A novel (4,6)‐connected double‐layered BaII coordination polymer based on the flexible tricarboxylate ligand 2,2′,2′′‐[1,3,5‐triazine‐2,4,6‐triyltris(sulfanediyl)]triacetic acid

In the title compound, poly[[triaqua{μ₄‐2‐[4,6‐bis(carboxymethylsulfanyl)‐1,3,5‐triazin‐2‐ylsulfanyl]acetato}{μ₂‐2‐[4,6‐bis(carboxymethylsulfanyl)‐1,3,5‐triazin‐2‐ylsulfanyl]acetato}barium(II)] monohydrate], {[Ba(C₉H₈N₃O₆S₃)₂(H₂O)₃]·H₂O}_n, each Ba^II atom is nine‐coordinated by six O atoms from carboxylate groups of four different 2‐[4,6‐bis(carboxymethylsulfanyl)‐1,3,5‐triazin‐2‐ylsulfanyl]acetate ligands and three O atoms from water molecules. The triazine ligand is partially deprotonated, as verified by intermolecular hydrogen‐bonding parameters, and adopts μ₂‐η¹:η¹ and μ₄‐η¹:η¹:η² coordination modes to connect the Ba^II centres, forming a novel double‐layered structure. Topological analysis indicates that the whole structure is a novel (4,6)‐connected net, considering the ligands and Ba^II centres as four‐ and six‐connected nodes, respectively.     

Photochemically prepared polysulfone/poly(ethylene glycol) amphiphilic networks and their biomolecule adsorption properties

Polysulfone/poly(ethylene glycol) amphiphilic networks were prepared via in situ photo-induced free radical crosslinking polymerization. First, the hydrophobic polysulfone diacrylate (PSU-DA) oligomer was synthesized by condensation polymerization and subsequent esterification processes. Then, the obtained oligomer was co-crosslinked with the hydrophilic poly(ethylene glycol) diacrylate (PEG-DA) or poly(ethylene glycol) methyl ether acrylate (PEG-MA) at different feed ratios. In the case of PEG-MA, the resulting network possessed dangling pendant hydrophilic chains on the crosslinked surface. The structure and the morphology of the membranes were characterized by attenuated total reflection infrared spectroscopy (ATR-IR) and scanning electron microscopy (SEM). The enhancement of surface hydrophilicity was investigated by water contact angle measurements. The biomolecule adsorption properties of these networks were also studied. The biomolecules easily adsorbed on the surface of the hydrophobic polysulfone networks whereas dangling hydrophilic chains on the surface prevented the adsorption of the biomolecules.     

A novel 9-MC-3 and 15-MC-6 onset stacked metallacrown single-molecule magnet: synthesis and crystal structure

A novel enneanuclear manganese complex, [Mn(9)O(4)(Mesao)(6)(MeO)(3)(O(2)CMe)(3)(OH)(MeOH)(2)]·2.5DMF [1; Me-saoH(2) = 2-hydroxyphenylethanone oxime], was synthesized. The structure of 1 contains an unusual [Mn(9)O(4)] core with an unprecedented defective "supertetrahedron" topology based on two parallel, onset stacked 9-MC-3 and 15-MC-6 metallacrown subunits. Magnetic studies indicate that 1 behaves as a single-molecule magnet.     

The usage of a bismuth film electrode as transducer in glucose biosensing

A second generation glucose biosensor was developed by using neutral red (NR) as a mediator and a bismuth film electrode (BiFE) as a transducer along with immobilized glucose oxidase. The linear range was between 0.2 and 2.5 mM, and a correlation coefficient of 0.999 was obtained with this electrode. The standard deviation (at 1 mM glucose for n = 4) and the coefficient of variation were calculated as ±8.07 μM and 3.4%, respectively. The biosensor was used for the determination of glucose in wine samples. Correspondence: ülkü Anık, Chemistry Department, Faculty of Arts and Science, Mugla University, TR-48000-K?tekli, Mugla, Turkey     

A new ginsengenin containing an oxacyclopentane-ring isolated from the acid hydrolysate of total ginsenosides

Bioassay-guided fractionation of the acid hydrolysate of total ginsenosides of Panax ginseng C.A.Meyer （Araliaceae） led to the isolation of a novel ginsengenin（1）.The structure of 1 was determined as （20S,22S）-dammar-22,25-epoxy-3β,12β,20-triol by extensive spectroscopy and single-crystal X-ray diffraction analyses.The cytotoxicity of 1 was further tested against SWl 116,HCTl 16,and A549 cells by the MTT method,with IC₅₀ values in the range of 2.96-30.9μmol/L.     

Sensor Platform with a Custom‐tailored Aptamer for Diagnosis of Synthetic Cannabinoids

Synthetic cannabinoids (SCs) are the large group of abused drugs and detection of them is still a challenge. Hence, new methods for analysis of SCs are being investigated. We aimed to develop a novel system for selective analysis of SCs. First, various custom‐tailored aptamers against the target SCs were selected through GO‐SELEX process. Toggling between different SC analytes during successive rounds of selection was performed to generate cross‐reactive aptamers. Then, the amino‐capped aptamers were synthesized and easily attached to the cysteamine‐covered gold electrodes. Analytical parameters and selectivity of the aptasensors were compared by using electrochemical techniques. After comparison of the analytical features and selectivity towards target analytes, one of the aptamers designated as Apta‐1 was chosen for further measurements. The aptasensor was tested by using differential pulse voltammetry technique against JWH‐018 (5‐pentanoic acid), selected as a model for SCs. The linearity and limit of detection were determined as 0.01–1.0 ng/mL and 0.036 ng/mL. Finally, sample application in synthetic urine samples was successfully performed with standard addition method, as confirmed by LC‐QTOF/MS. JWH‐018 (4‐hydroxypentyl), JWH‐073 (3‐hydroxybutyl), JWH‐250 (5‐hidroxypentyl) and HU‐210 were used to test the selectivity of the aptasensor and the system was shown to recognize all these SCs. Also other illegal drugs did not significantly interfere with the signal responses.     

Self‐assembly of a cobalt(II)‐based metal–organic framework as an effective water‐splitting heterogeneous catalyst for light‐driven hydrogen production

The solar photocatalysis of water splitting represents a significant branch of enzymatic simulation by efficient chemical conversion and the generation of hydrogen as green energy provides a feasible way for the replacement of fossil fuels to solve energy and environmental issues. We report herein the self‐assembly of a Co^II‐based metal–organic framework (MOF) constructed from 4,4′,4′′,4′′′‐(ethene‐1,1,2,2‐tetrayl)tetrabenzoic acid [or tetrakis(4‐carboxyphenyl)ethylene, H₄TCPE] and 4,4′‐bipyridyl (bpy) as four‐point‐ and two‐point‐connected nodes, respectively. This material, namely, poly[(μ‐4,4′‐bipyridyl)[μ₈‐4,4′,4′′,4′′′‐(ethene‐1,1,2,2‐tetrayl)tetrabenzoato]cobalt(II)], [Co(C₃₀H₁₆O₈)(C₁₀H₈N₂)]_n, crystallized as dark‐red block‐shaped crystals with high crystallinity and was fully characterized by single‐crystal X‐ray diffraction, PXRD, IR, solid‐state UV–Vis and cyclic voltammetry (CV) measurements. The redox‐active Co^II atoms in the structure could be used as the catalytic sites for hydrogen production via water splitting. The application of this new MOF as a heterogeneous catalyst for light‐driven H₂ production has been explored in a three‐component system with fluorescein as photosensitizer and trimethylamine as the sacrificial electron donor, and the initial volume of H₂ production is about 360 µmol after 12 h irradiation.     

Interaction Between 1-Dodecyl-3-Methylimidazolium Bromide and Sodium Carboxymethylcellulose in Aqueous Solution: Effect of Polymer Concentration

Effect of the concentration of water-soluble polyanion (sodium carboxymethylcellulose, NaCMC) on the interaction between a cationic surfactant (1-dodecyl-3-methylimidazolium bromide, C₁₂mimBr) and NaCMC in aqueous solution has been studied by isothermal titration microcalorimetry (ITC), conductivity, surface tension, and rheological measurements. From the surfactant/polymer interacting enthalpy, it can be deduced that the electrostatic attraction between the cationic surfactant and anionic polyelectrolyte causes an endothermic process, and the C₁₂mimBr monomers binding to the NaCMC chains to form micelle-like aggregates through hydrophobic interaction is an exothermic process. Increasing the NaCMC concentration causes the interaction between C₁₂mimBr and NaCMC to decrease, and the characteristic surfactant concentrations, including the critical aggregation surfactant concentration (CAC), the surfactant concentration to form free micelles (C_m), and the saturation concentration of surfactant on the NaCMC chains (C_S) to increase. Because of the strong electrostatic interaction between C₁₂mimBr and NaCMC, the formation of C₁₂mimBr/NaCMC complexes can lead to precipitation or redissolution depending on solution composition, so the critical precipitation concentration (C_P) and the onset of a redissolution concentration (C_R) has been determined by the electrical conductivity. The rheological results reveal a dramatic increase in solution viscosity around the CAC, attributed to interpolymer cross-linking through the formation of mixed micelles involving the carboxylic acid groups of NaCMC and the surfactant.     

Quinoxaline‐based D‐A conjugated polymers for organic solar cells: Probing the effect of quinoxaline side chains and fluorine substitution on the power conversion efficiency

We describe the successful synthesis of four novel donor‐acceptor (D‐A) type copolymers, referred to as PQxBT , PQxFBT , TQxBT , and TQxFBT . The effects of using a fluorinated bithiophene (FBT) and varying the side‐chain moieties tethered to the quinoxaline (Qx) unit (electron‐withdrawing group in the polymer backbone) on the physical properties and photovoltaic performance were investigated. Specifically, the four polymers were synthesized using either alkoxyphenyl (P) or alkylthiophene (T) units anchored to the quinoxaline in the polymer backbone. The FBT‐bearing polymers, PQxFBT and TQxFBT , displayed more redshifted absorption spectra and higher crystallinity owing to the greater planarity of their polymer backbone as compared to the non‐fluorinated polymers. The TQxFBT copolymer, equipped with both the alkylthiophene side chains and FBT, exhibited face‐on orientation in film state and a well‐mixed nanophase morphology in TQxFBT :PC₇₁BM blend films. The photovoltaic device fabricated from TQxFBT :PC₇₁BM exhibited the highest power conversion efficiency of 4.18%. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 55, 1209–1218