Faraday rotation of microwave fields in an electron cyclotronresonance plasma

An electron cyclotron resonance (ECR) plasma is created with 2.45-GHz linearly polarized microwaves, which propagate in the direction of the magnetic field. Measurements of the relative power and polarization angle versus z have been made within the first few centimeters of the quartz entry window. As the microwave electric field enters the plasma, it rotates while becoming elliptically polarized then circularly polarized. The rotation angle versus z and the component of the microwave field along the major axis of the polarization ellipse versus z are explained by cold plasma dispersion theory     

The electric field gradient at the iron sites inβFeOOH

The temperature behaviour of the hyperfine parameters of iron in paramagnetic chlorine containingΒFeOOH is studied by⁵⁷Fe Mössbauer spectroscopy. Applying external magnetic fields, the sign and asymmetry parameterη of the electric field gradient (EFG) at the compound's two iron sites is determined. It is shown that an external field enhances the distributive character of the hyperfine parameters. Finally, heat treatment experiments allow new data on the nature of both iron coordination types to be presented.     

Preparation of TiO2 nano-particle photocatalysts by a multi-gelation method: the effect of pH change

TiO₂ photocatalysts were prepared by a multi-gelation method and the effect of the changes in the pH during the pH swing times, i.e., by a controlled pH swing, on the morphology of the TiO₂ particles was investigated. The photocatalytic properties of the TiO₂ catalysts prepared by controlled pH swing were compared with TiO₂ particles prepared without adjusting the pH during the swing times. The photocatalytic degradation reaction of these TiO₂ catalysts was investigated by comparing their effectiveness in 2-propanol oxidation. The experimental results showed that the TiO₂ photocatalysts prepared without adjusting the pH performed better in controlling the important parameters of the catalysts such as particle size, surface area, anatase/rutile phase ratio and pore size, as well as pore volume than the TiO₂ photocatalysts prepared by a controlled pH swing method. Deceased.     

Characterisation of estrone-nucleic acid adducts formed by reaction of 3,4-estrone-o-quinone with 2'-deoxynucleosides/deoxynucleotides using capillary liquid chromatography/electrospray ionization mass spectrometry

Xenobiotic and endobiotic molecules can react with DNA leading to formation of so-called DNA adducts. This modified DNA can be repaired enzymatically, but, if not, these modifications are believed to be responsible for the initiation of carcinogenic processes. Hence, we studied the interaction of 2'-deoxynucleosides and 2'-deoxynucleotides with 3,4-estronequinone (3,4-E(1)Q), a metabolite of estrone (E(1)) and a supposed carcinogen. These estrone-nucleic acid adducts were analysed by capillary liquid chromatography (CapLC) coupled to electrospray ionization mass spectrometry (ESI-MS). Knowledge of their behaviour from in vitro studies is a prerequisite for detecting adducts in in vivo studies. Our initial attempts to synthesise nucleos(t)ide adducts of 3,4-E(1)Q in an aprotic solvent (dimethylformamide) yielded no adducts. However, under acidic aqueous conditions, adducts were obtained. With dGuo, a dGuo adduct was found in addition to a Gua adduct. Earlier publications on adduct formation in protic solvents failed to report formation of any adduct with dAdo. A N(3)-Ade adduct was reported upon reaction of 3,4-E(1)Q with Ade base and with DNA. With dAdo, we obtained two nucleoside adducts and six Ade adducts due to loss of 2'-deoxyribose. Thus, contrary to general belief that only 2,3-E(1)Q can form stable adducts, we showed formation of substantial amounts of intact DNA adducts with 3,4-E(1)Q in addition to deglycosylated adducts. Adducts were also obtained with dGMP and dAMP, but no phosphate alkylation was found. Adducts of dCyd, dCMP, dThd, and dTMP were not detected. Using chromatographic-MS data a structural relationship between the 2'-deoxynucleoside, 2'-deoxynucleotide and base adducts was found in the various reaction mixtures. The adducts of dGuo and dGMP reaction mixtures were alkylated at the same N(7)-position of the nucleobase, as indicated by the occurrence of a rapid deglycosylation reaction. In dAdo and dAMP reaction mixtures, 14 adducts were detected; their relationships from the LC and MS data reduced the number of structures to six adenine base alkylated adducts with respect to alkylation between N(1), N(3), N(7) and/or N(6) in the adenine and C(1), C(2) and/or C(6) in 3,4-E(1)Q. We could infer, in addition, whether they had an A ring attachment or a C(6) attachment on the estrone moiety.     

A combined LC-MS/MS and LC-MS3 multi-method for the quantification of iodothyronines in human blood serum

We report here a novel approach for the extraction and analysis of thyroid hormones (TH) and their metabolites (THM) from human serum samples. Our method features a compact, 96-well micro-titre plate-based pre-analytic extraction/clean-up workflow combined with an isotope dilution LC-MS/MS-MS³ analytical method. In particular, these features make possible the detection of iodothyronines at their endogenous concentrations in serum differing by a factor of ca. 10⁴, with potential to semi-automate the pre-analytics. The method was validated by the assessment of linearity, lower limits of quantification and detection (LLOQ and LLOD respectively), intra- and inter-day accuracy, precision, process efficiency (PE), matrix effect (ME) and relative recovery (RE). Calibration curves were linear in the concentration range in sample matrix from 0.1–250 nM for T₃, rT₃, T₄ and 3-T₁AM and from 0.005–1 nM for 3,5-T₂ and 3,3′-T₂. Using a 200-μL sample volume, the analyte dependant LLOQ were in the range 0.005 (3,5-T₂) to 0.25 (T₄) nM and LLOD were between 0.002 (3,5-T₂) and 0.052 nM (T₄). We applied the LC-MS/MS-MS³ method to the analysis of a cross section of patients with disorders of the thyroid hormone axis. T₄, T₃ and rT₃ concentrations (± standard deviation) were 120 ± 18, 1.9 ± 0.4 and 0.45 ± 0.09 nM respectively. 3,3′-T₂ concentrations (± standard deviation) were 0.079 ± 0.022 nM; 3,5-T₂ concentrations were below the LLOQ and/or LLOD in all but a single sample (0.013 nM). This method expands the analytical spectrum to endogenous thyroid hormone metabolites such as 3,5-T₂ which exert biological actions and rT₃ which may act as surrogate markers for disturbed thyroid hormone metabolism.

Graphical abstract

     

Chiral relay in NHC-mediated asymmetric β-lactam synthesis II; asymmetry from NHCs derived from acyclic 1,2-diamines

The synthesis of a range of imidazolinium salts derived from acyclic 1,2-diamines, and an evaluation of the reactivity and asymmetric induction of the corresponding NHCs as catalysts for the asymmetric synthesis of β-lactams, is reported. An N-methyl-substituted NHC derived from (1R,2R)-1,2-diphenylethanediamine shows optimal reactivity and enantioselectivity in this series, in contrast to that observed with NHCs derived from (1R,2R)-cyclohexane-1,2-diamine.     

Electron beam accelerators—trends in radiation processing technology for industrial and environmental applications in Latin America and the Caribbean

The radiation processing technology for industrial and environmental applications has been developed and used worldwide. In Latin America and the Caribbean and particularly in Brazil there are 24 and 16 industrial electron beam accelerators (EBA) respectively with energy from 200 keV to 10 MeV, operating in private companies and governmental institutions to enhance the physical and chemical properties of materials. However, there are more than 1500 high-current electron beam accelerators in commercial use throughout the world. The major needs and end-use markets for these electron beam (EB) units are R and D, wire and electric cables, heat shrinkable tubes and films, PE foams, tires, components, semiconductors and multilayer packaging films. Nowadays, the emerging opportunities in Latin America and the Caribbean are paints, adhesives and coatings cure in order to eliminate VOCs and for less energy use than thermal process; disinfestations of seeds; and films and multilayer packaging irradiation. For low-energy EBA (from 150 keV to 300 keV). For mid-energy EBA (from 300 keV to 5 MeV), they are flue gas treatment (SO₂ and NO_X removal); composite and nanocomposite materials; biodegradable composites based on biorenewable resources; human tissue sterilization; carbon and silicon carbide fibers irradiation; irradiated grafting ion-exchange membranes for fuel cells application; electrocatalysts nanoparticles production; and natural polymers irradiation and biodegradable blends production. For high-energy EBA (from 5 MeV to 10 MeV), they are sterilization of medical, pharmaceutical and biological products; gemstone enhancement; treatment of industrial and domestic effluents and sludge; preservation and disinfestations of foods and agricultural products; soil disinfestations; lignocellulosic material irradiation as a pretreatment to produce ethanol biofuel; decontamination of pesticide packing; solid residues remediation; organic compounds removal from wastewater; and treatment of effluent from petroleum production units and liquid irradiation process to treat vessel water ballast. On the other hand, there is a growing need of mobile EB facilities for different applications in South America.     

Finite quotients of groups of I-type

To every group of I-type, we associate a finite quotient group that plays the role that Coxeter groups play for Artin–Tits groups. Since groups of I-type are examples of Garside groups, this answers a question of D. Bessis in the particular case of groups of I-type. Groups of I-type are related to finite set-theoretical solutions of the Yang–Baxter equation. So, our result provides a new tool to attack the problem of the classification of finite set-theoretical solutions of the Yang–Baxter equation.