Optical control of coherent interactions between electron spins in InGaAs quantum dots

Coherent interactions between spins in quantum dots are a key requirement for quantum gates. We have performed pump-probe experiments in which pulsed lasers emitting at different photon energies manipulate two distinct subsets of electron spins within an inhomogeneous InGaAs quantum dot ensemble. The spin dynamics are monitored through their precession about an external magnetic field. These measurements demonstrate spin precession phase shifts and modulations of the magnitude of one subset of oriented spins after optical orientation of the second subset. The observations are consistent with results from a model using a Heisenberg-like interaction with μeV strength.     

Saturation of the magnetic response of split-ring resonators at optical frequencies

We investigate numerically the limits of the resonant magnetic response with a negative effective permeability mu(eff) for single-ring multicut split-ring resonator (SRR) designs up to optical frequencies. We find the breakdown of linear scaling due to the free electron kinetic energy for frequencies above approximately 100 THz. Above the linear scaling regime, the resonance frequency saturates, while the amplitude of the resonant permeability decreases, ultimately ceasing to reach negative value. The highest resonance frequency at which mu(eff) < 0 increases with the number of cuts in the SRR. A LC circuit model provides explanation of the numerical data.     

Acoustic excitations in a self-assembled block copolymer photonic crystal

High resolution Brillouin light scattering can sensitively detect acoustic phonons in concentrated solutions of a high molecular weight poly(styrene-b-isoprene) symmetric copolymer in toluene. This block copolymer lamellar forming system also possesses a photonic stop band in the visible spectrum. Based on the low but finite contrast in mechanical properties between the styrene and isoprene components and taking into account the geometrical characteristics of the layered microstructure, we calculate the acoustic band structure and represent the observed acousticlike and opticlike phonons.     

Structural and dynamical analysis of monodisperse and polydisperse colloidal systems

We present a semigrand ensemble Monte Carlo and Brownian dynamics simulation study of structural and dynamical properties of polydisperse soft spheres interacting via purely repulsive power-law potentials with a varying degree of "softness." Comparisons focus on crystal and amorphous phases at their coexistence points. It is shown through detailed structural analysis that as potential interactions soften, the "quality of crystallinity" of both monodisperse and polydisperse systems deteriorates. In general, polydisperse crystalline phases are characterized by a more ordered structure than the corresponding monodisperse ones (i.e., for the same potential softness). This counter-intuitive feature originates partly from the fact that particles of different sizes may be accommodated more flexibly in a crystal structure and from the reality that coexistence (osmotic) pressure is substantially higher for polydisperse systems. These trends diminish for softer potentials. Potential softness eventually produces substitutionally disordered crystals. However, substitutional order is apparent for the hard-spherelike interactions. Diffusionwise, crystals appear quite robust with a slight difference in the vibrational amplitudes of small and large particles. This difference, again, diminishes with potential softness. Overcrowding in amorphous polydisperse suspensions causes "delayed" diffusion at intermediate times.     

A study of bismuth-film electrodes for the detection of trace metals by anodic stripping voltammetry and their application to the determination of Pb and Zn in tapwater and human hair

This work reports the simultaneous determination of Cd(II), Pb(II) and Zn(II) at the low μg l⁻¹ concentration levels by square wave anodic stripping voltammetry (SWASV) on a bismuth-film electrode (BFE) plated in situ. The metal ions and bismuth were simultaneously deposited by reduction at −1.4 V on a rotating glassy carbon disk electrode. Then, the preconcentrated metals were oxidised by scanning the potential of the electrode from −1.4 to 0 V using a square-wave waveform. The stripping current arising from the oxidation of each metal was related to the concentration of each metal in the sample. The parameters for the simultaneous determination of the three metals were investigated with the view to apply this type of voltammetric sensor to real samples containing low concentrations of metals. Using the selected conditions, the limits of detection were 0.2 μg l⁻¹ for Cd and for Pb and 0.7 μg l⁻¹ for Zn at a preconcentration time of 10 min. Finally, BFE's were successfully applied to the determination of Pb and Zn in tapwater and human hair and the results were in satisfactory statistical agreement with atomic absorption spectroscopy (AAS).     

Disposable mercury-free cell-on-a-chip devices with integrated microfabricated electrodes for the determination of trace nickel(II) by adsorptive stripping voltammetry

This work reports the fabrication of disposable three-electrode cells with integrated sputtered metal-film electrodes. The working electrode was a bismuth-film electrode (BiFE) while the reference and counter electrodes were made of Ag and Pt, respectively. The deposition of the metal layers was carried out by sputtering of the respective metals on a silicon substrate while the exact geometry of the electrodes was defined via a metal mask placed on the substrate during the deposition process. Initially, the electrodes were characterised by cyclic voltammetry. The utility of these devices was tested for the trace determination of Ni(II) by square wave adsorptive stripping voltammetry (SWAdSV) after complexation with dimethylglyoxime (DMG). The experimental variables (the presence of oxygen, the DMG concentration, the preconcentration potential, the accumulation time and the SW parameters), as well as potential interferences, were investigated. Using the selected conditions, the 3sigma limit of detection was 100 ng L(-1) for Ni(II) (for 90 s of preconcentration) and the relative standard deviation for Ni(II) was 2.3% at the 10 microg L(-1) level (n=8). Finally, the method was applied to the determination of Ni(II) in a certified river water sample.     

Partition coefficients of organic molecules in squalane and water/ethanol mixtures by molecular dynamics simulations

Accurate partition coefficient data of migrants between a polymer and a solvent are of paramount importance for estimating the migration of the migrant over time, including the concentration of the migrant at infinite time in the two solvents. In this article it is shown how this partition coefficient can be estimated for both a small hydrophilic and a hydrophobic organic molecules between squalane (used here to mimic low density poly ethylene) and water/ethanol solutes using thermodynamic integration to calculate the free energy of solvation. Molecular dynamics simulations are performed, using the GROMACS software, by slowly decoupling of firstly the electrostatic and then the Lennard-Jones interactions between molecules in the simulation box. These calculations depend very much on the choice of force field. Two force fields have been tested in this work, the TraPPE-UA (united-atom) and the OPLS-AA (all-atom). The computational cheaper TraPPE-UA force field showed to be more accurate over the whole range of systems compared to the OPLS-AA force field. Moreover, some of the calculations were done with five different water models to investigate the influence of the specific water model on the calculations. It was found that the combination of the TraPPE-UA force field and the TIP4p water model gave the best results. Based on the methodology proposed in this article, it is possible to obtain good partition coefficients only knowing the chemical structure of the molecules in the system.     

Quantitative analysis of energy transfer between fluorescent proteins in CFP-GBP-YFP and its response to Ca2+

This article reports the full characterisation of the optical properties of a biosynthesised protein consisting of fused cyan fluorescent protein, glucose binding protein and yellow fluorescent protein. The cyan and yellow fluorescent proteins act as donors and acceptors for intramolecular fluorescence resonance energy transfer. Absorption, fluorescence, excitation and fluorescence decays of the compound protein were measured and compared with those of free fluorescent proteins. Signatures of energy transfer were identified in the spectral intensities and fluorescence decays. A model describing the fluorescence properties including energy transfer in terms of rate equations is presented and all relevant parameters are extracted from the measurements. The compound protein changes conformation on binding with calcium ions. This is reflected in a change of energy transfer efficiency between the fluorescent proteins. We track the conformational change and the kinetics of the calcium binding reaction from fluorescence intensity and decay measurements and interpret the results in light of the rate equation model. This visualisation of change in protein conformation has the potential to serve as an analytical tool in the study of protein structure changes in real time, in the development of biosensor proteins and in characterizing protein-drug interactions.     

Novel disposable bismuth-sputtered electrodes for the determination of trace metals by stripping voltammetry

This work describes a novel type of bismuth electrode for stripping voltammetry based on coating a silicon substrate with a thin bismuth film by means of sputtering. The bismuth-based sensors were characterized by optical methods (scanning electron microscopy (SEM), atomic force microscopy (AFM) and X-ray diffraction (XRD)) and as well as by linear sweep voltammetry. Subsequently, the electrodes were tested for the detection of low concentrations of trace metals (Cd(II), Pb(II) and Ni(II)) by stripping voltammetry. Well-formed stripping peaks were observed for trace concentrations of the target analytes demonstrating “proof-of-principle” for these sensors. This type of electrochemical device, utilizing thin-film technology for the formation of the bismuth film, holds promise for future applications in trace metal analysis.     

Novel disposable microfabricated antimony-film electrodes for adsorptive stripping analysis of trace Ni(II)

This work describes a novel type of antimony electrode for adsorptive stripping voltammetry (AdSV). The electrode was microfabricated by coating a silicon chip with a thin antimony-film by means of sputtering and the active area of the electrode was defined by photolithography. The resulting antimony-film electrodes (SbFEs) were characterized by optical and electrochemical techniques. The sensors were tested for the detection of low concentrations of Ni(II) by AdSV in the presence of dimethylglyoxime. Well-formed stripping peaks and a linear dependence of the stripping peak current on the Ni(II) concentration were observed on the microfabricated SbFEs while comparative measurements attempted with electroplated SbFEs were unsuccessful. Utilizing thin-film technology for the formation of the antimony-film extends the scope of these devices as mercury-free sensors in AdSV.