered. The simple theoretical equations are proposed for mobile phases for which the ratio of mole fractions of the weaker solvents remains fixed. The relations between parameters characterizing retention in ternary and binary mobile phases are discussed. The theoretical model is verified for numerous solutes and different mobile phases.     

Dehydrogenation of ethylbenzene with nitrous oxide in the presence of mesoporous silica materials modified with transition metal oxides

The novel mesoporous templated silicas (MCM-48, SBA-15, MCF, and MSU) were used as supports for transition metal (Cu, Cr, or Fe) oxides. The catalysts were synthesized using the incipient wetness impregnation, and characterized by low-temperature N2 sorption, DRIFT, photoacoustic IR spectroscopy, UV-vis diffuse reflectance spectroscopy, and temperature-programmed desorption of ammonia. It was shown that the preparation method used results in different distributions and dimensions of the transition metal oxide clusters on the inert support surface. The prepared catalysts were tested in the reaction of oxidative dehydrogenation of ethylbenzene in the presence of nitrous oxide. The iron-containing catalysts showed the highest catalytic activity. The presence of isolated Fe3+ was found to be the most important factor influencing the ethylbenzene conversion. The undesirable effect of the increase in selectivity toward CO2 was observed for the samples with the highest concentrations of acidic surface sites.