Effects of metal and “magnetic wall” on the dispersion characteristic of magnetostatic waves

The dispersion relation of magnetostatic waves tangentially magnetized to saturation ferrite film, with a “magnetic wall” condition (tangential component of microwave magnetic field is equal to zero) on one of the film surface and with a metal condition on the opposite surface is analyzed. The dispersion characteristics show that unidirectional magnetostatic waves appear in this structure: they can transfer energy in one direction only and fundamentally cannot transfer energy in the opposite direction. The dispersion-free propagation of magnetostatic waves also is possible in the structure in a wide frequency interval.     

Electrical detection of nuclear spin echoes

We show, via a straightforward calculation, that it is feasible to detect nuclear spin echoes in a ferromagnetic thin film by electrical means. The detection scheme is based on the deflection of the electronic magnetization when the nuclear magnetization reforms during an echo. This deflection is observed as a time-dependent magnetoresistive signal.     

Polymer-precursor-derived (am-) SiC/TiC composites for resistive heaters in large volume multi-anvil high pressure/high-temperature apparatus

(Amorphous-)SiC/TiC composites for resistive tubular heaters in HP/HT experiments were obtained via a polymer-precursor process. A slurry consisting of a commercial SiC-precursor polymer (allylhydridopolycarbosilane, AHPCS) and TiC powder as conductive filler was applied to the inner walls of zirconia insulation tubes, using a centrifugation-casting method. Resistive coatings with homogeneous thickness of ～200 μm were obtained. The heaters were tested in octahedral multi-anvil assemblies at ～10 GPa with simultaneous recording of heating voltage and current. Up to a maximum temperature of ～1800°C they showed temperature vs. power characteristics reproducible from batch to batch, with resistance decreasing from 0.08 to 0.02 Ω during heating. Microstructural characterization using SEM/EDX was carried out on the recovered SiC/TiC composite material, as well as on pristine resistive heaters directly after coating and curing to 230°C, and after additional pyrolysis at 900°C in argon. In all cases, a stable composite microstructure of an interpenetrating network of TiC particles with either silicon carbide polymer precursor or an amorphous SiC phase were found. The composites were characterized by XRD and thermogravimetry. Further improvement of coating procedure and materials combination (precursor/filler/insulator substrate) may result in advanced coatings, operational well beyond 2000°C.     

Intraoperative contrast-enhanced MR-imaging as predictor of tissue damage during cryoablation of porcine liver

This study evaluate intraoperative Magnetic Resonance Imaging (MRI) as predictor of tissue damage following cryoablation of porcine liver with and without concomitant hepatic vascular inflow occlusion.Inflow occlusion was used during freezing in 6 of 12 pigs included. The volumes of the procedural ice-balls were estimated from MR images. Immediately after thawing contrast (MnDPDP) enhanced MRI was performed to estimate the volume of the cryolesion. Four days after ablation MRI was repeated of the in-vivo and the ex-vivo liver. Photography was performed of the sliced liver specimens to estimate the volumes of the lesions. The intraoperative volume of the cryolesion as shown by contrast enhanced MRI corresponded well to the ice-ball volume for lesions made without vascular occlusion (difference 0.3 +/- 0.9 cm(3), p = 0.239). For lesions made during occlusion the volume of the intraoperative cryolesion was larger than the corresponding ice-ball (difference 7.5 +/- 3.3 cm(3), p = 0.003). The volume of the cryolesions as estimated from histopathology four days after freezing and contrast enhanced MRI immediately after freezing corresponded well for lesions made with (difference -2.6 +/- 4.5 cm(3), p = 0.110) and without vascular occlusion (difference -0.5 +/- 2.3 cm(3), p = 0.695).Intraoperative MnDPDP-enhanced MRI of the cryolesion is predictive of the tissue damage induced during cryoablation of porcine liver. The procedural ice-ball is not, if induced during inflow occlusion.     

Logging damage and injured tree mortality in tropical forest management

Using insights from the forest ecology literature, we analyze the effect of injured trees on stand composition and carbon stored in above‐ground biomass and the implications for forest management decisions. Results from a Faustmann model with data for a tropical forest on Kalimantan show that up to 50% of the basal area of the stand before harvest can consist of injured trees. Considering injured trees leads to an increase in the amount of carbon in above‐ground biomass of up to 165%. These effects are larger under reduced impact logging than under conventional logging. The effects on land expectation value and cutting cycle are relatively small. The results suggest that considering injured trees in models for tropical forest management is important for the correct assessment of the potential of financial programs to store carbon and conserve forest ecosystem services in managed tropical forests, such as reducing emissions from deforestation and forest degradation and payment for ecosystem services. Recommendations for Resource Managers

• Considering the role of injured trees is important for managing tropical forests
• These trees can cover up to 50% of basal area and contain more than 50% of the carbon stored in above‐ground biomass
• Reduced impact logging leads to a larger basal area of injured trees and more carbon stored in injured trees than conventional logging
• Injured trees play an important role when assessing the potential for carbon storage in the context of payment for forest ecosystem services.

     

Control of Nonlinearly Coupled Oscillators Using a Method of Averaging

Container cranes belong to the class of underactuated systems for which the design of control laws is a challenging task. We study the stabilization of certain modes of a crane system using a method of averaging. Based on the local approximation to the system dynamics by a second order Taylor series expansion, the effects of nonlinear couplings are exploited to steer degrees of freedom, for which no linear actuation is available. Rotations of the load about the vertical axis are analyzed and a control method is derived and tested experimentally. (© 2015 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Towards helical coordination polymers: Molecular wires in chiral coats

The use of functionalised 2,2':6',2″-terpyridines and multi-domain ligands based upon this metal-binding motif for the assembly of co-ordination oligomers is discussed. The extension of the methodology to the preparation of helical polymers is demonstrated.     

Bimanes (1,5-diazabicyclo[3.3.0]octadienediones): Laser activity in syn-bimanes

The conversion of 3-methyl-4-benzyl-4-chloro-2-pyrazolin-5-one 10b was catalyzed by a mixture of potassium fluoride and alumina to give syn-(methyl, benzyl)bimane 6 (62%) without detectable formation of the anti isomer, A6 [a 1 : 1 mixture (87%) of the isomers 6 and A6 was obtained when the catalyst was potassium carbonate]. In a similar reaction syn-(methyl,carboethoxymethyl)bimane 7 (15%) with the anti isomer A7 (36%) was obtained from 3-methyl-4-carboethoxymethyl-4-chloro-2-pyrazolin-5-one 10c . syn-(Methyl, β-acetoxyethyl)bimane 8 (70%) was obtained from 3-methyl-4-β-acetoxyethyl-4-chloro-2-pyrazolin-5-one 10d (potassium carbonate catalysis) and was converted by hydrolysis to syn-(methyl, β-hydroxyethyl)bimane 9 (40%). Acetyl nitrate (nitric acid in acetic anhydride) converted anti-(amino,hydrogen)bimane 11 to anti-(amino,nitro)bimane 15 (91%), anti-(methyl,hydrogen)bimane 13 to anti-(methyl,nitro)(methyl,hydrogen)bimane 16 (57%), and degraded syn-(methyl,hydrogen)bimane 12 to an intractable mixture. Treatment with trimethyl phosphite converted syn-(bromomethyl,methyl)bimane 17 to syn-(dimethoxyphosphinylmethyl,methyl)bimane 18 (78%) that was further converted to syn-(styryl,methyl)bimane 19 (29%) in a condensation reaction with benzaldehyde. Treatment with acryloyl chloride converted syn-(hydroxymethyl,methyl)bimane 20 to its acrylate ester 21 (22%). Stoichiometric bromination of syn-(methyl,methyl)bimane 1 gave a monobromo derivative that was converted in situ by treatment with potassium acetate to syn-(acetoxymethyl,methyl)(methyl,methyl)bimane 47 . N-Amino-μ-amino-syn-(methylene,methyl)bimane 24 (68%) was obtained from a reaction between the dibromide 17 and hydrazine. Derivatives of the hydrazine 24 included a perchlorate salt and a hydrazone 25 derived from acetone. Dehydrogenation of syn-(tetramethylene)bimane 26 by treatment with dichlorodicyanobenzoquinone (DDQ) gave syn-(benzo,tetramethylene)bimane 27 (58%) and syn-(benzo)bimane 28 (29%). Bromination of the bimane 26 gave a dibromide 29 (92%) that was also converted by treatment with DDQ to syn-(benzo)bimane 28 . Treatment with palladium (10%) on charcoal dehydrogenated 5, 6, 10, 11-tetrahydro-7H,9H-benz [6, 7] indazol [1, 2a]benz[g]indazol-7,9-dione 35 to syn-(α-naphtho)bimane 36 (71%). The bimane 35 was prepared from 1,2,3,4-tetrahydro-1-oxo-2-naphthoate 37 by stepwise treatment with hydrazine to give 1,2,4,5-tetrahydro-3H-benz[g]indazol-3-one 38 , followed by chlorine to give 3a-chloro-2,3a,4,5-tetrahydro-3H-benz[g]indazol-3-one 39 , and base. Dehydrogenation over palladium converted the indazolone 34 to 1H-benz[g] indazol-3-ol 36 . Helicity for the hexacyclic syn-(α-naphtho)bimane 36 was confirmed by an analysis based on molecular modeling. The relative efficiencies (RE) for laser activity in the spectral region 500–530 nm were obtained for 37 syn-bimanes by reference to coumarin 30 (RE 100): RE > 80 for syn-bimanes 3, 5, 18 , and μ-(dicarbomethoxy)methylene-syn-(methylene,methyl)bimane 22 : RE 20–80: for syn-bimanes 1,2,4,20,24,26 , and μ-thia-syn-(methylene,methyl)bimane 50 : and RE 0-20 for 26 syn-bimanes. The bimane dyes tended to be more photostable and more water-soluble than coumarin 30. The diphosphonate 18 in dioxane showed laser activity at 438 nm and in water at 514 nm. Presumably helicity, that was demonstrated by molecular modeling, brought about a low fluorescence intensity for syn-(α-naphtho)bimane 36 , Φ0.1, considerably lower than obtained for syn-(benzo)bimane 28 , Φ0.9.     

New fluorine derivatives of methylcyclohexasilane

1,1-Difluorodecamethyl- and 1,1,4,4-tetrafluorooctamethylcyclohexasilane were synthesized by the reaction of LiF with the corresponding trifluoromethanesulfonic derivatives and were characterized by spectroscopic methods, mainly by modern NMR techniques. The stability of the fluorinated cyclosilanes decreases with an increase of fluorine substituents. This seems to be the reason for the instability of perfluorinated cyclosilanes.     

Adsorbate-site determination by surface-state spectroscopy?

Electronic surface states can interact with adsorbate orbitals only if they have the same symmetry with respect to the adsorption site. Therefore, the interaction between a surface state and a particular adsorbate orbital provides information about the symmetry properties of the adsorption site. This is discussed for the adsorption of hydrogen and ethylene on Ni(110).