Long term stability of organic selenium species in aqueous solutions

Long term stability of organic selenium compounds (selenocystine, selenomethionine, trimethylselenonium ion) has been studied over a one year period for 2 analyte concentrations: 25 and 150 μg/L Se, at pH 4.5 in the dark, under different storage conditions: temperature of –20°C, 4°C, 20°C, 40°C; in Pyrex, Teflon, or polyethylene containers; in an aqueous matrix or in the presence of a chromatographic counter ion (pentyl sulfonate at 10^–4 mol/L concentration). Light effects have also been tested. The stability of the selenium species was monitored by HPLC-ICP/MS. Storage conditions can drastically alter the stability of organic selenium species. Organoselenium compounds were shown to be stable in the dark over a one year period in an aqueous matrix at pH 4.5 in Pyrex containers at both 4°C and 20°C. Pyrex vials exposed to natural sunlight at room temperature resulted in a steady decrease of the selenoamino acid concentration. Teflon containers caused losses of less than 25% at both 4° C and 20° C in the dark. However, polyethylene vials presented, at all temperatures tested, a rapid decrease of the TMSe⁺ concentration. The stability of the Se species studied did not show significant differences between 4° C and 20° C in any container material used. Storage of solutions at 40° C led to slight differences between the Pyrex and Teflon containers. However, polyethylene presented a drastic decrease of the three species over time at this higher temperature. Solutions frozen at –20° C in polyethylene vials did not stabilize the TMSe⁺ signal. Finally, concentrations and matrices of the samples did not significantly affect the stability of the species. Received: 15 July 1996 / Revised: 14 July 1997 / Accepted: 18 July 1997     

Total synthesis of methyl l-daunosaminide hydrochloride via chiral 1,3-oxazine

Total synthesis of methyl l-daunosaminide hydrochloride was achieved from readily available l-tyrosine. Key steps in this strategy were palladium(0) catalyzed stereoselective intramolecular oxazine formation and catalytic hydrogenation of oxazine intermediate. This paper reported ¹H and ¹³C NMR data of α- and β-anomer of methyl l-daunosaminide hydrochloride.     

Synthesis of Chiral Exocyclic Amines by Asymmetric Hydrogenation of Aromatic Quinolin‐3‐amines

Asymmetric hydrogenation of aromatic quinolin‐3‐amines was successfully developed with up to 94 % enantiomeric excess (ee). Introduction of the phthaloyl moiety to the amino group is crucial to eliminate the inhibition effect caused by the substrate and product, to activate the aromatic ring, and to improve the diastereoselectivity. This new methodology provides direct and facile access to chiral exocyclic amines. Notably, this report is the first on the highly enantioselective hydrogenation of aromatic amines.     

Mono‐ and Bis(pyrrolo)tetrathiafulvalene Derivatives Tethered to C60: Synthesis,Photophysical Studies,and Self‐Assembled Monolayers

A series of mono‐ (MPTTF) and bis(pyrrolo)tetrathiafulvalene (BPTTF) derivatives tethered to one or two C₆₀ moieties was synthesized and characterized. The synthetic strategy for these dumbbell‐shaped compounds was based on a 1,3‐dipolar cycloaddition reaction between aldehyde‐functionalized MPTTF/BPTTF derivatives, two different tailor‐made amino acids, and C₆₀. Electronic communication between the MPTTF/BPTTF units and the C₆₀ moieties was studied by a variety of techniques including cyclic voltammetry and absorption spectroscopy. These solution‐based studies indicated no observable electronic communication between the MPTTF/BPTTF units and the C₆₀ moieties. In addition, femtosecond and nanosecond transient absorption spectroscopy revealed, rather surprisingly, that no charge transfer from the MPTTF/BPTTF units to the C₆₀ moieties takes place on excitation of the fullerene moiety. Finally, it was shown that the MPTTF–C₆₀ and C₆₀–BPTTF‐C₆₀ dyad and triad molecules formed self‐assembled monolayers on a Au(111) surface by anchoring to C₆₀.     

Alkene Isomerisation Catalysed by a Ruthenium PNN Pincer Complex

The [Ru(CO)H(PNN)] pincer complex based on a dearomatised PNN ligand (PNN: 2‐di‐tert‐butylphosphinomethyl‐6‐diethylaminomethylpyridine) was examined for its ability to isomerise alkenes. The isomerisation reaction proceeded under mild conditions after activation of the complex with alcohols. Variable‐temperature (VT) NMR experiments to investigate the role of the alcohol in the mechanism lend credence to the hypothesis that the first step involves the formation of a rearomatised alkoxide complex. In this complex, the hemilabile diethylamino side‐arm can dissociate, allowing alkene binding cis to the hydride, enabling insertion of the alkene into the metal–hydride bond, whereas in the parent complex only trans binding is possible. During this study, a new uncommon Ru⁰ coordination complex was also characterised. The scope of the alkene isomerisation reaction was examined.     

Electrochemical Determination of Organic Compounds in Automotive Fuels

This article critically reviews the electroanalytical methods devoted for the determination of organic compounds in automotive fuels that can range from contaminants to additives typically introduced into liquid biofuels and liquid fossil fuels. Contaminants such as aldehydes and ketones in bioethanol, free fatty acids and glycerol in biodiesel, and sulfur and nitrogen organic compounds in gasoline and diesel fuel, and additives such as colour markers and antioxidants added to fuels were determined by electroanalytical methods. Special focus is given to electrodes, electrochemical techniques, and sample preparation strategies. Future directions of research on electroanalysis of liquid fuels are presented.     

Development of a Simple and Fast Electrochemical Method for Screening and Stoichiometric Determination of Dimenhydrinate

Dimenhydrinate (DIM) is a salt composed by the combination of two active pharmaceutical ingredients: diphenhydramine (DIP) and 8‐chlorotheophylline (CTP). In this work, the use of batch injection analysis with multiple pulse amperometric detection (BIA‐MPA) was proposed for the first time for fast stoichiometric determination of DIM. DIP (cation) and CTP (anion) were determined simultaneously in pharmaceutical samples with a simple and fast injection procedure (70 injections h^?1). Additional strategies were also proposed for rapid screening of samples containing the DIM salt. By a simple injection of a sample into the BIA system (without using of calibration curve), reliable information about stoichiometry of the DIM salt (1 : 1; DIP:CTP) and presence or absence of interfering species (electroactive) can be achieved.     

A QM/MM study on the reaction pathway leading to 2‐Aceto‐2‐hydroxybutyrate in the catalytic cycle of AHAS

The reaction between the intermediate 2‐hydroxyethyl‐thiamin diphosphate (HEThDP^?) and 2‐ketobutyrate, in the third step of the catalytic cycle of acetodydroxy acid synthase, is addressed from a theoretical point of view by means of hybrid quantum/molecular mechanical calculations. The QM region includes one molecule of 2‐ketobutyrate, the HEThDP^? intermediate, and the residues Arg 380 y Glu 139; whereas the MM region includes the rest of the protein. The study includes potential energy surface scans to identify and characterize critical points on it, transition state search and activation barrier calculations. The results show that the reaction occurs via a two‐step mechanism corresponding to the carboligation and proton transfer in the first stage; and the product release in the second step. © 2014 Wiley Periodicals, Inc.     

Picolinamides as Effective Ligands for Copper‐Catalysed Aryl Ether Formation: Structure–Activity Relationships,Substrate Scope and Mechanistic Investigations

The use of picolinic acid amide derivatives as an effective family of bidentate ligands for copper‐catalysed aryl ether synthesis is reported. A fluorine‐substituted ligand gave good results in the synthesis of a wide range of aryl ethers. Even bulky phenols, known to be very challenging substrates, were shown to react with aryl iodides with excellent yields using these ligands. At the end of the reaction, the first examples of end‐of‐life Cu species were isolated and identified as Cu^II complexes with several of the anionic ligands tested. A preliminary mechanistic investigation is reported that suggests that the substituents on the ligands might have a crucial role in determining the redox properties of the metal centre and, consequently, its efficacy in the coupling process. An understanding of these effects is important for the development of new efficient and tunable ligands for copper‐based chemistry.     

Copolymerization of Ethylene with lO-Undecen-l-ol Using Highly Active Vanadium（III） Precatalysts Bearing Bis（imino）pyrrolyl Ligands

The copolymerizations of ethylene with 10-undecen-1-ol have been investigated using vanadium precatalysts, bis（imino）pyrrolyl vanadium（Ⅲ） complexes 1-3, 2,5-C4H2N（CH=NR）2VCl2（THF）2 [R = C6H5 （1）, 2,6-iPr2C6H3 （2）, C6F5 （3）], and the iminopyrrolyl and b-diketiminate ones for comparison. The polar monomer was pretreated by diethylaluminium chloride （present also as the cocatalyst） before the copolymerization. The monomer reactivity ratios were evaluated using the Fineman-Ross method. The ligand structure considerably influenced the catalytic activity and tolerance towards the polar monomer, the polar monomer incorporation and the molecular weights of the resultant copolymers. The bis（imino）pyrrolyl vanadium complexes exhibited promising catalytic performance for the copolymerization, and a high catalytic activity up to 3.84 kg/mmolv·h with a high comonomer incorporation of 14.0 mol% was achieved by complex 3 under mild conditions.