Binding Ensembles of p53-MDM2 Peptide Inhibitors by Combining Bayesian Inference and Atomistic Simulations

Designing peptide inhibitors of the p53-MDM2 interaction against cancer is of wide interest. Computational modeling and virtual screening are a well established step in the rational design of small molecules. But they face challenges for binding flexible peptide molecules that fold upon binding. We look at the ability of five different peptides, three of which are intrinsically disordered, to bind to MDM2 with a new Bayesian inference approach (MELD × MD). The method is able to capture the folding upon binding mechanism and differentiate binding preferences between the five peptides. Processing the ensembles with statistical mechanics tools depicts the most likely bound conformations and hints at differences in the binding mechanism. Finally, the study shows the importance of capturing two driving forces to binding in this system: the ability of peptides to adopt bound conformations (ΔGconformation) and the interaction between interface residues (ΔGinteraction).     

Pyridazine derivatives. Part 40: Reactivity of 5-alkynylpyridazin-3(2H)-ones toward hydrochloric acid

5-Alkynylpyridazin-3(2H)-ones or 5-(2-chloroalkenyl)pyridazin-3(2H)-ones were isolated during the cleavage of the methoxymethyl group in a series of 5-alkynyl-2-methoxymethylpyridazin-3(2H)-ones by treatment with hydrochloric acid. The efficient and selective cleavage of the methoxymethyl group in these compounds can be performed under mild conditions by employing aluminium chloride.     

Chemical, structural, and thermal properties of Zn(II)-Cr(III) layered double hydroxides intercalated with sulfated and sulfonated surfactants

Zn(II)-Cr(III)-LDHs (layered double hydroxides) containing sulfated or sulfonated surfactants as the interlamellar anion were synthesized by the coprecipitation method. The syntheses were conducted under various different experimental conditions, such as the Zn : Cr ratio, pH, and aging time. In each of the prepared materials, unlike previously reported data, the interlayer anion arrangement did not change, being consistent with a perpendicular monolayer. The thermal decomposition process of the prepared materials was studied by a set of analysis methods, such as TG/DTA, TG/MS, PXRD, and FT-IR. From the results obtained it was possible to conclude that, in an air atmosphere, the anions decomposed by a partial combustion, leading to the formation of sulfide. The results also showed that sulfonated surfactants containing LDHs are much more stable than those containing sulfated surfactants. A mechanism was proposed for the thermal decomposition of such LDHs based on the experimental results.     

The role of steric and electronic interactions in the stereocontrol of the asymmetric 1,3-dipolar reactions of 5-ethoxy-3-p-(S)-tolylsulfinylfuran-2(5H)-ones with diazoalkanes: theoretical calculations and experimental evidences

The addition of diazomethane and diazoethane to (5S,SS)- and (5R,SS)-5-ethoxy-3-p-tolylsulfinylfuran-2(5H)-ones (1a and 1b) and their 4-methylderivatives (2a and 2b) proceeded in almost quantitative yields and complete regioselectivity. The observed pi-facial selectivity is determined by the configurations at both C-5 and the sulfinyl group, the later being the most important. The syn adducts were almost exclusively obtained from 1a and 2a in apolar solvents but the pi-facial selectivity was strongly decreased in more polar solvents. On the other hand, the major adducts from 1b and 2b were the anti ones and such predominance was slightly increased with solvent polarity. The exo-selectivity was complete in all the cases except for the anti approach to compounds 2a (in polar solvents) and 2b. The role of the sulfinyl group in this behavior was inferred by comparison of these results with those obtained in reactions of diazoalkanes with 5-methoxyfuran-2(5H)-one (3). Steric interactions seem to be the main ones responsible for the observed exo selectivity of reactions with diazoethane, but electronic factors, which can be modulated by the solvent, are also significant in the pi-facial selectivity control. DFT computational methods are able to correctly predict the reactivity, regioselectivity, and pi-facial selectivity exhibited by 5-alkoxyfuranones as well as their changes with the solvent polarity. A C-H.O hydrogen bond, involving the oxygen atom of the 5-alkoxy group at dipolarophiles and the endo-hydrogen atom at dipoles, seems to play a key role in the electronic interactions influencing the stereochemical course of these reactions.     

Synthesis,characterization and coordination chemistry of the new tetraazamacrocycle 4,10-dimethyl-1,4,7,10-tetraazacyclododecane-1,7-bis(methanephosphonic acid monoethyl ester) dipotassium salt

A new potentially hexadentate tetraazamacrocycle based on the cyclen skeleton has been synthesized and fully characterized. The macrocycle 4,10-dimethyl-1,4,7,10-tetraazacyclododecane-1,7-bis(methanephosphonic acid monoethyl ester) dipotassium salt (Me2DO2PME) contains mutually trans monoethyl ester phosphonate acid substituents on two nitrogen atoms, and trans methyl substituents on the other two nitrogen atoms. The protonation constants of this macrocycle and the stability constants of its complexes with Cu2+, Zn2+, Gd3+ and Ca2+ ions have been determined by pH potentiometric titrations. The protonation sequence of the macrocycle has been studied by 1H, 31P[1H] and 13C[1H] NMR spectroscopy: the first and second protonation steps take place at the methyl-substituted nitrogen atoms, while the third protonation involves one oxygen from a phosphonate group. Upon protonation, all the CH2 ring protons become magnetically inequivalent on the NMR time scale due to a slow conformational rearrangement, most likely occasioned by the formation of multiple hydrogen bonds within the macrocyclic ring. Me2DOPM forms neutral, mononuclear complexes with all the metals investigated. The presence of hydroxo complexes was observed for Ca2+ and Zn2+ at high pH values. Structural information on the neutral complex [Cu(Me2DO2PME)] has been obtained by a solution X-Band EPR study. It is proposed that Me2DO2PME binds Cu2+ in a distorted octahedral structure using all of its donor atoms, i.e. the four nitrogen atoms and the two phosphonate oxygen atoms. The redox chemistry of [Cu(Me2DO2PME)] in dimethyl sulfoxide and water has been studied by electrochemical measurements. Cyclic voltammetry in DMSO shows the complex to undergo a quasireversible one-electron reduction step leading to an unstable CuI species.     

VISIBLE CHEMILUMINESCENCE ASSOCIATED WITH THE REACTION BETWEEN METHEMOGLOBIN OR OXYHEMOGLOBIN WITH HYDROGEN PEROXIDE

Abstract Visible chemiluminescence is emitted in the irreversible deactivation of hemoglobin or methemoglobin with excess H₂O₂. The emission takes place in two phases. The most intense one lasts a few seconds and is followed by a second phase of lower intensity that remains for longer periods. This second phase presents chaotic or sustained oscillations. Free radicals are implicated in the luminescent process since the emission can be reduced by free radical scavengers such as 6-hydroxy-2,5,7,8,-tetramethylchroman-2-carboxylic acid (Trolox) or ascorbic acid. These additives lead to a delay in reaching the maximum intensity, which can be related to their consumption, implying substantial recycling of the hemoprotein. Chemiluminescence is also observed in the oxidation of hemin by H₂O₂, suggesting a role for the heme group in the processes leading to the excited state production. The lower intensity observed in the presence of hemin can be related to the contribution of the globin chains.     

Two thiourea‐containing gold(I) complexes

The crystal structures of two salts of bis­(thio­urea)­gold(I) complexes, namely bis­(thio­urea‐κS)­gold(I) chloride, [Au(CH₄N₂S)₂]Cl, (I), and bis­[bis­(thio­urea‐κS)­gold(I)] sulfate, [Au(CH₄N₂S)₂]₂SO₄, (II), have been determined. The chloride salt, (I), is isomorphous with the corresponding bromide salt, although there are differences in the bonding. The Au^I ion is located on an inversion centre and coordinated by two symmetry‐related thio­urea ligands through the lone pairs on their S atoms [Au—S 2.278 (2) Å and Au—S—C 105.3 (2)°]. The sulfate salt, (II), crystallizes with four independent [Au(CH₄N₂S)₂]⁺ cations per asymmetric unit, all with nearly linear S—Au—S bonding. The cations in (II) have similar conformations to that found for (I). The Au—S distances range from 2.276 (3) to 2.287 (3) Å and the Au—S—C angles from 173.5 (1) to 177.7 (1)°. These data are relevant in interpreting different electrochemical processes where gold–thio­urea species are formed.     

Determination of the amino acid tryptophan and the biogenic amine tryptamine in foods by the heavy atom induced-room temperature phosphorescence methodology

Very simple and selective methods are presented to determine the amino acid tryptophan (Trp) and the biogenic amine tryptamine (Tryp), both compounds with an indole-type molecular structure by the methodology named Heavy Atom Induced-Room Temperature Phosphorescence (HAI-RTP) which constitutes the first time that HAI-RTP has been used to detect compounds with non-naphthalenic structures in their molecules. Different variables affecting the phosphorescence signal (heavy atom perturber and sodium sulfite concentration) were carefully studied. The analytical curves give a linear dynamic range of 15-100 ng ml(-1) and a detection limit of 4 ng ml(-1) for Trp and 94-400 ng ml(-1) and 28 ng ml(-1) for Tryp. The methods have been successfully applied to the analysis of complex food matrices such as the presence of tryptophan in yoghurt and tryptamine in bottled beer. A single alkaline hydrolysis to release Trp from yoghurt proteins and two methods for extracting Tryp from beer samples are proposed and optimised. A total Trp content of 374 mg of Trp per kg of yoghurt was quantified by the standard addition method of calibration and a recovery of 90% was obtained for 250 ng ml(-1) of Tryp in spiked non-alcoholic beer samples.     

Trapped electrons in substoichiometric MoO3 observed by X-ray electron spectroscopy

Substoichiometric amorphous thin films of MoO₃ in both the transparent and absorptive forms have been studied by X-ray electron spectroscopy. The transparent films can be colored blue (absorptive) electrically or by UV irradiation. The electron distribution curve of the blue film exhibits a small band near the Fermi edge which is absent in the transparent sample. This new band is attributed to electrons trapped in positively charged anion vacancies in the substoichiometric MoO₃ lattice. This model provides an interpretation of the electrical conductivity and color of the films.     

Total synthesis of (-)-microcarpalide, a novel microfilament disrupting metabolite

The stereoselective total synthesis of (-)-microcarpalide, a recently discovered 10-membered lactone of fungal origin displaying a remarkable disrupting action on actin microfilaments, was accomplished by using ring-closing metathesis (RCM) as the key step for the formation of the medium-sized ring. The diene ester required for the macrocyclization reaction was assembled via DCC-mediated esterification of two suitable partners, each bearing a terminal alkene group. The alcohol fragment was synthesized from n-bromohexane through a seven-step sequence entailing two consecutive stereoselective homologations of chiral boronic esters as strategic transformations for the sequential insertion of the two stereocentres with the final S absolute configuration, using (+)-pinanediol as the chiral director; final elaboration to the desired C(11) framework envisaged treatment with an allyl Grignard reagent and oxidative cleavage of the boronic scaffold. In contrast, the acidic fragment was prepared in ten steps from d-tartaric acid, whose C(4) backbone was elongated to the required C(7) skeleton by means of two distinct Swern-Wittig oxidation-homologation sequences.