A more convenient and general procedure for O-monobenzylation of diols via stannylenes: a critical reevaluation of the Bu2SnO method

A more consistent, straightforward, and economical protocol for generation of stannylene species and their reaction with BnBr leading to products of O-monobenzylation of diols has been set. It has shown to be specially indicated for substrates bearing vicinal trans 1,2-diol moieties on cyclohexane backbones, which are more resistant to these transformations. Such protocol has been successfully applied to myo-inositol derivatives and acyclic diols.     

X-ray diffraction and solid-state NMR studies of a germanium binuclear complex

A compound formulated as (C4H12N2)[Ge2(pmida)2(OH)2] x 4 H2O (where pmida(4-) = N-(phosphonomethyl)iminodiacetate and C4H12N2(2+) = piperazinedium cation), containing the anionic [Ge2(pmida)2(OH)2]2- complex, has been synthesised by the hydrothermal approach and its structure determined by single-crystal X-ray diffraction analysis. Several high-resolution solid-state magic-angle spinning (MAS) NMR techniques, in particular two-dimensional 1H-X(13C,31P) heteronuclear correlation (HETCOR) and 1H-1H homonuclear correlation (HOMCOR) experiments incorporating a frequency-switched Lee-Goldburg (FS-LG) decoupling scheme, have been employed for the first time in such a material. Using these tools in tandem affords an excellent general approach to study the structure of other inorganic-organic hybrids. We assigned the NMR resonances with the help of C...H and P...H internuclear distances obtained through systematic statistical analyses of the crystallographic data. The compound was further characterised by powder X-ray diffraction techniques, IR and Raman spectroscopy, and by elemental and thermal analyses (thermogravimetric analysis and differential scanning calorimetry).     

A new production method for carrier-free201Tl using IEN'S cyclotron in Rio De Janeiro

A new and simplified method was developed for the separation of thallium 201 which will allow the shipment of a “one shot generator” to distant places and easy elution at the destination. Thallium is produced as usually, through the reaction $${}^{nat}Tl/p,xn/^{201} pb\xrightarrow{{\beta ^ + }}{}^{201}Tl$$ with 24-MeV protons from IEN'S CV-28 cyclotron. The separation is based on the properties of a chelating carboxylic acid cation exchange resin column which at pH 4.5 retains lead while thallim is easily eluted. This column can also be used as a regular generator to produced greater quantities of²⁰¹Tl but at the expense of more elutions.     

Absolute rate calculations: atom and proton transfers in hydrogen-bonded systems.

We calculate energy barriers of atom- and proton-transfer reactions in hydrogen-bonded complexes in the gas phase. Our calculations do not involve adjustable parameters and are based on bond-dissociation energies, ionization potentials, electron affinities, bond lengths, and vibration frequencies of the reactive bonds. The calculated barriers are in agreement with experimental data and high-level ab initio calculations. We relate the height of the barrier with the molecular properties of the reactants and complexes. The structure of complexes with strong hydrogen bonds approaches that of the transition state, and substantially reduces the barrier height. We calculate the hydrogen-abstraction rates in H-bonded systems using the transition-state theory with the semiclassical correction for tunneling, and show that they are in excellent agreement with the experimental data. H-bonding leads to an increase in tunneling corrections at room temperature.     

Thin-Layer Chromatography with an Isolated Support and Forced Flow of the Mobile Phase

JPC – Journal of Planar Chromatography – Modern TLC -     

Stereoselective Rh-catalyzed hydrogenation of cyclobutyl chiral enamides: double stereodifferentiation vs catalyst-controlled diastereoselection

The hydrogenation reactions of several cyclobutyl enamides derived from (-)-alpha-pinene or (-)-verbenone have been investigated by using different catalysts. The chiralities of both the substrate and the catalyst as well as the Z/E stereochemistry of the double bond have been considered, and the observed diastereoselectivity has been rationalized. For enamides with the double bond separated from the cyclobutane by a methylene, the Wilkinson catalyst did not induce any diastereoselection, but excellent diastereoselectivity was observed when using Et-DuPHOS-Rh and ChiraPHOS-Rh. The configuration of the new stereogenic center was catalyst-dependent and can be rationalized according to the Halpern mechanism. For (Z)-enamides with the double bond directly linked to the cyclobutane ring, the chirality of the substrate governed the diastereoselection and the Halpern mechanism seemed not to be operative in the hydrogenation with ChiraPHOS, with the configuration of the new stereogenic center being determined by steric effects. On the contrary, the chirality of the catalyst was the factor determining the stereochemistry of the major products with alkyl-DuPHOS-Rh. Z/E stereochemistry influenced the stereodifferentiation, and a different behavior for each Z or E stereoisomer was found. For both (Z)- and (E)-enamides, some instances of match/mismatch between the chirality of the substrate and that of the catalyst were observed. As a result of all of these studies, a series of new cyclobutyl alpha-amino acids has been synthesized. These products are interesting to incorporate into conformationally constrained peptides.     

Radionuclides in a sediment trap and bottom sediment samples from the eastern Turkish coast of the Black Sea

Summary Radionuclide (¹³⁷Cs, ²³⁸U, ²³²Th and ⁴⁰K) concentrations were determined in a sediment trap and bottom sediment samples collected from a station at the eastern Turkish coast of the Black Sea. The specific activity of the ¹³⁷Cs radionuclide in the settling particles ranged from 0.04±0.01 to 0.10±0.02 Bq^. g^-1dry weight. The calculated flux rate of the ¹³⁷Cs was between 0.37 and 2.59 Bq^. m^-2. d^-1in the sampling periods of 2002 and 2003. The ¹³⁷Cs concentration in the bottom sediment profile were between 0.039±0.013-9.083±0.017 Bq^. g^-1dry weight in the same station. The vertical profile of the radionuclides suggests that they have little mobility during the 17 years after the Chernobyl accident.     

Nickel determination in osteoblast-like cell culture medium by adsorptive cathodic stripping voltammetry with a mercury microelectrode

The purpose of this study is to investigate the influence of nickel, which is an alloying element in commonly used metallic biomaterials, on the biomaterials mineralization process. An electrochemical method was developed to quantify this metal ion in osteoblast-like cell culture medium (OST) by performing adsorptive cathodic stripping voltammetry (CSV) with dimethylglyoxime (DMG) at a mercury film microelectrode (MFM). The optimized analytical conditions and the square-wave CSV parameters for the analysis are: DMG concentration: 5.00 × 10⁻⁴ mol L⁻¹; ammonium chloride buffer: 0.10 mol L⁻¹ (pH 9.2); frequency: 50 Hz, amplitude 20 mV; step: 2 mV; adsorption time: 10 s, deposition potential: −0.70 V and reduction potential: −1.20 V. The limit of detection was 7.70 × 10⁻⁹ mol L⁻¹ for an adsorption time of 10 s. The results achieved by CSV using the MFM were compared to those obtained by atomic absorption spectrometry (AAS) to ensure the reliability of the electrochemical method. The mineralization process was evaluated by biochemical and histochemical assays.     

Determination of copper in medicinal plants used as dietary supplements by atomic absorption spectrometry with direct flame solid analysis

An alternative device for the direct solid analysis (DSA) for copper determination by flame atomic absorption spectrometry (FAAS) is proposed. Copper was directly determined in commercial medicinal plants used as dietary supplements. The determination of copper in solid samples by DSA–FAAS was made by using a conventional air–acetylene flame. Between 0.05 and 1.5 mg of each test, sample was weighed directly into a small polyethylene vial connected to the device used for solid introduction into the flame. Test samples were introduced into the flame as a dry aerosol using a T-quartz cell set between the burner and the optical path. The T-quartz cell has a slit in the superior part by which the solid aerosol passes to the flame. A transient signal, evaluated as integrated absorbance, is produced and it is totally integrated in 2 s. Background signals always presented absorbance values less than 0.1. It was found a characteristic mass of 0.8 ng Cu and absolute limit of detection of 1.2 ng (3 s), or 1.2 μg g⁻¹ if a sample mass of 1 mg was used. Optimized conditions for air flow rate, flame stoichiometry, and so on were established as well. No excessive grinding of the samples was needed and samples with particle of size less than 80 μm were used throughout. No statistical difference between the results from the proposed system and those obtained by sample digestion and determination by conventional FAAS was observed. With the proposed procedure, more than 50 test samples can be analyzed in 1 h and it can be easily adapted to conventional spectrometers for FAAS.