Photosensitized Generation of Singlet Oxygen from (Substituted Bipyridine)ruthenium(II) Complexes

Photophysical properties in dilute MeCN solution are reported for seven Ru^II complexes containing two 2,2′‐bipyridine (bpy) ligands and different third ligands, six of which contain a variety of 4,4′‐carboxamide‐disubstituted 2,2′‐bipyridines, for one complex containing no 2,2′‐bipyridine, but 2 of these different ligands, for three multinuclear Ru^II complexes containing 2 or 4 [Ru(bpy)₂] moieties and also coordinated via 4,4′‐carboxamide‐disubstituted 2,2′‐bipyridine ligands, and for the complex [(Ru(bpy)₂(L)]²⁺ where L is N,N′‐([2,2′‐bipyridine]‐4,4′‐diyl)bis[3‐methoxypropanamide]. Absorption maxima are red‐shifted with respect to [Ru(bpy)₃]²⁺, as are phosphorescence maxima which vary from 622 to 656 nm. The lifetimes of the lowest excited triplet metal‐to‐ligand charge transfer states ³MLCT in de‐aerated MeCN are equal to or longer than for [Ru(bpy)₃]²⁺ and vary considerably, i.e., from 0.86 to 1.71 μs. Rate constants k_q for quenching by O₂ of the ³MLCT states were measured and found to be well below diffusion‐controlled, ranging from 1.2 to 2.0⋅10⁹ dm³ mol⁻¹ s⁻¹. The efficiencies f of singlet‐oxygen formation during oxygen quenching of these ³MLCT states are relatively high, namely 0.53 – 0.89. The product of k_q and f gives the net rate constant k for quenching due to energy transfer to produce singlet oxygen, and k_q−k equals k, the net rate constant for quenching due to energy dissipation of the excited ³MLCT states without energy transfer. The quenching rate constants were both found to correlate with ΔG^CT, the free‐energy change for charge transfer from the excited Ru complex to oxygen, and the relative and absolute values of these rate constants are discussed.     

The determination of arsenic and selenium in coal by continuous flow hydride-generation atomic absorption spectrometry and atomic fluorescence spectrometry

Concentrated perchloric acid is used to digest coal for subsequent determination of arsenic and selenium by hydride-generation atomic absorption and fluorescence spectrometry. Arsenic and selenium are removed from potentially interfering metal ions by coprecipitation with lanthanum hydroxide. The detection limits, 58 and 36 ng g^?1 by atomic absorption and 25 and 10 ng g^?1 by atomic fluorescence, for arsenic and selenium in coal, respectively, are adequate for the normal levels of these metals.     

The extraordinary ability of guanidinate derivatives to stabilize higher oxidation numbers in dimetal units by modification of redox potentials: structures of Mo(2)(5+) and Mo(2)(6+) compounds

Full characterization of the first homologous series of dimolybdenum paddlewheel compounds having electronic configurations of the types sigma(2)pi(4)delta(x), x = 2, 1, 0, and Mo-Mo bond orders of 4, 3.5, and 3, respectively, has been accomplished with the guanidinate-type ligand hpp (hpp = the anion of 1,3,4,6,7,8-hexahydro-2H-pyrimido[1,2-a]pyrimidine). Essentially quantitative oxidation of Mo(2)(hpp)(4), 1, by CH(2)Cl(2) gives Mo(2)(hpp)(4)Cl, 2. The halide in 2 can be replaced by reaction with TlBF(4) to produce Mo(2)(hpp)(4)(BF(4)), 3. Further oxidation of 2 by AgBF(4) produces Mo(2)(hpp)(4)ClBF(4), 4. The change from bond order 4 (in 1) to 3.5 in Mo(2)(hpp)(4)Cl is accompanied by an increase in the Mo-Mo bond length of 0.061 to 2.1280(4) A. A further increase of 0.044 A in the Mo-Mo distance to 2.172(1) A is observed as the bond order decreases to 3 in 4. At the same time, the Mo-N distances decrease smoothly as the oxidation state of the Mo atoms increases. Electrochemical studies have shown two chemically reversible processes at very negative potentials, E(1)(1/2)= -0.444 V and E(2)(1/2)= -1.271 V versus Ag/AgCl. These correspond to the processes Mo(2)(6+/5+) and Mo(2)(5+/4+), respectively. The latter potential is displaced by over 1.5 V relative to those of the Mo(2)(formamidinate)(4) compounds and the first one has never been observed in such complexes. Thus, in surprising contrast to previously observed behavior of the dimolybdenum unit, when it is surrounded by the very basic guanidinate ligand hpp, there is an extraordinary stabilization of the higher oxidation numbers of the molybdenum atoms.     

Tobacco protein separation by aqueous two-phase extraction

Tobacco has long been considered as a host to produce large quantity of high-valued recombinant proteins. However, dealing with large quantities of biomass is a challenge for downstream processing. Aqueous two-phase extraction (ATPE) has been widely used in purifying proteins from various sources. It is a protein-friendly process and can be scaled up easily. In this paper, ATPE was studied for its applicability to recombinant protein purification from tobacco with egg white lysozyme as the model protein. Separate experiments with poly(ethylene glycol) (PEG)-salt-tobacco extract and PEG-salt-lysozyme were carried out to determine the partition behavior of tobacco protein and lysozyme, respectively. Two-level fractional factorial designs were used to study the effects of factors such as, PEG molecular mass, PEG concentration, the concentration of phase forming salt, sodium chloride concentration and pH, on protein partitioning. The results showed that, among the studied systems, PEG-sodium sulfate system was most suitable for lysozyme purification. Detailed experiments were conducted by spiking lysozyme into the tobacco extract. The conditions with highest selectivity of lysozyme over native tobacco protein were determined using a response surface design. The purification factor was further improved by decreasing the phase ratio along the tie line corresponding to the phase compositions with the highest selectivity. Under selected conditions the lysozyme yield was predicted to be 87% with a purification factor of 4 and concentration factor of 14. From this study, ATPE was shown to be suitable for initial protein recovery and partial purification from transgenic tobacco.     

Formation of nitrogen‐containing heterocycles using di(imidazole‐1‐yl)methanimine

A mild and efficient synthesis of five‐ and six‐membered nitrogen containing heterocyclic compounds, in which di(imidazole‐1‐yl)methanimine serves as a one‐carbon source, is reported.     

Skipping in a hybrid polyketide synthase. Evidence for ACP-to-ACP chain transfer

A tetraketide synthase containing a loading module (LM), the extension modules erythromycin module 1, rapamycin module 2, and erythromycin module 2 (LM-Ery1-Rap2-Ery2-TE), when expressed in Saccharopolyspora erythraea strain JC2, produced as previously reported a mixture of tetraketide lactones (minor products) and triketide lactones (major products). Several alternative plausible mechanisms by which this "skipping" phenomenon might occur may be proposed. Site-directed mutagenesis of the ketosynthase (KS) and acylcarrier protein (ACP) domains in the interpolated module has shown that skipping within the hybrid PKS involves passage of the growing polyketide through the interpolated module, by direct ACP-to-ACP transfer of the polyketide chain.     

ToxML,a data exchange standard with content controlled vocabulary used to build better (Q)SAR models

Development of accurate quantitative structure–activity relationship (QSAR) models requires the availability of high quality validated data. International regulations such as REACH in Europe will now accept (Q)SAR-based evaluations for risk assessment. The number of toxicity datasets available for those wishing to share knowledge, or to use for data mining and modelling, is continually expanding. The challenge is the current use of a multitude of different data formats. The issues of comparing or combining disparate data apply both to public and proprietary sources. The ToxML project addresses the need for a common data exchange standard that allows the representation and communication of these data in a well-structured electronic format. It is an open standard based on Extensible Markup Language (XML). Supporting information for overall toxicity endpoint data can be included within ToxML files. This makes it possible to assess the quality and detail of the data used in a model. The data file model allows the aggregation of experimental data to the compound level in the detail needed to support (Q)SAR work. The standard is published on a website together with tools to view, edit and download it.     

Loss of co-linearity by modular polyketide synthases: a mechanism for the evolution of chemical diversity

Modular polyketide synthases biosynthesise natural products through successive Claisen-type condensations, where one module is responsible for one round of chain extension. This review describes recent findings where this rule of co-linearity is broken, either by one module being bypassed (skipping) or through one module being used for multiple chain extension events (stuttering).     

The permeation liquid membrane as a sensor for free nickel in aqueous samples

There are currently a limited number of techniques to study nickel speciation in aqueous samples. This work reports on the use of the permeation liquid membrane (PLM) for that objective. In this paper, the composition of the organic phase was studied to maximize the Ni flux (thus the sensitivity of the device) over a wide Ni2+ concentration range (50 nM to 100 microM) in order to verify its ability to determine free Ni2+ in the presence of Ni complexes. A mixture containing 1,10-didecyl-1,10-diaza-18-crown-6 ether (22DD) and di(2-ethylhexyl)phosphoric acid (D2EHPA) in toluene/phenylhexane was selected as the optimized organic phase for the PLM. The PLM was shown to be a reliable tool to measure free nickel concentrations down to 10(-7) M. The effect of pH on Ni transport was also studied. Fluxes below pH 6 were reduced significantly, i.e. an order of magnitude smaller than fluxes above pH 7.8. Finally, as part of a broader study examining the ability of trace metals to induce antibiotic resistance in bacteria, we used the PLM to quantify the formation, at pH = 7.2, of a weak complex between Ni and Imipenem (a member of the carbapenem class of beta-lactam antibiotics) or its hydrolysis product(s).