Modeling the sound transmission between rooms coupled through partition walls by using a diffusion model

In this paper, a modification of the diffusion model for room acoustics is proposed to account for sound transmission between two rooms, a source room and an adjacent room, which are coupled through a partition wall. A system of two diffusion equations, one for each room, together with a set of two boundary conditions, one for the partition wall and one for the other walls of a room, is obtained and numerically solved. The modified diffusion model is validated by numerical comparisons with the statistical theory for several coupled-room configurations by varying the coupling area surface, the absorption coefficient of each room, and the volume of the adjacent room. An experimental comparison is also carried out for two coupled classrooms. The modified diffusion model results agree very well with both the statistical theory and the experimental data. The diffusion model can then be used as an alternative to the statistical theory, especially when the statistical theory is not applicable, that is, when the reverberant sound field is not diffuse. Moreover, the diffusion model allows the prediction of the spatial distribution of sound energy within each coupled room, while the statistical theory gives only one sound level for each room.     

Capillary-gravity waves generated by a slow moving object

We investigate theoretically and experimentally the capillary-gravity waves created by a small object moving steadily at the water-air interface along a circular trajectory. It is well established that, for straight uniform motion, no steady waves appear at velocities below the minimum phase velocity c(min)=23 cm s(-1). We demonstrate that no such velocity threshold exists for a steady circular motion, for which, even for small velocities, a finite wave drag is experienced by the object. This wave drag originates from the emission of a spiral-like wave pattern. Our results are in good agreement with direct experimental observations of the wave pattern created by a circularly moving needle in contact with water. Our study leads to new insights into the problem of animal locomotion at the water-air interface.     

Three-dimensional through-bond homonuclear-heteronuclear correlation experiments for quadrupolar nuclei in solid-state NMR applied to (27)Al-O-(31)P-O-(27)Al networks

We present here the first 3D homonuclear/heteronuclear correlation experiment applied to quadrupolar nuclei and making use of the sole scalar J-coupling. This experiment, based on the 2D-Homonuclear-Heteronuclear Single Quantum Correlation (H-HSQC) experiment, uses a relayed transfer from the (27)Al central transition to neighbouring (31)P spins and to the central transition of a second (27)Al. It confirms the correlation map characterizing the two (27)Al and the (31)P NMR signatures of (27)Al-O-(31)P-O-(27)Al chemically bonded molecular motifs.     

Perceptually based head-related transfer function database optimization

In the context of binaural audio rendering, choosing the best head-related transfer function (HRTF) for an individual from large databases poses several problems. This study proposes a method to reduce the size of a given HRTF database. Participants, 45 in total, were asked to rate the quality of binaural synthesis for 46 HRTFs. The lack of reciprocity in the ratings was noted. Results were used to create a perceptually optimized HRTF subset which satisfied all participants' judgments. The subset was validated using localization tests on a separate group of subjects with results showing reduced errors when subjects were given their best choice, rather than their worst choice HRTF.     

X‐ray‐Raman‐scattering‐based EXAFS beyond the dipole limit

X‐ray Raman scattering (XRS) provides a bulk‐sensitive method of measuring the extended X‐ray absorption fine structure (EXAFS) of soft X‐ray absorption edges. Accurate measurements and data analysis procedures for the determination of XRS‐EXAFS of polycrystalline diamond are described. The contributions of various angular‐momentum components beyond the dipole limit to the atomic background and the EXAFS oscillations are incorporated using self‐consistent real‐space multiple‐scattering calculations. The properly extracted XRS‐EXAFS oscillations are in good agreement with calculations and earlier soft X‐ray EXAFS results. It is shown, however, that under certain conditions multiple‐scattering contributions to XRS‐EXAFS deviate from those in standard EXAFS, leading to noticeable changes in the real‐space signal at higher momentum transfers owing to non‐dipole contributions. These results pave the way for the accurate application of XRS‐EXAFS to previously inaccessible light‐element systems.     

Transient adaptivity applied to two-phase incompressible flows

An anisotropic adaptation process is applied to a three-dimensional incompressible two-phase flow solver. The solver uses a level set/finite element method on unstructured tetrahedral meshes. We show how the level set function can be used to build an anisotropic mesh with good properties. Some computations with a strong transient character and large densities ratios (1/1000) are presented. We show that the efficiency of the computations can be deeply enhanced by mesh adaptations.     

Electron irradiation-enhanced core/shell organization of Al(Cr,Fe, Mn)Si dispersoids in Al–Mg–Si alloys

The age hardening 6061-T6 aluminium alloy has been chosen as structural material for the core vessel of the material testing Jules Horowitz nuclear reactor. The alloy contains incoherent Al(Cr, Fe, Mn)Si dispersoids whose characterization by energy-filtered transmission electron microscopy (EFTEM) analysis shows a core/shell organization tendency where the core is (Mn, Fe) rich, and the shell is Cr rich. The present work studies the stability of this organization under irradiation. TEM characterization on the same particles, before and after 1 MeV electron irradiation, reveals that the core/shell organization is enhanced after irradiation. It is proposed that the high level of point defects, created by irradiation, ensures a radiation-enhanced diffusion process favourable to the unmixing forces between (Fe, Mn) and Cr. Shell formation may result in the low-energy interface segregation of Cr atoms within the (Fe, Mn) system combined with the unmixing of Cr, Fe and Mn components.     

Effect of random coupling of orthogonal modes on polarization characteristics of single-mode fiber optical waveguides (SMF) and SMF-based ring interferometers. I. Change in the degree of polarization of nonmonochromatic radiation propagating through a single-mode fiber optical waveguide

We propose a method for calculating the degree of polarization of nonmonochromatic radiation as it propagates through a single-mode fiber optical waveguide (SMF), based on dividing the length of the fiber into segments equal to the depolarization length of the radiation in the SMF. We have obtained the dependences of the degree of polarization of the radiation on the length of the fiber for an SMF with strong and weak anisotropy. In the case of anisotropic SMF's characterized by weak coupling of orthogonal modes, the results match those obtained previously by other calculation methods. The results for weakly anisotropic SMF's characterized by strong coupling of orthogonal modes are obtained here for the first time.Institute of Applied Physics, Russian Academy of Sciences. Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Radiofizika, No. 10, pp. 1311–1320, October, 1994.     

Delayed fracture in porous media

The fracture of porous media subjected to a constant load is studied. Contrary to homogeneous solids in which fracture usually happens instantaneously at a well-defined breaking strength, the fracture of a porous medium can occur with a delay, allowing us to quantify the average lifetime of the unbroken material. We show that the average fracture probability, a key property for risk analysis in civil engineering, is given by the probability of crack nucleation. The nucleation process can be understood qualitatively by calculating the activation energy for crack nucleation, taking into account the porosity of the medium.     

Analysis of temperature effect in dielectric response of electrostrictive polymers for pseudo-pyroelectric operations

Thanks to their flexibility and easy processability, electroactive polymers have gained a lot of attention over the last decades. More specifically, dielectric electrostrictive polymers have been demonstrated to provide interesting ways for mechanical actuation and energy harvesting or for electrocaloric applications. This Letter aims at presenting an additional application potential of such materials, showing their ability in terms of converting thermal energy into electrical energy. More particularly, it is shown that such materials, once polarized through the application of a bias electric field, allow a polarization variation with the temperature, yielding the so-called pseudo-pyroelectric effect. Theoretical analysis, supported by experiments, therefore demonstrates that such a material can exhibit pseudo-pyroelectric activity that can be tuned with the applied electric field.