Influence of the steel powder type and processing parameters on the debinding of PM compacts with gelatin binder

Binders present an important part of the powder metallurgy technology as they are vital to provide efficient powder agglomeration and/or lubrication during shaping. At the same time, they have to be easily removed from the compacts during initial stages of sintering without any harmful effect for the base material, as well as for the environment. Therefore, behavior of gelatin as a binder for stainless- and tool-steel gas-atomised powder compacts was studied by thermal analysis and electron microscopy. Thermal analysis showed that peak mass-loss occurred in the range between 340 and 370 °C, depending on the base powder and heating rate. Risk for base powder oxidation at temperatures below 425 °C was detected. Based on the obtained results, it is recommended to perform debinding at ~425 °C after applying a heating rate of around 7.5 °C min^?1. Only in this way efficient enough binder removal can be obtained concurrently to avoiding base powder oxidation.     

Long‐Lived Spin States for Low‐Field Hyperpolarized Gas MRI

Parahydrogen induced polarization was employed to prepare a relatively long‐lived correlated nuclear spin state between methylene and methyl protons in propane gas. Conventionally, such states are converted into a strong NMR signal enhancement by transferring the reaction product to a high magnetic field in an adiabatic longitudinal transport after dissociation engenders net alignment (ALTADENA) experiment. However, the relaxation time T₁ of ～0.6 s of the resulting hyperpolarized propane is too short for potential biomedical applications. The presented alternative approach employs low‐field MRI to preserve the initial correlated state with a much longer decay time T_LLSS=(4.7±0.5) s. While the direct detection at low‐magnetic fields (e.g. 0.0475 T) is challenging, we demonstrate here that spin‐lock induced crossing (SLIC) at this low magnetic field transforms the long‐lived correlated state into an observable nuclear magnetization suitable for MRI with sub‐millimeter and sub‐second spatial and temporal resolution, respectively. Propane is a non‐toxic gas, and therefore, these results potentially enable low‐cost high‐resolution high‐speed MRI of gases for functional imaging of lungs and other applications.     

Heterogeneous Solution NMR Signal Amplification by Reversible Exchange

A novel variant of an iridium‐based organometallic catalyst was synthesized and used to enhance the NMR signals of pyridine in a heterogeneous phase by immobilization on polymer microbead solid supports. Upon administration of parahydrogen (pH₂) gas to a methanol mixture containing the HET‐SABRE catalyst particles and the pyridine, up to fivefold enhancements were observed in the ¹H NMR spectra after sample transfer to high field (9.4 T). Importantly, enhancements were not due to any residual catalyst molecules in solution, thus supporting the true heterogeneity of the SABRE process. Further significant improvements may be expected by systematic optimization of experimental parameters. Moreover, the heterogeneous catalyst is easy to separate and recycle, thus opening a door to future potential applications varying from spectroscopic studies of catalysis, to imaging metabolites in the body without concern of contamination from expensive and potentially toxic metal catalysts or accompanying organic molecules.     

Synthesis of new-type 1,3,6-triazocine via intramolecular reactions of iodocyclization and [3+2] azido cycloaddition

Selective iodocyclization of 6-(alkenylamino)-1-allylpyrazolo[3,4-d]pyrimidines provided hydrogenated derivatives of 1-allyl-8(9)-iodomethylimidazo(pyrimido)[1,2-a]pyrazolo[4,3-e]pyrimidines which were further reacted with NaN₃ at 75°С to 80°С to give a series of new-type 1,3,6-triazocines annulated with the pyrazole, pyrimidine, imidazole (or pyrimidine), and 1,2,3-triazole rings. The compounds synthesized were structurally characterized by analytical, spectral (IR, ¹H and ¹³C NMR, HPLC-mass), and X-ray diffraction data.     

RuII and RuIII Chloronitrile Complexes: Synthesis,Reaction Chemistry,Solid State Structure,and (Spectro)Electrochemical Behavior

The synthesis of [Ti₆O₄(OiPr)₈(O₂CPh)₈] ( 3 ) and [RuCl(N≡CR)₅][RuCl₄(N≡CR)₂] ( 4a , R = Me; 4b , R = Ph), [Ru(N≡CPh)₆][RuCl₄(N≡CPh)₂] ( 5 ) and [H₃O][RuCl₄(N≡CMe)₂] ( 7a ) is discussed. Crystallization of 5 from CH₂Cl₂ gave trans-[RuCl₂(N≡CPh)₄] ( 6 ). The solid-state structures of 3 , 4a , b , 5 , 6 and 7a are reported. Complex 4b forms a 3D network, while 6 displays a 2D structure, due to π-interactions between the benzonitrile ligands. The (spectro)electrochemical behavior of 4a , b and 6 was studied at 25 and –72 °C and the results thereof are compared with [NEt₄][RuCl₄(N≡CMe)₂] ( 7b ) and [RuCl(N≡CPh)₅][PF₆] ( 8 ). The electrochemical response of the cation and the anion in 4a , b are independent from each other. [RuCl(N≡CR)₅]⁺ possesses one reversible Ru^II/Ru^III process. However, [RuCl₄(N≡CMe)₂]^– was shown to be prone to ligand exchange and disproportionation upon formation of either a Ru^IV and Ru^II species at 25 °C, while at –72 °C the rapid conversion of the electrochemically formed species is hindered. In situ IR and UV/Vis/NIR studies confirmed the respective disproportionation reaction products of the aforementioned oxidation and reduction, respectively.     

From 1D to 2D Cd(II) and Zn(II) Coordination Networks by Replacing Monocarboxylate with Dicarboxylates in Partnership with Azine Ligands: Synthesis,Crystal Structures,Inclusion, and Emission Properties

Eight mixed-ligand coordination networks, [Cd(2-aba)(NO₃)(4-bphz)_3/2]_n·n(dmf) (1), [Cd(2-aba)₂(4-bphz)]_n·0.75n(dmf) (2), [Cd(seb)(4-bphz)]_n·n(H₂O) (3), [Cd(seb)(4-bpmhz)]_n·n(H₂O) (4), [Cd(hpa)(3-bphz)]_n (5), [Zn(1,3-bdc)(3-bpmhz)]_n·n(MeOH) (6), [Cd(1,3-bdc)(3-bpmhz)]_n ·0.5n(H₂O)·0.5n(EtOH) (7), and [Cd(NO₃)₂(3-bphz)(bpe)]_n·n(3-bphz) (8) were obtained by interplay of cadmium nitrate tetrahydrate or zinc nitrate hexahydrate with 2-aminobenzenecarboxylic acid (H(2-aba)), three dicarboxylic acids, sebacic (decanedioic acid, H₂seb), homophthalic (2-(carboxymethyl)benzoic acid, H₂hpa), isophthalic (1,3-benzenedicarboxylic acid, H₂(1,3-bdc)) acids, bis(4-pyridyl)ethane (bpe) and with four azine ligands, 1,2-bis(pyridin-4-ylmethylene)hydrazine (4-bphz), 1,2-bis(1-(pyridin-4-yl)ethylidene) hydrazine (4-bpmhz), 1,2-bis(pyridin-3-ylmethylene)hydrazine (3-bphz), and 1,2-bis(1-(pyridin-3-yl) ethylidene)hydrazine (3-bpmhz). Compounds 1 and 2 are 1D coordination polymers, while compounds 3–8 are 2D coordination polymers. All compounds were characterized by spectroscopic and X-ray diffraction methods of analysis. The solvent uptakes and stabilities to the guest evacuation were studied and compared for 1D and 2D coordination networks. The de-solvated forms revealed a significant increase of emission in comparison with the as-synthesized crystals.     

Parahydrogen‐Induced Radio Amplification by Stimulated Emission of Radiation

Radio amplification by stimulated emission of radiation (RASER) was recently discovered in a low‐field NMR spectrometer incorporating a highly specialized radio‐frequency resonator, where a high degree of proton‐spin polarization was achieved by reversible parahydrogen exchange. RASER activity, which results from the coherent coupling between the nuclear spins and the inductive detector, can overcome the limits of frequency resolution in NMR. Here we show that this phenomenon is not limited to low magnetic fields or the use of resonators with high‐quality factors. We use a commercial bench‐top 1.4 T NMR spectrometer in conjunction with pairwise parahydrogen addition producing proton‐hyperpolarized molecules in the Earth's magnetic field (ALTADENA condition) or in a high magnetic field (PASADENA condition) to induce RASER without any radio‐frequency excitation pulses. The results demonstrate that RASER activity can be observed on virtually any NMR spectrometer and measures most of the important NMR parameters with high precision.     

Ligand Design for Site-Selective Metal Coordination: Synthesis of Transition-Metal Complexes with η6-Coordination of the Central Ring of Anthracene

A polycyclic aromatic ligand for site-selective metal coordination was designed by using DFT calculations. The computational prediction was confirmed by experiments: 2,3,6,7-tetramethoxy-9,10-dimethylanthracene initially reacts with [(C₅H₅)Ru(MeCN)₃]BF₄ to give the kinetic product with a [(C₅H₅)Ru]⁺ fragment coordinated at the terminal ring, which is then transformed into the thermodynamic product with coordination through the central ring. These isomeric complexes have markedly different UV/Vis spectra, which was explained by analysis of the frontier orbitals. At the same time, the calculations suggest that electrostatic interactions are mainly responsible for the site selectivity of the coordination.