Addition initiated ring closure substituted spiro[4,2]Hepta-1,3-dienes via fulvene intermediates

The reactivity of the epoxy-fulvene 1 with various nucleophiles has been examined. It is a versatile Intermediate for the preparation of spiro[4.2]hepta-1,3-diene synthons via nucleophilic addition to the C₆ position followed by intramolecular cyclization of the substituted cyclopentadiene anion generated in situ.     

THE 'OPSIN SHIFT' IN BACTERIORHODOPSIN: STUDIES WITH ARTIFICIAL BACTERIORHODOPSINS

Abstract— The difference (in cm⁻¹) in absorption maxima between the protonated Schiff base of retinals and the pigment derived therefrom has been defined as the opsin shift. It represents the influence of the opsin binding site on the chromophore. The analysis of the opsin shifts of a series of dihydrobacteriorhodopsins has led to the external point-charge model, which in addition to a counter anion near the Schiff base ammonium, carries another negative charge in the vicinity of the β-ionone ring. This is in striking contrast to the external point-charge model proposed earlier for the bovine visual pigment. The absorption maxima of rhodopsins formed from bromo- and phenyl retinals support the two models. A retinal carrying a photoaffinity label has yielded a nonbleachable bacteriorhodopsin.     

Synthesis gas as substrate for the biological production of fuels and chemicals

Synthesis gas provides a simple substrate for the production of fuels and chemicals. Synthesis gas can be produced via established technologies from a variety of feedstocks including coal, wood, and agricultural and municipal wastes. The gasification is thermally efficient and results in complete conversion of the feedstock to fermentable substrate.Clostridium ljungdahlii grows on the synthesis gas components, carbon monoxide, hydrogen, and carbon dioxide. Production of acetic acid and ethanol accompanies growth with synthesis gas as sole source of energy and carbon. Rate and yield parameters are compared forC. ljungdahlii grown on carbon monoxide, or hydrogen with carbon dioxide.

     

Effects of ammonium nitrate on sensitivity for determinations of copper,iron, and manganese in sea water by atomic absorption spectrometry with pyrolytically coated graphite tubes

Ammonium nitrate, used as a matrix modifier in sea-water analysis to eliminate the interference of sodium chloride, degrades the pyrolytic coating on graphite-furnace tubes. The initially increased sensitivities for copper, manganese and iron are maintained for up to 15 atomizations; there is then a rapid decline to a constant lower sensitivity. The characteristics depend strongly on the particular lot of furnace tubes. To decrease the NaCl interference without using matrix modifier, estuarine samples must be diluted (1 + 1) with pure water. Blanks and standards are prepared and diluted with Gulf Stream water containing low amounts of trace metals to match the estuarine matrix.     

Some aspects of the polymerization of N-vinylcarbazole by grignard reagents

The polymerization of N-vinylcarbazole (NVC) initiated by PhMgBr in benzene was studied at 32°C. R_p is second order with respect to PhMgBr concentration but increases with NVC concentration (up to 0.06 M) and falls thereafter. R_p and P _n are depressed by the addition of thiophene and water. Modifiers such as benzaldehyde, butanone, and ethylene glycol practically inhibit the polymerization. Carbon tetrachloride and carbon dioxide, when passed through the NVC solution first, enhance the R_p and P _n increases with increasing PhMgBr and NVC concentrations, respectively. R_p increases with temperature, but P _n shows a maxium at a certain temperature. A cationic mechanism has been proposed where the polymerization is initiated by RMg⁺ cations produced from the ionization of PhMgBr by the Ashby and Smith mechanism.     

Multi-purpose functionality for the structural elaboration of the piperazine-2,5-dione motif

Mild methods for controlled C- and N-alkylation of 3-benzyloxycarbonylpiperazine-2,5-diones are reported. The benzyloxylcarbonyl substituent can also serve as latent functionality for N-acyliminium ion formation and subsequent trapping enables installation of new carbon and/or heteroatom substituents.     

The effect of 2,2′-bipyridyl on the stability of Cu(II) complexes with carboxylic acids

The stability constants β₂, and β₂ of simple Cu(II) complexes with methoxyacetic, phenylacetic, and cyclohexylacetic acid were determined spectrophotometrically and compared with the stability of composite complexes containing 2,2′-bipyridyl as the first ligand and the above mentioned acid as the second ligand. In each case the stability of the composite complex Cu(bip)L⁺ was found to exceed that of the simple complex CuL⁺ and the differences in the values of log β are comprised within 0.15–0.17.     

Synthesis of the alkaloids julandine and ipalbidine-use of silicon (IV) chloride

Titanium (IV) chloride and silicon (IV) chloride with high oxygen affinity are the best Lewis acid catalysts, of a number tested, for cyclisation of an enamine-ketone (1) leading to the alkaloid, julandine (2); cyclisation of (6) in methanol solution without catalyst yields $\text{O}$-methylipalbidine (7) .     

Multiple rate-determining steps for nonideal and fractal kinetics

We show that the kinetic model of a single rate-determining step in a reaction mechanism can be extended to systems with multiple overall reactions for which the elementary reactions obey nonideal or fractal kinetics. The following assumptions are necessary: (1) The system studied is either closed or open, but no constraints exist preventing the evolution toward equilibrium. (2) Elementary reactions occur in pairs of forward and backward steps. (3) The kinetics of the elementary steps are either nonideal or fractal and are compatible with equilibrium thermodynamics. (4) The number of reaction routes is identical with the number of rate-determining steps. If these hypotheses are valid, then the overall reaction rates can be explicitly evaluated: they have a form similar to the kinetic equations for the elementary reactions and the apparent reaction orders and fractal coefficients can be expressed analytically in terms of the kinetic parameters of the elementary reactions. We derive a set of relationships which connect the equilibrium constants of the reaction routes, the corresponding overall rate coefficients, and the stoichiometric numbers of the rate-determining steps. We also derive a set of generalized Boreskov relations among the apparent activation energies of the forward and backward overall processes, the corresponding reaction enthalpies, and the stoichiometric coefficients of the rate-determining steps. If the elementary reactions obey fractal kinetics, the same is true for the rate-determining steps. The fractal exponents of the forward and backward overall reactions are linear combinations of the fractal exponents of the fractal elementary reactions. Similar to the theory of single rate-determining steps, our approach can be used for selecting suitable reaction mechanisms from experimental data.     

Synthesis and structures of beta-diketiminatotin(II) halides, an amide and of Sn(=E)[{N(R)C(Ph)}2CH](NR2) (E = S or Se, R = SiMe3)

Treatment of [Li(L1)]2 (1) or K(L2) (2) with SnX2 in Et2O yielded the heteroleptic beta-diketiminatotin(II) halides Sn(L1)Cl (3a), Sn(L1)Br (3b) or Sn(L2)Cl (4), even when an excess of the alkali metal beta-diketiminate was used [L1={N(R)C(Ph)}2CH, L2={N(R)C(Ph)CHC(But)N(R)}, R = SiMe3]. From and half an equivalent each of SnCl2.2H2O and SnCl2, or one equivalent of SnCl2.2H2O, the product was Sn(L3)Cl (5) or Sn(L4)Cl (6), in which one or both of the N-R bonds of L1 had been hydrolytically cleaved; the compound Sn(L5)Cl (7) was similarly obtained from and an equivalent portion of SnCl2.2H2O [L3={N(R)C(Ph)CHC(But)N(H)}, L4={N(H)C(Ph)CHC(But)N(H)} and L5={N(H)C(Ph)}2CH]. The halide exchange between 3a and 3b, studied by two-dimensional (119)Sn{1H}-NMR spectroscopy, is attributed to implicate a (mu-Cl)(mu-Br)-dimeric intermediate or transition state. The 13C{1H}-NMR spectra of or showed two distinct resonances for each group, which coalesced on heating, corresponding to DeltaG(338 K)= 69.4 (3a) or 72.8 (3b) kJ mol(-1). The chloride ligand of was readily displaced by treatment with NaNR2, CF3SO3H or CH2(COPh)2, yielding Sn(L1)X [X = NR2 (8), O3SCF3 (9) or {OC(Ph)}2CH (10)]. Oxidative addition of sulfur or selenium to gave the tin(IV) terminal chalcogenides Sn(E)(L1)(NR2)[E = S (11) or Se (12)]. The X-ray structures of the cocrystal of 3a/3b and of the crystalline compounds 5, 6, 8, 11 and are presented, as well as multinuclear NMR spectra of each of the new compounds.