Synthesis and characterization of oligo-4-[(pyridin-3-ylimino)methyl]phenol

The oxidative polycondensation of 4-[(pyridin-3-ylimino)methyl]phenol (4-PIMP) with O₂, H₂O₂, and NaOCl was studied in an aqueous alkaline medium between 50°C and 90°C. Oligo-4-[(pyridin-3-ylimino)methyl]phenol (O-4-PIMP) prepared was characterized by ¹H-NMR, ¹³C-NMR, FT-IR, UV-VIS, size-exclusion chromatography, and elemental and thermal analyses techniques. At the optimum reaction conditions, the yield of O-4-PIMP was 18.9%, 39.4%, and 46.8% using H₂O₂, O₂, and NaOCl oxidant, respectively. According to the TG analysis, the initial degradation temperature of O-4-PIMP was 218°C, which was by 50°C higher than that of 4-PIMP. Thermal analyses of 4-PIMP and O-4-PIMP were carried out in N₂ atmosphere at 15–1000°C. The highest occupied molecular orbital, the lowest unoccupied molecular orbital, and electrochemical energy gaps of 4-PIMP and O-4-PIMP were determined from the onset potentials for n-doping and p-doping, respectively. Also, optical band gaps of 4-PIMP and O-4-PIMP were determined according to UV-VIS measurements.     

Characterization of Titania/Silica Gel by Means of Low-Pressure Nitrogen Adsorption

Adsorbents synthesized by grafting of titania onto mesoporous silica gel surfaces at different temperatures were studied by means of nitrogen adsorption–desorption and water desorption. The pore size distribution f(R_p) of titania/silica gel depends on the titania concentration (C_TiO2) and the temperature of titania synthesis. Nonuniformity of TiO₂ phase is maximal at a low C_TiO2 value (3.2 wt.% anatase deposited at 473 K), and two peaks of the fractal dimension distribution f(D) are observed at such a concentration of titania, but at larger C_TiO2 values, only one f(D) peak is seen. More ordered filling of pores and adsorption sites by nitrogen, reflecting in the shape of adsorption energy distributions f(E) at different pressures of adsorbate, is observed for adsorbent with titania (rutile+anatase) grafted on silica gel at a higher temperature (673 K).     

肝素化壳聚糖季铵盐／壳聚糖复合膜抗凝血性能的研究

以壳聚糖季铵盐，壳聚糖为基本原材料，选用戊二醛为交剂剂及固定剂，制备一种物理机械性能较优的抗凝血材料。探讨了戊二醛及肝素钠两者用量对肝素化程度及血液生的影响。     

Microwave‐assisted synthesis of phenylenedi(4′,4“‐tetrahydroquinoline) and di(4′,4”‐tetrahydropyridine) derivatives

The synthesis of bifunctional pyridine and quinolione derivatives were investigated using terephthalic and isophthalic aldehydes as a precursor. The reaction proceeds under microwave irradiation with good yield (70–92%) and short reaction time (7–9 min.). We provide a rapid and efficient method of synthesizing a range of bifunctional monocyclic and bicyclic products related to 1,4‐dihydropyridines (1,4‐DHPs).     

Silica Gel Modified Due to Pyrolysis of Acetylacetone and Metal (Ti, Cr, Co, Ni, Zn, Zr) Acetylacetonates

Mesoporous silica gels modified due to pyrolysis of acetylacetone or acetylacetonates (AcAc) of zirconium [Zr(AcAc)(4)], titanium [titanyl TiO(AcAc)(2)], nickel [Ni(AcAc)(2)], zinc [Zn(AcAc)(2)], chromium [Cr(AcAc)(3)], and cobalt [Co(AcAc)(2)] were studied using nitrogen adsorption-desorption, TPD-DTG, TEM, XRD, and XRF methods. Grafted C/X phases consist of metal compounds (X denotes oxide, silicate, or metal crystallites) and pregraphite pyrocarbon, whose characteristics can be varied by changing the metal in M(AcAc)(n). The structural parameters of C/X/SiO(2), such as the specific surface area of micro- and mesopores, pore volume, pore size and fractal dimension distributions, and adsorptive ability, depend nonlinearly on the concentrations of the C/X deposit due to alterations in the topology of grafted matters with increased concentrations and a possible catalytic effect of the X phase on pyrolysis. Copyright 2000 Academic Press.     

BaB2O4—CdO和BaB2O4—ZnO二元系相图的研究

本文用差热分析和X射线衍射方法测定了BaB_2O_4-CdO和BaB_2O_4-ZnO二元系相图。在BaB_2O_4-CdO体系中存在着一新化合物BaCdB_2O_5,在785±3℃同成份熔化。在BaB_2O_4-ZnO体系中,由包晶反应形成一新化合物BaZn_3B_2O_7,反应温度为903±3℃。在富BaB_2O_4区形成一个宽的低温相BaB_2O_4固溶区。研究结果表明,用Zn~(2 )替代BaB_2O_4中Ba~(2 )形成固溶体,不能将高温相BaB_2O_4稳定到室温,证实了“经验函数关系式”的预测结果。     

Removal of methyl violet from aqueous solution by perlite

The use of perlite for the removal of methyl violet from aqueous solutions at different concentration, pH, and temperature has been investigated. Adsorption equilibrium is reached within 1 h. The capacity of perlite samples for the adsorption of methyl violet was found to increase with increasing pH and temperature and decrease with expansion and increasing acid-activation. The adsorption isotherms are described by means of the Langmuir and Freundlich isotherms. The adsorption isotherm was measured experimentally at different conditions and the experimental data were correlated reasonably well by the adsorption isotherm of Langmuir. The order of heat of adsorption corresponds to a physical reaction. It is concluded that the methyl violet is physically adsorbed onto the perlite. The removal efficiency (P) and dimensionless separation factor (R) have shown that perlite can be used for removal of methyl violet from aqueous solutions, but unexpanded perlite is more effective.     

Molecular emission cavity analysis: Part 21. Effect of Phosphoric Acid on the Determination of Sulphate

Phosphoric acid at levels above 10^-3 M depresses the S₂ emission from sulphate, but concentrations up to 0.1 M may be necessary to eliminate cationic interferences.     

过敏性哮喘患者血清中10种必需微量元素水平的研究

３４例过敏性哮喘患者血清中铁，锌、铜，锰硒铬，钴镍，钡，钼的含量水平与对照组比较，揭示：（１）铁，铜，铬的含量升高；（２）硒，镍，钴、钒的钼的含量降低；（３）锌和锰的含量差异无显著性，Ｐ〉０．０５。     

Chemical conversion of various celluloses to glucose and its derivatives in supercritical water

The supercritical water biomass conversion system was designed and developed in our laboratory. The reaction vessel with cellulose sample was treated with this system at supercritical state of water for a designated period (3–105s) under the conditions of a tin bath temperature of 500°C and pressure of 35MPa. The recovered products of hydrolysates were then analyzed by high performance liquid chromatography. The obtained results indicated that a high amount of glucose and levoglucosan can be achieved from both celluloses I and II for 5–10s supercritical treatment, while that from starch for 3–5s treatment. Although this difference could be due to a difference in the molecular structure between cellulose and starch, a difference between celluloses I and II was not significant. Instead, an accessibility of the water towards cellulose molecules seemed to be significant for their chemical conversion. With the longer treatment, amounts of these compounds observed were decreased due to decomposition. Therefore, it may be concluded that, compared with acid hydrolysis or enzymatic saccharification, cellulose may be hydrolyzed to glucose and its derivatives more or less to the same degree as in corn starch under supercritical state. This finding suggests that the supercritical treatment can overcome the difficulties in hydrolyzing cellulose to glucose, found in the acid hydrolysis or enzymatic saccharification techniques.