Comment on papers by K. Shanahan that propose to explain anomalous heat generated by cold fusion

Dr. Shanahan has published two papers (Thermochim. Acta 428 (2005) 207, Thermochim. Acta 382 (2002) 95) in which he argues that excess heat claimed to be produced by cold fusion is actually caused by errors in heat measurement. In particular, he proposes that unrecognized changes in the calibration constant are produced by changes in the locations where heat is being generated within the electrolytic cell over the duration of the measurement. Because these papers may lend unwarranted support to rejection of cold fusion claims, these erroneous arguments used by Shanahan need to be answered.     

Simultaneous determination of hydrogen as its iodine equivalent and of nitrogen by a volumetric method

Summary The method developed for simultaneous determination of hydrogen (by means of an equivalent amount of iodine) and of nitrogen by a volumetric method, is based on a flash combustion technique in a stream of CO₂ (100 ml/min) with controlled addition of O₂ (20%). Hydrogen is determined by conversion of water into hydrogen chloride on anhydrous magnesium chloride heated at 600–650° C, and reaction of the hydrogen chloride with Ag₂OI₂ at 220° C to yield iodine, which is collected on silver and weighed. The precision of the determination of hydrogen is excellent, the standard deviation being 0.008–0.017% abs., about a tenth of that obtained by the classical methods. The error in the determination of hydrogen was ±0.006% abs.

---

Gleichzeitige Bestimmung von Wasserstoff als dessen Jodäquivalent und von Stickstoff auf volumetrischem Wege

Zusammenfassung Die entwickelte Methode zur gleichzeitigen Bestimmung von Wasserstoff in Form seines Jodäquivalents und von Stickstoff auf gasvolumetrischem Wege beruht auf der Entflammungsmineralisation im CO₂-Strom (100 cm³/min) mit kontrolliertem Zusatz von O₂ (20%). Der Gasstrom wird zusätzlich über P₂O₅ getrocknet. Die dem Wasserstoff äquivalente Jodmenge wird an metallischem Silber gebunden und gravimetrisch bestimmt, wobei Wasser bei 600–650° C mit Magnesiumchlorid in Chlorwasserstoff übergeführt wird, der nachfolgend bei 220° C mit Ag₂Oj₂ zu Jod umgesetzt wird. Für Verbindungen, die neben C, H, N und O auch Br, Cl, P und S enthalten, werden Wasserstoffresultate mit hoher Präzision erzielt:s _H beträgt 0,008 bis 0,017% absolut und ist etwa 10mal kleiner als bei den üblichen, klassischen Methoden. Die Genauigkeit der Wasserstoffbestimmung entspricht einem mittleren Fehler=±0,006% absolut. Die Resultate für den Wasserstoff und Stickstoff verlangen eine Blindwertkorrektur.

     

Side-chain crystallinity. III. Influence of side-chain crystallinity on the glass transition temperatures of selected copolymers incorporating n-octadecyl acrylate or vinyl stearate

The influence of side-chain crystallinity on the glass transition temperatures of selected copolymers was investigated. The copolymers were selected, in part, from those whose crystallinity was treated in the preceding paper. These included the lower amorphous acrylate esters, such as methyl, ethyl, n-butyl, and 2-ethylhexyl acrylates, together with methyl methacrylate and acrylonitrile, each copolymerized with n-octadecyl acrylate over the range of composition. The decline in the glass transition temperature was linear with increasing weight fraction of n-octadecyl acrylate for all systems in the composition range where the copolymers were essentially amorphous. The extrapolated T_g for the amorphous state of poly(n-octadecyl acrylate), and for amorphous poly(oleyl acrylate), was close to ?111°C. This coincided with a value previously obtained by an extrapolation of data on homologs. Beyond a critical fraction of octadecyl acrylate (0.3 to 0.5), developing side-chain crystallinity in n-octadecyl acrylate raised the glass temperature steadily for all systems, up to a value of 17-C, obtained for the crystalline homopolymer. Crystallinity did not develop in stiff copolymers until T_g was about 30°C below the melting point of the most perfect crystals. In compositionally heterogeneous copolymers incorporating vinyl stearate, blocks of crystalline units appeared to be dispersed in a glassy matrix of amorphous co-units. An empirical equation was derived which fitted the experimental data for random copolymers, over all composition ranges, with fair accuracy.     

Determination of Volatile Halogenated Compounds in Tap and Surface Waters from the Gdańsk District

Abstract

The present method is based on preconcentration of organic contaminants on XAD-4 as sorbent, thermal desorption, mineralization and coulometric argentometric titration for the final determination of halides. The results were calculated as the total parameter VOX (volatile organic halogen) expressed as chlorine. The method has been used for the VOX determination in tap water, Vistula river water and Baltic Sea water. Sampling of the Baltic Sea water has been carried out during the research cruise of the r/v ‘Oceania’. The relatively high anthropogenic pollution of the river Vistula (c _vox = 11–45 μg Cl/cd³), Gulf of Gdańsk (c _vox = 0.6–4.5 μg Cl/dm³) and the Pomerania Bay (c _vox = 2 μg Cl/dm³) has been determined. The VOX concentration in the tap water varied between 13 and 56 μg/dm³; that is, this water is seriously polluted by volatile organic halogen compounds.     

A 3D-CMOS compatible silicon photo-sensor with a large vertical photosensitive area

This paper introduces design and simulation of a three-dimensional complementary metal–oxide–semiconductor CMOS compatible photo-sensor based on a silicon substrate. In the structure of photo-sensor, a vertical n+/p junction as a photosensitive area is formed on one side of a U-groove, and perpendicular to a lateral n-i-p structure on top-side of the silicon surface. This configuration enables a direct butt-coupling of a fiber-optic to the photosensitive area, which is a privilege for many remote monitoring applications. The device analysis is carried out by a two-dimensional simulation using SILVACO TCAD simulator. The thickness of the photo-sensitive area is investigated by considering the figures of merit for the two different thicknesses of 30 and 50 µm. The simulated results (according to the parameters defined for the Si substrate) show a very low dark current of 70 and 100 (fA/μm) for the 30 and 50 µm thicknesses, respectively. In addition, a high photo-current to dark current ratio of ~3000 is achieved under an intensity of 2 mW/cm² at 633 nm wavelength, according to the wavelength of red He–Ne laser. The sensor demonstrates a responsivity of 0.33 A/W corresponding to 65% external quantum efficiency and a ?3 dB frequency response of 0.2 GHz under a small signal of 2 mW/cm² at 633 nm wavelength for 10 V reverse bias.     

Buffons Nadelproblem und verwandte probleme behandelt mit der Theorie der Gleichverteilung

The famous needle-problem of Buffon leads — as is well known — to a method to approximate with probability 1 with empirical tests. In this article, the value of approximation is treated in the case when the discrepancy of the basic random sequence is known. Some generalizations of the problem are also considered.     

Mixed 2D molecular systems: Mechanic, thermodynamic and dielectric properties

Study of Langmuir monolayers consisting of stearic acid (SA) and dipalmitoylphosphatidylcholine (DPPC) molecules was done by surface pressure-area isotherms (π-A), the Maxwell displacement current (MDC) measurement, X-ray reflectivity (XRR) and atomic force microscopy (AFM) to investigate the selected mechanic, thermodynamic and dielectric properties based on orientational structure of monolayers. On the base of π-A isotherms analysis we explain the creation of stable structures and found optimal monolayer composition. The dielectric properties represented by MDC generated monolayers were analyzed in terms of excess dipole moment, proposing the effect of dipole-dipole interaction. XRR and AFM results illustrate deposited film structure and molecular ordering.     

Models and algorithms for skip-free Markov decision processes on trees

We introduce a class of models for multidimensional control problems that we call skip-free Markov decision processes on trees. We describe and analyse an algorithm applicable to Markov decision processes of this type that are skip-free in the negative direction. Starting with the finite average cost case, we show that the algorithm combines the advantages of both value iteration and policy iteration—it is guaranteed to converge to an optimal policy and optimal value function after a finite number of iterations but the computational effort required for each iteration step is comparable with that for value iteration. We show that the algorithm can also be used to solve discounted cost models and continuous-time models, and that a suitably modified algorithm can be used to solve communicating models.