Spin trapping chemistry of sodium 2-sulfonatophenyl t-butyl nitrone . a negatively charged water-soluble spin trap

A new water-soluble negatively charged spin trap, sodium 2-sulfonatophenyl $\text{t}$-butyl nitrone is described.     

Uses and analyses of curtin-hammett/winstein-holness systems involving second order reactions

The Curtin-Hammett (C-H) principle and the Winstein-Holness (W-H) equation approximate the product ratio and overall rate constant of reaction for systems involving a starting material which exists in two forms, each of which reacts via first-order kinetics to give a different product. The C-H/W-H approximations are valid when the rates of isomer interconversion are significantly faster than the rates of product formation. The present treatment encompasses non-first-order reactions to product. A numerical predictor-corrector technique is used to show (1) that relative reagent concentration can affect both the product ratio and the observed rates of product formation; (2) that the absolute concentration of reagent and substrate can affect the kinetics; and (3) that factors (1) and (2) above can affect the validity of the C-H/W-H approximations for non-first-order C-H/W-H schemes.     

Combinatorial enantiomeric separation of diverse compounds using capillary array electrophoresis

Combinatorial chiral separations were performed on a 96-capillary array electrophoresis system. A comprehensive enantioseparation protocol employing neutral and sulfated cyclodextrins as chiral selectors for common basic, neutral and acidic compounds was developed. By using only four judiciously chosen separation buffers, successful enantioseparations were achieved for 49 out of 54 test compounds spanning a large variety of pK and structures. Therefore, unknown compounds can be screened in this manner to identify the optimal enantioselective conditions in just one run.     

Thermodynamic equilibration of dihydropyridone enolates: application to the total synthesis of (+/−)-epiuleine

Following 1,4-reduction of 2-substituted dihydropyridones (1), the requisite ‘kinetic’ enolate can be isomerized upon warming to allow the isolation of the thermodynamic enolate as its vinyl triflate (3). This enolate interconversion is dependent on the dihydropyridone C-2 substituent and can be interpreted in terms of conformational analysis. This novel scaffold (3) opens another avenue for the strategic deployment of dihydropyridones into both natural product synthesis and drug discovery. To this end, this method is highlighted by its use as a key step in a total synthesis of (+/−) epiuleine (14).     

A Markov Sensitivity Model for Examining the Impact of Cost Allocations in Hospitals

The cost allocation process in hospitals typically entails an accounting step-down procedure whereby costs are allocated from non-revenue producing service centres to revenue centres. The resulting revenue centre costs are then compared with the third party (Blue Cross, Medicare, Medicaid) allowable costs. Any costs in excess of the allowable costs are not reimbursable. This procedure has been conceptualized using a Markov chain in a recent journal article. The purpose of this paper is to demonstrate how the Markov model may be used to assess the impact of various changes in the original data without having to recalculate the entire step-down process via a Markov model or any other procedure. The changes include an alternate step-down model, a different cost allocation basis for one or more service centres, and the expansion or contraction of one or more service centres.     

Hydroxamic acid polymers

A polymer bearing hydroxamic acid groups and having a high affinity for iron(III) was prepared through the following procedure. Acryloylalanine (III), prepared by the reaction of acryloyl chloride with alanine, was treated with N-hydroxysuccinimide in the presence of dicyclohexylcarbodiimide to give the N-hydroxysuccinimide ester (IV). The ester IV was polymerized by using AIBN in dioxane to give polymer V. Treatment of polymer V with methylhydroxylamine in DMF gave the hydroxamic acid polymer II. The water-soluble polymer II was purified by dialysis or by gel-permeation chromatography (GPC) on Sephadex G-25. Analytical GPC on Sephadex G-200 and Sepharose 4B indicate that the average molecular weight of the polymer is in the range of 5 × 10⁵ to 1 × 10⁶. The presence of hydroxamic acid groups is confirmed by the intense red-brown color produced by the addition of iron(III) to a 50% aqueous DMF solution of the polymer under acidic conditions. In pure water the polymer-iron complex precipitates as a tan solid. Iron-binding studies of the polymer reveal that the iron(III) trihydroxamic acid complex FeA₃ forms at low concentrations of iron. At higher iron levels a lower order of stability is apparent, which can be accounted for by the conversion of FeA₃ to FeA₂⁺. In contrast, the FeA₃ complex of the trihydroxamic acid deferoxamine-B is stable at all iron levels. These results are consistent with the polymer structure, which for steric reasons would favor a stable complex, FeA₂⁺, between iron and two adjacent hydroxamic acid groups. An FeA₃ complex would be expected to have a lower stability as a result of either bond angle strain and atomic compression, or a lower probability in bringing a third hydroxamic acid into position to form the octahedral complex.     

Synthesis and antimalarial effects of 5,6-dichloro-2-[(4-||4-(diethylamino)-i-methylbutyl] amino||-6-methyl-2-pyrirnidinyl)amino] benzimidazole and related benzimidazoles and lH-imidazo[4,5-b] pyridines

A group of fifty-five 2-[(4-11[(dialkylamino)alkyI]amino11-6-methyl-2-pyrimidinyl)amino]-benzimidazoles (VII) was synthesized in 3-88% yield by the condensation of the requisite 2-[(2-benzimidazolyl)amino]-4-chloro-6-methylpyrimidine (VI) with the appropriate polyamine in ethanol-hydrochloric acid or neat with excess amine containing potassium iodide. The 2-[(2-benzimidazolyl)amino]-6-methyl-4-pyrirnidinol precursors (V), obtained in 11-51% yield by cyclization of 2-(cyanoamino)-4-hydroxy-6-methylpyrimidine with a suitably substituted o-phenylenediamine, were chlorinated with phosphorus oxychloride to give the intermediate 2-[(2-benzimidazolyl)amino]-4-chloro-6-rnethylpyrimidines (VI) (27-99%). Oxidation of 5,6-dichloro-2-[(4-11[4-(diethylamino)-l-methylbutyl] amino 11-6-methyl-2-pyrimidinyl) amino ]benzimidazole ( 29 ) with m-chloroperbenzoic acid gave the distal N⁴'-oxide ( 31 ) (19%). Fusion of 2,3-uiaminopyridine with 2-(cyanoamino)-4-hydroxy-6-methylpyrimidine provided 2-[(4-hydroxy-6-tnethyl-2-pyrimidinyl)amino]-lH-imitlazo[4,5-b]pyrimidine (VIII) (30%), which upon chlori-nation with phosphorus oxychloride (63%) followed by amination with i N, N-diethylethylene-diamine afforded 2-(4-11[2-(diethylamino)ethyl] amino 11-6-methyl-2-pyrimidinyl)-lH-imidazo [4,5-b]pyridine (X) (8%). Thirty-eight of the novel 2-[(4-amino-6-methyl-2-pyrimidinyl)amino]-benzimidazoles possessed “curative” activity against Plasmodium berghei at single subcutaneous doses ranging from 20.640 mg./kg. Orally, thirty-one compounds exhibited suppressive activity against P. berghei comparable with or superior to the reference drugs 1-(p-chlorophenyl)-3-(4-11[2-(diethylarnino)ethyl]amino 11-6-methyl-2-pyrimidinyl)guanidine (I) and quinine hydrochloride, while twelve of them were 5 to 28 times as potent as I and quinine hydrochloride. Eight compounds also displayed strong suppressive activity against P. gallinaceum in chicks. 5,6-Dichloro-2-[(4-112-(diethylamino)ethyl]amino11-6-methyl-2-pyrimidinyl] benzimidazole (18) showed marked activity against a cycloguanil-resistant line of P. berghei, and the most promising member of the series, namely 5,6-dichloro-2-[(4-11[4-(diethylamino)-l-methylbutyl]amino11-6-methyl-2-pyrimidinyl)amino]benzimidazole ( 29 ) (Q = 28), was designated for preclinical toxico-logical studies and clinical trial. Structure-activity relationships are discussed.     

Rapid shear viscosity calculation by momentum impulse relaxation molecular dynamics

Recently, Arya et al. [J. Chem. Phys. 113, 2079 (2000)] introduced a new molecular dynamics method to rapidly compute the viscosity of fluids. The technique, termed momentum impulse relaxation (MIR), involves the imposition of a Gaussian velocity profile on an equilibrated system, after which the decay in the profile is monitored as a function of time. The shear viscosity is computed by matching the rate of decay of the velocity profile to the corresponding solution of the Navier-Stokes equation. The method was originally applied to simple systems (argon and n-butane) and found to give a comparable accuracy to conventional equilibrium and nonequilibrium methods with more than an order of magnitude reduction in computing time. In this work, we extend and generalize the method to examine larger molecules with higher viscosities than have been examined previously. A detailed analysis of the method is given, including the effect the velocity boundary conditions have on the viscosity, the sensitivity of the results to the velocity profile fitting procedure, the effect of preequilibration of the Gaussian profile, and the effect the system size and box shape have on the accuracy and speed of the method. It is shown that the MIR method can be extended to treat multiatom systems without loss of accuracy or computational efficiency.     

Magnetic circular dichroism studies XXXII

CNDO calculations of the MCD spectra of 7- and 9-methyladenine have been carried out in two approximations. A minor modification of the CNDO/S method of Jaffé and coworkers shows an improvement over Jaffé's parameterization with respect to band separations and the signs of the MCDB terms, but is not applicable ton→ π* transitions.