A set of four soil reference materials with certified values of total element contents and their extractable fractions

A set of certified reference materials of four natural soils denoted as CRM 7001-4 was prepared. They consist of light sandy soils with normal and elevated, silty clay loam with normal, and loam with elevated element levels. Certified and/or information values were established for the total contents of the elements As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mn, Ni, Pb, V, Zn, and their fractions, extractable with aqua regia, and boiling and cold 2 mol L^–1 nitric acid, from results of a 28 laboratory intercomparison using various methods of atomic absorption spectrometry, optical emission spectrometry, mass spectrometry, electrochemical methods, spectrophotometry, instrumental neutron activation analysis, and X-ray fluorescence.     

Spectrochemical Properties of Noncubical Transition Metal Complexes in Solution. XII. Angular Overlap Studies of Salicylideneethylenediamine Cu(II) Complex in Various Solvents

As a part of our general interest in the UV-Vis spectroscopy of multidentate mixed-donor ligands, the (salicylideneethylenediamine)Cu(II) complex has been prepared and characterized by elemental analyses, solubility in common solvents, molar conductivities, and ultraviolet (UV), and visible (Vis) spectroscopy. The combined results of spectrophotometric measurements and EPR spectra, as well as known the X-ray structure for solids, were used to determine the structure of the investigated complex in solutions. The spectra of [Cu(salen)] (H₂salen = salicylideneethylenediamine), were measured in various solvents at room temperature, resolved by Gaussian analysis, and angular overlap model (AOM) treated in C _2v symmetry. Because of overparametrization problems, the bis(salicylaldehyde)Cu(II) complex has been characterized and AOM treated. The results of this have been used for AOM studies of [Cu(salen)]. The effect of the solvents upon the - and -bonding ligand abilities is discussed.     

Mechanistic Study on the Oxidation of Promazine and Chlorpromazine by Hexaimidazolcobalt(III) in Acidic Aqueous Media

The kinetics of the oxidation of promazine and chlorpromazine by hexaimidazolcobalt(III) were studied in the presence of a large excess of cobalt(III) and H⁺ ions using u.v.–vis. spectroscopy ([Co^III] = (1–6) × 10⁻³ m, [ptz] = (2.5–10) × 10⁻⁵ m, [H⁺] = 0.05–0.8 m, I = 1.0 m (H⁺, Na⁺, Cl⁻), T = 333–353 K, l = 1 cm). In each case, the reversible reaction leads to formation of cobalt(II) species and a stable cationic radical. A linear dependence of the pseudo-first-order rate constant (k_obs) on [Co^III] with a non-zero intercept was established for both phenothiazine derivatives. A marked difference in the observed reaction rate for promazine and chlorpromazine is associated with the difference in its ability to undergo oxidation and is consistent with a trend in the redox potential changes for these reductants. The activation parameters for reactions studied were determined. Mechanistic consequences of all the results are discussed.     

Simple Method for Simultaneous Determination of Selenium and Arsenic in Human Hair by Means of Atomic Fluorescence Spectrometry with Hydride Generation Technique

This study describes a simple, rapid and reliable method for simultaneous determination of selenium and arsenic in human hair by means of atomic fluorescence spectrometry combined with a hydride generation technique (HG-AFS). The procedure developed encompasses microwave digestion of a sample in the nitric acid environment only. The interferences caused by nitrous oxides are eliminated by removing a gas from above the digested solution with a stream of argon. The sample is then chemically treated in a flow-through hydride generation system and exposed to measurements in a double-channel atomic fluorescence spectrometer. The method permits determining both analytes in the linear range of 0.5–100µgL^–1 with a detection limit equal to 0.2µgL^–1, as well as with very good repeatability not exceeding 1% for Se and 2% for As. No mutual interferences from either of the analytes in the concentrations ranges matching the hair composition were found. The method was verified in terms of accuracy with the use of a reference material and then applied to the analysis of the natural samples of human hair.     

Mutual Solubilities of Water and Alkanes

Summary.  The evaluation of mutual solubility data for systems water with n-alkanes, isoalkanes, and cycloalkanes along the three phase line is reported and a formula for the prediction of solubility of alkanes in water is developed. Then a cubic equation of state with an added term, which accounts for hydrogen bonding is used for correlation of liquid–liquid equilibrium data and for prediction of solubility of water in hydrocarbons using alkane in water solubility data. Comparison of the predicted and experimental solubilities is performed using all accessible experimental data. With this approach it is possible to predict the solubilities of water in alkanes with good accuracy over the temperature range up to about 20 K below critical temperature. Solubility of alkanes in water can also be calculated using experimental data for solubility of water in alkanes but results of these calculations are more sensitive to experimental errors of the data. Corresponding author: E-mail: macz@ichf.edu.pl Received August 5, 2002; accepted (revised) September 13, 2002 Published online March 13, 2003 RID="a" ID="a" Dedicated to Prof. Dr. H. Gamsj?ger on the occasion of his 70^th birthday anniversary     

Thermal decomposition of metal polyacrylates

Results of thermal and pyrolysis-GC/MS analyses of Na, Ca and Mg polyacrylates are presented. It was confirmed that the main decomposition reactions of the Na salt take place in the temperature range 420 – 470 and those of the other two polymers in the range 450–490. It was found that the solid residue after decomposition was the metal carbonate or oxide, while the volatile products consisted of H₂, CO, CO₂, saturated and unsaturated hydrocarbons (including cycloolefins and aromatic hydrocarbons) and aliphatic ketones. This suggests that the thermal decomposition of the metal polyacrylates proceeds via side-chain splitting and breaking of the main chain of the polymer, without retropolymerization.

---

Zusammenfassung Die Ergebnisse der Thermo- und Pyrolyse-GC/MS-analysen von Na-, Ca- und Mg-Polyacrylaten werden beschrieben. Es wurde bestÄtigt, dass die Hauptzersetzungsreaktionen des Natriumsalzes im Temperaturbereich von 420 bis 470, jene der anderen zwei Polymeren im Bereich von 450 bis 490 ablaufen. Es wurde nach der Zersetzung ein fester Rückstand von Metallkarbonat oder -oxid gefunden, wÄhrend die flüchtigen Produkte aus N₂, CO, CO₂, gesÄttigten und ungesÄttigten Kohlenwasserstoffen (darunter Zykloolefinen und aromatischen Kohlenwasserstoffen) und aliphatischen Ketonen bestanden. Dies lÄsst darauf schliessen, dass sich die thermische Zersetzung der Metallpolyacrylate über die Abspaltung der Seitenkette und der Spaltung der Hauptkette des Polymers ohne Retropolymerisation vollzieht.

---

Résumé On présente les résultats des analyses thermiques et des produits de décomposition pyrolytique par chromatographie en phase gazeuse et spectrométrie de masse (GC/MS) des polyacrylates de Na, Ca et Mg. On confirme que la réaction de décomposition principale du sel de sodium a lieu entre 420 et 470 et celle des deux autres polymères entre 450 et 490. On trouve que le résidu solide après décomposition est le carbonate ou l'oxyde du métal, tandis que les produits volatils consistent en N₂, CO, CO₂, en hydrocarbures saturés et non-saturés (y compris les cyclooléfines et hydrocarbures aromatiques) et en cétones aliphatiques. Cela permet de supposer que la décomposition thermique des polyacrylates métalliques s'effectue par coupure de la chaÎne latérale et par rupture de la chaÎne principale du polymère, sans rétropolymérisation.

---

-- -- Na, Ca Mg. , 420–470, — 450–490. , . H₂, CO, CO₂, , , . , .

     

Calorimetric and thermal decomposition kinetic study of Tb(Tyr)(Gly)<Subscript>3</Subscript>Cl<Subscript>3</Subscript>·3H<Subscript>2</Subscript>O

The solid-state ternary complex of terbium chloride with L-tyrosine and glycine, [Tb(Tyr)(Gly)₃Cl₃·3H₂O], was synthesized and characterized. Using a solution-reaction isoperibol calorimeter, the enthalpy of reaction for the following reaction, TbCl₃·6H₂O(s)+Tyr(s)+3Gly(s)=Tb(Tyr)(Gly)₃Cl₃·3H₂O(s)+3H₂O(l), was determined to be (5.1±0.6) kJ mol^-1. The standard enthalpy of formation of Tb(Tyr)(Gly)₃Cl₃-3H₂O at T=298.15 K has been derived as -(4267.3±2.3) kJ mol^-1. The thermal decomposition kinetics of the complex was studied by non-isothermal thermogravimetry in the temperature range of 325-675 K. Two main mass loss stages existed in the process of the decomposition of the complex, the kinetic parameters for the second stage were analyzed by means of differential and integral methods, respectively. Comparing the results of differential and integral methods, mechanism functions of the thermal decomposition reaction for its second stage were proposed. The kinetic equation can be expressed as: d/dt=Aexp(-E/RT)(1-)². The average values of the apparent activation energy E and pre-exponential factor A were 213.18 kJ mol^-1 and 2.51·10²⁰ s^-1, respectively.     

Analysis of R. P. Smith's and D. C. Parris-R. B. Mclellan's carbon diffusivity data

A phenomenological model is proposed to account for the variation of carbon diffusivityD(N₁) with composition in austenite. This model is based on Parris-McLellan's statement that the increase ofD(N₁) with carbon concentrationN ₁ is due to the increase in chemical driving force. The gradient of the carbon activity in Wagner's and in Zupp-Stevenson's interpretation is presumed to be the intrinsic driving force. The predictions of the model are compared with carbonD(N₁) values both with [1] and without [5] a chemical concentration gradient. TheD(0) values and the carbon-carbon interaction coefficients ₁ are calculated by the use of the least squares method from the experimental data. The application of Zupp-Stevenson's definition of the activity coefficient ₁ results in a better fit of the theory to the experimental data.     

Magnon spectrum and curie temperature of doped ferromagnetic semiconductors

The influence of a partially filled conduction band on the magnetic properties of ferromagnetic semiconductors is studied within the framework of thes-f model. Allowing for magnon scattering to arbitrary order in the form of virtual electron- holecreation the magnon spectral density is derived, from which one gets magnon energies which are substantially renormalized by the presence of conduction electrons. In particular it is shown how the quasiparticle structure of the electronic excitation energies [4, 5] leads to scattering corrections in the magnon spectrum. These corrections are always negative and reduce the positive mean field part, which is proportional to the electron densityn. The calculated magnon spectrum is then used to determine the strikingn-dependence of the Curie-temperatureT _c of Gd-doped EuO and EuS.     

Interdiffusion in the Co-Ni system-I concentration penetration curves and interdiffusion coefficients

The interdiffusion in the Co-Ni system has been investigated in the temperature range of 950 to 1150 °C, by means of diffusion specimens of pure Co and Ni. The concentration curvesN(x, t) obtained with the aid of an JXA-3 A JEOL electron microprobe were evaluated using the smoothing cubic spline method by means of the Boltzmann-Matano equation. The obtained interdififusion coefficient values ¯D increase with the increasing Ni concentration and satisfy the Arrhenius equation at temperaturesH 990 °C. At lower temperatures the influence of high diffusivity paths may be effective, resulting in higher ¯D values. No expressive influence of atomic (Ni₃Co) or magnetic order on the interdiffusion has been detected. The activation enthalpyH values were found almost concentration independent. A Kirkendall effect study has been carried out with positive results which are presented in Part II of this paper. A new method for the determination of diffusants concentration in the Kirkendall plane was proposed. With the use of this method and of Darken equations the intrinsic diffusion coefficients were calculated. These results are given in Part III.