Flow‐Injection Pulsed‐Amperometric Determination of Free Glycerol in Biodiesel at a Gold Electrode

This work reports the highly‐sensitive amperometric determination of free glycerol in biodiesel at a gold electrode adapted in a flow‐injection analysis (FIA) cell. The amperometric method involved the continuous application of three sequential pulses to the working electrode (+250 mV, +700 mV, and ?200 mV, for 100 ms each). This sequence of potential pulses eliminated electrode passivation and dramatically increased the analytical signal. The proposed FIA‐amperometric method presented low relative standard deviation between injections (1.5 %, n=15), high analytical frequency (85 h^?1), satisfactory recovery values (93–118 %) for spiked samples, wide linear range (from 1 to 300 µmol L^?1), and low detection limit (0.5 µmol L^?1).     

On the use of a natural peat for the removal of Cr(VI) from aqueous solutions

A natural peat has been used as an adsorbent for the removal of hexavalent chromium from aqueous solution. The peat was firstly characterized in terms of particle size and chemical composition (ash content, pH of the point of zero charge, FT-IR and thermal analysis). Next, the kinetic and equilibrium aspects of the adsorption of Cr(VI) by this adsorbent were studied. The kinetic data were satisfactorily fitted to a kinetic law of partial order in C equal to one. The specific adsorption rates are around 10(-4)s(-1), increasing as temperature does. A noticeable influence of diffusion on the global adsorption process has been demonstrated. Finally, the equilibrium isotherms were satisfactorily fitted to a previously proposed model. The adsorption capacity of Cr(VI) was similar to some other previously reported and the affinity of Cr(VI) towards the active sites of the adsorbent increases as temperature rises.     

Scalable synthesis of highly reactive 1,3-diamino dienes from vinamidinium salts and their use in Diels-Alder reactions

A practical and chromatography-free synthesis of vinamidinium salts and their use as diene precursors in Diels-Alder reactions is reported. Additionally, 1,3-dipyrrolidino-1,3-butadiene was shown to be significantly more reactive than Rawal's diene in a competition experiment.     

Cu-SSZ-39, an active and hydrothermally stable catalyst for the selective catalytic reduction of NOx

A Cu-exchanged SSZ-39 zeolite has been synthesized and tested for the selective catalytic reduction (SCR) of NOx. This material shows an excellent catalytic activity, and most importantly, an extraordinary hydrothermal stability.     

Applied biological and physicochemical activity of isoquinoline alkaloids: oxoisoaporphine and boldine

The aim of this study was to determine the electronic influence of substituent groups and annelated rings such as oxazole-oxazinone on the physicochemical and photoprotection, antioxidant capacity, toxicity and singlet oxygen photosensitization biological properties of isoquinoline alkaloid frameworks. Thus, oxoisoaporphine derivatives 1-5 and 3-azaoxoisoaporphine (6), some of them with phenolic structures, did not present any antioxidant capacity, possibly either by formation of keto-enol tautomerism species or the formation of unstable free radicals. Due to the singlet oxygen quantum yields (F_D) near to unity, and greater photostability than phenalenone, oxoisoaporphines 4-6 may be considered as photosensitizers for singlet oxygen production and can be used as new universal study tools. The biological application as antibacterial agents is an important and possible tool in the study of compounds with low cytotoxicity and high reactivity in antineoplastic chemotherapy. On the other hand, when boldine and its annelated derivatives B1-4 are irradiated, a photoprotector effect is observed (SPF = 2.35), even after 30 minutes of irradiation. They also act as photoprotectors in cell fibroblast cultures. No hemolysis was detected for boldine hydrochloride and its salts without irradiation. In solutions irradiated before incubation (at concentrations over 200 ppm) photoproducts were toxic to the nauplii of Artemia salina.     

Scanning electron microscopy and roughness study of dental composite degradation

Our aim was to test the hypothesis that the use of mouthwashes, consumption of soft drinks, as well as the type of light curing unit (LCU), would change the surface roughness (Ra) and morphology of a nanofilled composite resin (Z350? 3M ESPE). Samples (80) were divided into eight groups: Halogen LCU, group 1, saliva (control); group 2, Pepsi Twist?; group 3, Listerine?; group 4, Colgate Plax?; LED LCU, group 5, saliva; group 6, Pepsi Twist?; group 7, Listerine?; group 8, Colgate Plax?. Ra values were measured at baseline, and after 7 and 14 days. One specimen of each group was prepared for scanning electron microscopy analysis after 14 days. The data were subjected to multifactor analysis of variance at a 95% confidence followed by Tukey's honestly significant difference post-hoc test. All the treatments resulted in morphological changes in composite resin surface, and the most significant change was in Pepsi Twist? groups. The samples of G6 had the greatest increase in Ra. The immersion of nanofilled resin in mouthwashes with alcohol and soft drink increases the surface roughness. Polymerization by halogen LCU (reduced light intensity) associated with alcohol contained mouthwash resulted in significant roughness on the composite.     

Highly stereoselective synthesis of imino-C-di- and trisaccharides as hydrolytically stable glycomimetics

A new straightforward route to glycomimetics containing a piperidine unit is reported. The key step of the methodology is the intramolecular 1,3-dipolar cycloaddition of easily accessible glycosyl alkenyl nitrones. The reaction takes place in most cases with a complete selectivity in favor of the exo–exo adduct, which facilitates the synthesis of all-cis piperidines bearing the glycosyl units. The direct transformation of adducts into the final imino-C-di and trisaccharide analogues is achieved in one step using simple reagents. Inhibition properties against two glycosidases have been tested but no positive results have been found.     

Synthesis,Crystal, and Electronic Structure of the New Ternary Zintl Phase Eu2–xMg2–yGe3 (x = 0.1; y = 0.5)

The new ternary phase Eu_2–xMg_2–yGe₃ (x = 0.1, y = 0.5) was obtained by solid‐state synthesis and the structure determined by means of Single Crystal X‐ray Diffraction. The compound crystallizes with the orthorhombic space group Cmcm (no. 63) having structural features of the low‐temperature modification of LaSi. The crystal structure contains two different types of germanium anions: isolated Ge^4– and $\rm^{2}_{\infty}$ [Ge^2–x–y] chains. The cation substructure is partially disordered and is best represented assuming a split position. The chemical bonding is well represented by the Zintl‐Klemm concept. Resistivity measurements reveal that the compound is metallic. DFT band structure calculations were carried out on the ideal stoichiometric compound Eu₂Mg₂Ge₃, showing that this model (x = 0; y = 0) would be also metallic as a consequence of the ecliptic stacking of anions. Susceptibility and specific heat measurements evidence the presence of weak, and probably frustrated, antiferromagnetic interactions between disordered europium atoms.     

New chiral zinc complexes: synthesis, structure, and induction of axial chirality

We describe an efficient methodology for the preparation of new chiral zinc complexes by assembling dynamically racemic biphenol derivatives and chiral 1,2-diamines with suitable zinc(II) precursors. Mononuclear and dinuclear zinc(II) complexes were formed from differently substituted biphenols. The solid-state and solution structural characterization of the resulting compounds allowed us to demonstrate a preferential sense of induced axial chirality for mononuclear complexes, a phenomenon that was not observed for the dinuclear ones.