AN INEXPENSIVE STIRRING DEVICE FOR THE 'MERRY-GO-ROUND' PHOTOREACTOR FOR THE DETERMINATION OF REACTION QUANTUM YIELDS

A simple bar magnet is employed to effect stirring of the contents of reaction cells in a'merry-go-round'photoreactor.     

Fast-response system for signal acquisition and processing in electrothermal atomic absorption spectrometry

An electrothermal atomic absorption (a.a.) spectrometer is modified to allow accurate correlation of absorbance and pyrometrically measured temperature with time. To by-pass the slow electronics of the spectrometer, the signal is fed from the preamplifier immediately after the photomultipier tube to a 12-bit A/D converter mounted in a 320K IBM-PC microcomputer. The wall temperature of the graphite furnace, measured with an automatic optical pyrometer, is recorded simultaneously with absorbance by feeding the pyrometer output to a second channel of the A/D board. Fast deuterium-arac background correction is also done. Background-corrected absorbance, background absorbance and temperature are recorded at 60 Hz. A simple algorithm allowed experimental activation energies to be calculated automatically. All programming was in BASIC or PASCAL.     

Photoionization of Naphthalene and Anthracene in Acetonitrile

Naphthalene and anthracene undergo a monophotonic ionization process in MeCN to produce the radical cations in low quantum yields (around 0.06 for anthracene). This reaction originates from the relaxed singlet excited state S₁, and it is not due to traces of H₂O in the solvent.     

Complex forming and extraction properties of oligo benzo-fused crown ethers

The complex forming properties with alkali metal and ammonium ions of a series of oligo benzo-condensed 18-crown-6 ethers1–8 having a different gradation of lipophilicity and of molecular rigidity are investigated by voltammetry at the interface of two immiscible electrolyte solutions (ITIES) and by a liquid-liquid extraction technique. The experimental results obtained in the two phase system H₂O/nitrobenzene are discussed in relation to the structure of the crown and the cation type. The stability constants for the 1 : 1 complexes of Na⁺, K⁺, Rb⁺, Cs⁺ and NH ₄ ⁺ in nitrobenzene have been determined and compared with the extraction constants for the 1: 1 complexes of Na⁺ and K⁺ and for the 1 : 1 and 1 : 2 complexes of Cs⁺, showing the effect of oligo benzo condensation for the 18-crown-6 system.     

Influence of response factors on determining equilibrium association constants of non-covalent complexes by electrospray ionization mass spectrometry

A method for determining the equilibrium association constant of a complexation reaction A + B left harpoon over right harpoon AB by electrospray ionization mass spectrometry is described. The method consists in measuring the relative intensities of the peaks corresponding to A and to AB in equimolar A-B solutions at different concentrations C(0). The results are fitted by a non-linear least-squares procedure, with the two variable parameters being the equilibrium association constant K(a) and a factor R, defined by I(AB)/I(A) = R x [AB]/[A]. The factor R is the ratio between the response factors of AB and A, and corrects for the relative electrospray responses of the complex and the free substrate A, mass discrimination of instrumental origin and/or moderate in-source dissociation. The method is illustrated with the following two systems: complexes between a double-stranded 12-base pair oligonucleotide and minor groove binders, and cyclodextrin complexes with alpha,omega-dicarboxylic acids. For the oligonucleotide complexes, it is found that the response of the complex is not dramatically different to the response of the free oligonucleotide duplex, as the double helix conformation is disturbed by the drug only to a minor extent. In the case of cyclodextrin complexes, these complexes were found to have a much higher response than free cyclodextrin. This may be due to the fact that cyclodextrin is neutral in solution, whereas the complex is charged, but it can also stem from the fact that a significant proportion of the complex is in a non-inclusion geometry. The present method requires the exact determination of the concentrations of the reactants and is applicable to 1 : 1 complexes.     

Solution and X-Ray Crystal Structures of the Di- and Tetra-allyl Ether of tert- utylcalix[4]arene

The di- and tetra-allyl ethers of tert-butylcalix[4]arene 1 and 2 have been prepared by alkylation of tert-butylcalix[4]arene with allyl bromide and K₂CO₃ using different reaction times. Solution ¹H NMR measurement of the di-allyl ether 1 and X-ray crystal structures of the complexes of 1 with chloroform (1a) or methanol (1b) indicate the cone conformation of 1 in which intramolecular hydrogen bonding can be maximized. The crystalline state conformers 1a and 1b are distorted in different grades depending on the solvent. While methanol is incorporated in the macrocycle, chloroform molecules do not occupy the cage. The solution ¹H NMR spectra of tetra-allyl ether 2 show the co-existence of the cone and partial cone conformation. The partial cone conformer of 2 was investigated by X-ray crystallography. In this compound hydrogen bonding is not existent. The conformer distribution is likely affected by steric and template effects.     

Determination of manganese in brain samples by slurry sampling graphite furnace atomic absorption spectrometry

A simple procedure for the determination of manganese in different sections of human brain samples by graphite furnace atomic absorption spectrometry has been developed. Brain sections included cerebellum, hypothalamus, frontal cortex, vermix and encephalic trunk. Two sample preparation procedures were evaluated, namely, slurry sampling and microwave-assisted acid digestion. Brain slurries (2% w/v) could be prepared in distilled, de-ionized water, with good stability for up to 30 min. Brain samples were also digested in a domestic microwave oven using 5 ml of concentrated HNO₃. A mixed palladium+magnesium nitrate chemical modifier was used for thermal stabilization of the analyte in the electrothermal atomizer up to pyrolysis temperatures of 1300 °C, irrespective of the matrix. Quantitation of manganese was conducted in both cases by means of aqueous standards calibration. The detection limits were 0.3 and 0.4 ng ml⁻¹ for the slurry and the digested samples, respectively. The accuracy of the procedure was checked by comparing the results obtained in the analysis of slurries and digested brain samples, and by analysis of the NIST Bovine Liver standard reference material (SRM 1577a). The ease of slurry preparation, together with the conventional set of analytical and instrumental conditions selected for the determination of manganese make such methodology suitable for routine clinical applications.     

C(methyl)–H ⋅ ⋅ ⋅ π(aryl) Interaction Stabilizing Molecular Conformation. X-Ray Crystal Structure of an Inclusion Compound of a Nonprotic Host with Nitromethane Guest

In the cocrystal formation of a nonprotic polar (host) molecule (1) with nitromethane (guest) several weak, but directional, intermolecular interactions have vital importance. The endo conformation of the (N)-xylene group of the polycyclic succinimide-based host 1 is stabilized by a C_methyl $---$ H ??? π interaction [C ??? π /H ??? π distances are 3.554(7)/2.57 Å, the C $---$ H ??? π angle is 159^○], and the crystal packing is governed by dipole–dipole type interhost (C $ =$ )O ??? C( $ =$ O) connection [C ??? O $ =$ 3.000(5) Å and <C $ =$ O ??? C $ =$ 159.8(3)^○] in conjunction with possible C $---$ H ??? O interactions [with C ??? O distances ranging between 3.20 and 3.50 Å] involving the polar groups of both host and guest. Crystal data: 1 ??? nitromethane (1:1), C₂₆H₂₁O₂ N ? CH₃NO₂, M _w = 440.50, P2 ₁/n, a = 14.143(1), b = 7.973(1), c = 20.291(2) Å, β = 95.183(9)^○, Z = 4, D _c = 1.2840(2) g cm^?3, R = 0.055 for 1709 reflections.     

Anthracene Based Bulky Diol Hosts. Crystal Structures of a Free Host and of Inclusion Compounds with Dipolar Guests

X-ray crystal structures are reported of a free host compound 1, comprising two diphenylmethanol terminal groups attached to a central 9,10-ethynyl substituted anthracene unit, and of three inclusion compounds of a fluoren-9-ol substituted analogous host 2 with acetone, dimethyl sulphoxide (DMSO) and dimethylformamide (DMF) as guest, respectively. Despite the presence of two hydroxyl groups in 1, there is no O–H...O hydrogen bond between the molecules in the guest free crystal – only weaker C–H...O interactions and van der Waals' type connections. In the inclusion compounds of 2, H-bonded 1:2 host–guest associates are formed, where each of the host hydroxyl groups binds to a guest oxygen atom. The orientations of the host–guest connections in these complexes vary, being E for acetone and Z for both DMSO and DMF guests, relative to the host anthracene unit. The DMSO and DMF inclusion compounds of 2 proved to be isostructural.     

Gas‐phase functionalized carbon‐carbon coupling reactions catalyzed by Ni (II) complexes

Gas‐phase C―C coupling reactions mediated by Ni (II) complexes were studied using a linear quadrupole ion trap mass spectrometer. Ternary nickel cationic carboxylate complexes, [(phen)Ni (OOCR¹)]⁺ (where phen = 1,10‐phenanthroline), were formed by electrospray ionization. Upon collision‐induced dissociation (CID), they extrude CO₂ forming the organometallic cation [(phen)Ni(R¹)]⁺, which undergoes gas‐phase ion‐molecule reactions (IMR) with acetate esters CH₃COOR² to yield the acetate complex [(phen)Ni (OOCCH₃)]⁺ and a C―C coupling product R¹‐R². These Ni(II)/phenanthroline‐mediated coupling reactions can be performed with a variety of carbon substituents R¹ and R² (sp³, sp², or aromatic), some of them functionalized. Reaction rates do not seem to be strongly dependent on the nature of the substituents, as sp³‐sp³ or sp²‐sp² coupling reactions proceed rapidly. Experimental results are supported by density functional theory calculations, which provide insights into the energetics associated with the C―C bond coupling step.