Kinetic studies of some substituted hexarhodium carbonyl clusters

Reactions of the halides X- (X- = chloride, bromide or iodide) with the substituted cluster Rh6(CO)15(PPh3) in oxygen-free chloroform lead to [Rh5(CO)14(PPh3)]-, Rh(CO)2(PPh3)2X and [Rh(CO)2X2]- in the molar ratios 2:1: approximately 13. Oxidation by the solvent is assumed to lead to most of the Rh(I) product, and the stoichiometry for reactions with I- can be defined as 4Rh6(CO)15(PPh3) + 27I- + 12CHCl3 --> 2[Rh5(CO)14(PPh3)]- + Rh(CO)2(PPh3)2I + 13[Rh(CO)2I2]- + 6C2H2Cl4 + 4CO + 12Cl-. This can be rationalized quite simply with the aid of a few generally justifiable assumptions. Rate constants for reactions with bromide increase to a limiting value with increasing [Br-] in a way that shows that breaking of one Rh-Rh bond, with an unusual closo to nido structural change, is rate determining. This opening of the cluster might be spontaneous or solvent induced. To complete the reaction, the bromide has to compete with the reverse nido to closo change. The same closo to nido change is also a major rate determining step for reactions with P(OPh)3 in oxygen-free solutions, and for reactions with bromide in oxygenated solutions in the presence of trifluoroacetic and some other acids. The limiting rates increase slightly with increasing basicity of the ligands P(p-XC6H4)3 along the series X = F3C, Cl, F, H and MeO. Activation parameters for these reactions are reported.     

Can a single oxidant with two spin states masquerade as two different oxidants? A study of the sulfoxidation mechanism by cytochrome p450

Density functional calculations were performed on the sulfoxidation reaction by a model compound I (Cpd I) of cytochrome P450. By contrast to previous alkane hydroxylation studies, which exhibit a dominant low-spin (LS) pathway, the sulfoxidation follows a dominant high-spin (HS) reaction. Thus, competing hydroxylation and sulfoxidation processes as observed for instance by Jones et al. (Volz, T. J.; Rock, D. A.; Jones, J. P. J. Am. Chem. Soc. 2002, 124, 9724) are the result of a two-state reactivity scenario, whereby the hydroxylation originates from the LS pathway and the sulfoxidation from the HS pathway. In this manner, two spin states of a single oxidant (Cpd I) can be disguised as two different oxidants. The calculations rule out the possibility that a second oxidant (the ferric peroxide, Cpd 0 species) interferes in the observed results of Jones et al.     

Modelling and mutation studies on the histamine H1-receptor agonist binding site reveal different binding modes for H1-agonists: Asp116 (TM3) has a constitutive role in receptor stimulation

Summary A modelling study has been carried out, investigating the binding of histamine (Hist), 2-methylhistamine (2-MeHist) and 2-phenylhistamine (2-PhHist) at two postulated agonistic binding sites on transmembrane domain 5 (TM5) of the histamine H₁-receptor. For this purpose a conformational analysis study was performed on three particular residues of TM5, i.e., Lys²⁰⁰, Thr²⁰³ and Asn²⁰⁷, for which a functional role in binding has been proposed. The most favourable results were obtained for the interaction between Hist and the Lys²⁰⁰/Asn²⁰⁷ pair. Therefore, Lys²⁰⁰ was subsequently mutated and converted to an alanine, resulting in a 50-fold decrease of H₁-receptor stimulation by histamine. Altogether, the data suggest that the Lys²⁰⁰/Asn²⁰⁷ pair is important for activation of the H₁-receptor by histamine. In contrast, analogues of 2-PhHist seem to belong to a distinct subclass of histamine agonists and an alternative mode of binding is proposed in which the 2-phenyl ring binds to the same receptor location as one of the aromatic rings of classical histamine H₁-antagonists. Subsequently, the binding modes of the agonists Hist, 2-MeHist and 2-PhHist and the H₁-antagonist cyproheptadine were evaluated in three different seven--helical models of the H₁-receptor built in homology with bacteriorhodopsin, but using three different alignments. Our findings suggest that the position of the carboxylate group of Asp¹¹⁶ (TM3) within the receptor pocket depends on whether an agonist or an antagonist binds to the protein; a conformational change of this aspartate residue upon agonist binding is expected to play an essential role in receptor stimulation.Abbreviations 2-MeHist 2-methylhistamine - 2-PEA 2-pyridyl-ethylamine - 2-PhHist 2-phenylhistamine - CHO Chinese hamster ovary - E_int interaction energy - E_str strain energy - GES global energy structure - gpH₁R guinea pig H₁-receptor - GPCR G-protein coupled receptor - Hist histamine - N proximal nitrogen - N tele nitrogen - TM transmembrane domain - WT wild type     

Cyclen based bis-macrocyclic ligands as phosphates receptors. A potentiometric and NMR study

The host-guest interaction between orthophosphate, pyrophosphate and triphosphate anions and four cyclen based bis-macrocycles ligands possessing ortho-(BOC), meta-(BMC), para-xylenyl (BPC) or 2,6-pyridinyl (BPyC) linker was investigated by potentiometric measurements and NMR spectroscopy. Each ligand gave protonated species in aqueous solution that further formed ternary complexes after binding with anions; these complexes were analyzed as a result of hydrogen bond formation and Coulombic attraction between the organic host and the inorganic guest. The equilibrium constants for all the detected species are reported and the selectivity, illustrated with species distribution diagrams, is discussed. The results unambiguously showed the importance of the distance between the two cyclen cores and underlined, especially for the triphosphate species, the contribution of the nitrogen atom of the pyridinyl spacer as a supplementary anchoring point in acidic medium.     

Development of a reversed-phase thin-layer chromatographic method for artemisinin and its derivatives

In this study a clear separation between seven analogues of artemisinin on thin-layer chromatography (TLC) is presented. The developed TLC method is carried out on a RP-C18 thin-layer plate using acetonitrile-water (50:25 v/v) as the mobile phase. Spots are visualized by derivatization with an acidified 4-methoxybenzaldehyde reagent in methanol-water. This method allows the separation of a diverse group of compounds that have versatile hydrophilic/lipophilic characteristics; namely artemisinin, artesunate (AS), artelinic acid (AL), arteether (AE), both isomers of artemether (AM) (alpha and beta), dihydroartemisinin, and desoxyartemisinin. Separation of some degradation products and impurities, down to 2%, allows quality control and stability investigation of all actives in raw material and pharmaceutical formulations. The method is further developed via densitometric measurement for quantitative determination purposes for AL and AS. The derivatization technique is evaluated, showing good stability and reproducibility of the coloring process. Percent relative standard deviation values are less than 5% for replicates, and linearity is obtained in the range of 0.5 to 8 microg. A comparative study with high-performance liquid chromatography (HPLC) on a C18 column, applying the same mobile phase, proves the suitability of the TLC method, in which almost all presented analytes are separated from each other. In contrast, HPLC requires at least a 20-min analysis to chromatograph all of the compounds and only betaAM and AE are clearly separated from each other and from the other compounds.     

Hard-soft acid-base interactions of silylenes and germylenes

A detailed investigation of the electrophilic and nucleophilic character of singlet silylenes and germylenes, divalent compounds of silicon and germanium, respectively, substituted by first- and second-row elements is presented. In a first part, the Lewis acid properties of these compounds were studied through their complexation reaction with the Lewis bases NH3, PH3, and AsH3. The results indicate that this complexation is most favorable with the hardest base NH3, classifying these compounds as hard Lewis acids. This is confirmed by the linear correlation between the interaction energies and the value of the electrostatic potential, used as an approximation to the local hardness, near the empty p orbital of these compounds, indicating a charge-controlled interaction in the complex. Also the electrophilicity index, proposed by Parr et al., computed both at the global and the local level, correlates linearly with the complexation energies of the compounds with NH3. The Lewis base character of these silylenes has been investigated, through their interaction with the acids BH3 and AlH3. Also in this case, the electrostatic potential can be used to probe the reactivity of the compounds. It will finally be demonstrated that an increasing stability of the silylenes and germylenes is accompanied by an increase in their nucleophilicity and a decrease of the electrophilicity.     

Synthesis of the ABC ring system of manzamine A

A synthesis of the core ABC ring system of the manzamine alkaloids is described, starting from arecoline. The key steps involve a Claisen rearrangement to set up a 4-substituted-3-methylenepiperidine and a stereoselective azomethine ylide dipolar cycloaddition reaction. Condensation of the aldehyde 6 and sarcosine ethyl ester hydrochloride salt gives an intermediate azomethine ylide, which undergoes an intramolecular cycloaddition reaction to set up two new rings and three new chiral centers stereoselectively. The aldehyde 6 was not a suitable substrate for related azomethine ylide cycloaddition reactions with other amines. However, the related dimethyl acetal 26 could be condensed with a variety of amines to give the desired tricyclic products. The cycloaddition reaction with N-methyl or N-allyl glycine ethyl ester gave almost exclusively the exo adduct, whereas cycloaddition with glycine ethyl ester gave the endo adduct.     

Water adsorption in disordered mesoporous silica (Vycor) at 300 K and 650 K: a Grand Canonical Monte Carlo simulation study of hysteresis

This numerical simulation paper focuses on the adsorption/desorption of water in disordered mesoporous silica glasses (Vycor-like). The numerical adsorbent was previously obtained by off lattice method, and was shown to reproduce quite well the micro- and mesotextural properties of real Vycor, as well as morphological (pore size distribution) and topological (pore interconnections) disorder. The water-water interactions are described by the SPC model while water-silica interactions are calculated in the framework of the PN-TrAZ model. The water adsorption/desorption isotherms and the configurational energies are calculated by the Grand Canonical Monte Carlo simulation method. The low pressure results compare well with experiments, showing the good transferability of the intermolecular potential. It is shown that if the hysteresis loop observed in the adsorption/desorption isotherm is considered as a true phase transition (which is actually still an open question in the case of disordered porous materials), then it is possible to calculate the grand potential by applying the thermodynamic integration scheme. The grand potential is shown to be multivalued for low (subcritical) temperature, and continuous for high (supercritical) temperature. A coexistence point is found within the hysteresis loop, actually close to the vertical desorption line. Below the equilibrium chemical potential, the gaslike branch is stable whereas the liquidlike branch is metastable. The situation is reversed above the coexistence point.     

Reactions of alicyclic epoxy compounds with oxygen-centered nucleophiles

The review analyzes the reactions of alicyclic epoxy compounds with oxygen-containing nucleophiles (alcohols, water, and organic acids), describes biologically active products of these reactions, and discusses their mechanisms and results of their simulation by quantum-chemical methods. The regio-and stereoselectivity of nucleophilic reactions of epoxy compounds and the activation of epoxy ring by achiral and chiral catalysts are also considered.