Modifying electronic communication in dimolybdenum units by linkage isomers of bridged oxamidate dianions

Reactions of Mo(2)(O(2)CCH(3))(DAniF)(3), DAniF = N,N'-di-p-anisylformamidinate, with oxamidate dianions [ArNC(O)C(O)NAr](2-), Ar = C(6)H(5) and p-anisyl, give pairs of isomeric compounds where the [Mo(2)] units are bridged by the oxamidate anions. For the alpha isomers, the C-C unit of the dianion is nearly perpendicular to the Mo-Mo bonds, and these are essentially perpendicular to each other. For the beta isomers, the corresponding C-C unit and the Mo-Mo bonds are essentially parallel to each other. Each type of isomer is stable in solution. The electronic communication as measured by the DeltaE(1/2) for the oxidation of each of the Mo(2) units is significantly better for the beta isomers. This is supported also by the appearance of what is conventionally called an intervalence charge-transfer band in the near infrared region upon oxidation of the beta isomers but not the alpha isomers. Molecular mechanics and DFT calculations help explain the relative conformations in the alpha isomers and the relative energy differences between the alpha and beta isomers.     

Application of a contactless conductometric detector for the simultaneous determination of small anions and cations by capillary electrophoresis with dual-opposite end injection

A contactless conductometric detection (CCD) system for capillary electrophoresis (CE) with a flexible detection cell was applied for the simultaneous determination of small anions and/or cations in rain, surface and drainage water samples. The applied frequency, the amplitude of the input signal, the electrolyte conductivity and electrode distance were found to be the most significant factors affecting the detection sensitivity. 2-(N-Morpholino)ethanesulfonic acid/histidine-based (MES/His) electrolytes were used for direct conductivity detection of anions and cations, while ammonium acetate was selected for indirect conductivity determination of alkylammonium salts. For the simultaneous separation procedure, involving dual-opposite end injection, an electrolyte consisting of 20 mM MES/His, 1.5 mM 18-crown-6 and 20 microM cetyltrimethylammonium bromide provided baseline separation of 13 anions and cations in less than 6 min. The detection limits achieved were 7-30 micrograms/l for direct conductometric detection of various common inorganic cations and anions, excluding F- (62 micrograms/l) and H2PO4- (250 micrograms/l), and 35-178 micrograms/l for indirect conductometric detection of alkyl ammonium cations. The developed electrophoretic method with conductometric detection was compared to ion chromatography.     

Holo- and hemidirected lead(II) in the polymeric [Pb(4)(mu-3,4-TDTA)2(H2O)2]*4H2O complex. N,N,N',N'-tetraacetate ligands derived from o-phenylenediamines as sequestering agents for lead(II)

The coordinating ability of the ligands 3,4-toluenediamine-N,N,N',N'-tetraacetate (3,4-TDTA), o-phenylenediamine-N,N,N',N'-tetraacetate (o-PhDTA), and 4-chloro-1,2-phenylenediamine-N,N,N',N'-tetraacetate (4-Cl-o-PhDTA) (H4L acids) toward lead(II) is studied by potentiometry (25 degrees C, I = 0.5 mol x dm(-3) in NaClO4), UV-vis spectrophotometry, and 207Pb NMR spectrometry. The stability constants of the complex species formed were determined. X-ray diffraction structural analysis of the complex [Pb4(mu-3,4-TDTA)4(H2O)2]*4H2O (1) revealed that 1 has a 2-D structure. The layers are built up by the polymerization of centrosymmetric [Pb4L2(H2O)2] tetranuclear units. The neutral layers have the aromatic rings of the ligands pointing to the periphery, whereas the metallic ions are located in the central part of the layers. In compound 1, two types of six-coordinate lead(II) environments are produced. The Pb(1) is coordinated to two nitrogen atoms and four carboxylate oxygens from the ligand, whereas Pb(2) has an O6 trigonally distorted octahedral surrounding. The lead(II) ion is surrounded by five carboxylate oxygens and a water molecule. The carboxylate oxygens belong to four different ligands that are also joined to four other Pb(1) ions. The selective uptake of lead(II) was analyzed by means of chemical speciation diagrams as well as the so-called conditional or effective formation constants K(Pb)eff. The results indicate that, in competition with other ligands that are strong complexing agents for lead(II), our ligands are better sequestering agents in acidic media.     

A highly reactive mononuclear Zn(II) complex for phosphodiester cleavage

The activity of a Zn(II) complex of a tetradentate, tripodal ligand for catalyzing phosphodiester cleavage is enhanced 750-fold by introducing three hydrogen bond donors to the ligand. Inhibition studies show that the Zn-aqua complex is the kinetically active form and that it binds the transition state with a formal dissociation constant of 3 x 108 M-1. The effect of these ligand modifications on the transition-state affinity is comparable to the rate acceleration provided by the metal ion itself. Overall, this mononuclear complex is more active than the most reactive dinuclear Zn(II) complexes reported to date.     

Ligand adsorption on an activated carbon for the removal of chromate ions from aqueous solutions

The results presented in this work are related to the design of a guideline to develop specific properties at the surface of an activated carbon (AC). For this, two model aromatic compounds have been synthesized and their electrolytic behavior in aqueous solutions was studied by a potentiometric method. The textural characteristics of the activated carbon were determined by porosimetry methods. The nature of oxygen-carrying functions and the acid-base behavior of the AC surface were characterized by TPD and potentiometric titration methods, respectively. The adsorption and desorption equilibria of the aromatic compounds on activated carbon were measured in aqueous solutions, and the hysteresis between adsorption and desorption, which reveals irreversible adsorption, was discussed on the basis of the frontier orbital theory. HOMO and LUMO orbitals of the adsorbent and adsorbates were calculated, and irreversible adsorption was attributed to the small energy difference between HOMO and LUMO of the aromatic adsorbates and the adsorbent. Adsorption equilibria of K2CrO4 in aqueous solution on the AC alone and on the AC-aromatic ligand adsorbents, respectively, prove the efficient development of specific chemical functions at the carbon surface provided by the adsorbed aromatic compounds.     

Occurrence and analysis of estrogens and progestogens in river sediments by liquid chromatography-electrospray-mass spectrometry

In this study, an analytical procedure for the determination in sediment of the most abundant and/or physiological active estrogens (estradiol, estriol, estrone, ethynyl estradiol, and diethylstilbestrol) and progestogens (progesterone, norethindrone. and levonorgestrel) is described. The procedure includes ultrasonic extraction of the lyophilized sediment, clean-up with octadecylsilica cartridges, and analysis by liquid chromatography-diode array detection-mass spectrometry (LC-DAD-MS). MS detection is performed with an electrospray interface in the positive ion mode for determination of the progestogens and in the negative ion mode for determination of the estrogens. The method was applied to the determination of the target compounds in river sediments from the area of Catalonia. Estrogens and progestogens were found at concentrations usually in the low ng g(-1) range. Estriol and norethindrone were the compounds most frequently found whereas maximum concentrations in all sediment samples were obtained for ethynyl estradiol (22.8 ng g(-1)) and estrone (11.9 ng g(-1)). Detection limits were in the range of 0.04-1.00 ng g(-1). Preliminary conjectures with regards to the environmental behavior and impact of estrogens and progestogens in rivers are made. To the authors' knowledge, this is the first work reporting a detailed method for the analysis of estrogens and progestogens in river sediments and data on the environmental occurrence of both groups of compounds.     

Comparative testing of the flammability of upholstery textiles

Flash ignition temperatures of upholstery textiles were measured with a modified derivatograph, and the TG, DTG, DTA and T curves were also recorded. The results obtained with the newly-developed system were compared with those of the ASTM D 1929 test procedure and with the simultaneously recorded thermal analysis curves.

---

Zusammenfassung Der Flammpunkt von Upholstery-Textilien wurde mittels eines modifizierten Derivatographen gemessen. TG-, DTG-, DTA- und T-Kurven wurden registriert. Die mit diesem neuentwickelten System erhaltenen Ergebnisse wurden mit den nach dem ASTM D 1929 Testverfahren erhaltenen und mit den simultan registrierten thermoanalytischen Kurven verglichen.

---

, -, -, - -. , ASTM 1929 .

---

---

Paper presented at the World Conference on Thermal Analysis, Madeira (Portugal), 1986.     

Testing the photocatalytic activity of cyanogen-and thiocyanogen-based inorganic polymers

The photocatalytic properties of some cyanogen-and thiocyanogen-based inorganic polymers, such as paracyanogens containing different metals (Hg, Ag, Cu), polythiocyanogens of different iodine contents, polycyanogen and poly (cyanogenthiocyanate), have been tested in two systems. Cu-containing paracyanogen and the iodine-poor polythiocyanogens catalyze the photoreduction of methylviologen under visible light, furthermore the Cu-containing paracyanogen catalyzes the photoreduction of water to hydrogen under UV irradiation.

---

, , , , (Hg, Ag, Cu), , (), . , , , , , , -.

     

Convergent stereocontrolled synthesis of substituted exo-glycals by Stille cross-coupling of halo-exo-glycals and stannanes

(Z)-exo-Glycals can be conveniently prepared in a convergent manner by Stille cross-coupling of (Z)-halo(Br,I)-exo-glycals and aryl or alkenyl stannanes, the latter are readily obtained by addition of tributylstannyl radicals to terminal alkynes.     

Two isomeric butadiene–N‐(acetoxy­phenyl)maleimide Diels–Alder adducts: supramolecular structure directed by C—H⋯X (X = O and π) hydrogen bonds and perpendicular dipole carbonyl–carbonyl inter­actions

The mol­ecular and supramolecular structures of 2‐(1,3‐dioxo‐2,3,3a,4,7,7a‐hexa­hydro‐1H‐isoindol‐2‐yl)phenyl acetate, C₁₆‐H₁₅NO₄, (I), and its para isomer, 4‐(1,3‐dioxo‐2,3,3a,4,7,7a‐hexa­hydro‐1H‐isoindol‐2‐yl)phenyl acetate, (II), are reported. The torsion angle between the succinimide and benzene rings depends on the position of the acet­oxy substitution [89.7 (1) and 61.9 (1)° for (I) and (II), respectively]. The twist of the acet­oxy group relative to the mean plane of the benzene ring is almost independent of the acet­oxy position [66.0 (1) and 70.0 (1)°]. Packing inter­actions for both compounds include soft C—H⋯X (X = O and Ph) inter­actions, forming chains of centrosymmetric dimers and inter­linked chains for (I) and (II), respectively. In addition, three perpendicular dipole C=O⋯C=O inter­actions contribute to the supramolecular structure of (II).