Effect of cationic surfactant adsorption on the rheological and surface properties of bentonite dispersions

In this study, the adsorption, bridging, and intercalation effects of a cationic surfactant, benzyldimethyltetradecyl ammonium chloride (BDTDACl), on bentonite clay suspensions was investigated. The adsorption, rheological behaviors, and colloidal properties of the clay dispersions were determined as a function surfactant concentration. Adsorption isotherms were obtained using the batch-equilibrium technique. The rheological behavior of the clay suspensions was obtained by shear stress-shear rate measurements within 0-350 s-1 shear rates. The structure of the composite particles was analyzed by using X-ray diffraction analysis and it was found that the expansions of basal d-spacings are less than 16.80 A, suggesting a monolayer structure.     

Spectrofluorimetric Determination of Aflatoxin B1 in Winter Herbal Teas via Magnetic Solid Phase Extraction Method by using Metal–Organic Framework (MOF) Hybrid Structures Anchored with Magnetic Nanoparticles

MIL53(Al)-SiO₂@Fe₃O₄ composite was prepared by co-precipitation route with a typical Stöber synthetic process and ultrasonic-agitation, then subsequently utilized as a multi-component novel sorbent in solid-phase microextraction (SPME) of aflatoxin B1 in winter herbal teas. Microstructural properties of MIL53(Al)-SiO₂@Fe₃O₄ composite was characterized by using Fourier transform infrared (FTIR) spectroscopy, powder X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) methods, and Brunauer–Emmett–Teller (BET) surface area measurement. The MIL53(Al)-SiO₂@Fe₃O₄ composite was found to be a very effective sorbent in spectrofluorimetric determination of aflatoxin B1 (AFB1) in winter herbal teas via magnetic solid-phase extraction (SPE) route. The proposed method showed a wide linear range from 0.5 to 150 ng/ml, low limit of detection (LOD = 0.5 ng/ml), and an acceptable recovery values (70.7–96.5%) in real samples analysis. This study shows that the suggested method possesses an important potential to use for detecting AFB1 in quality control laboratories.     

2-Absorbing and Weakly 2-Absorbing Elements in Multiplicative Lattices

In this article we study weakly 2-absorbing elements and 2-absorbing elements in C-lattices. Next we characterize C-lattices in which every nonzero proper element is a (weakly) 2-absorbing element. We also establish a new characterization for principal element domains in terms of 2-absorbing elements.     

Microstructural and magnetic properties of Ax:Zn1-xO (A=Mn,Gd and Mn/Gd) nanocrystals

We report the microstructural and magnetic properties of transition (3d) and rare earth (4f) metal substituted into the A_x:Zn_1?xO (A=Mn, Gd and Mn/Gd) nanocrystal samples synthesized by solgel method. The structural properties and morphology of all samples have been analysed using X-ray diffraction (XRD) method and scanning electron microscopy. The impurity phase in the XRD patterns for all samples is not seen, except (Mn/Gd):ZnO sample where a very weak secondary phase of Gd₂O₃ is observed. Due to the large mismatch of the ionic radii between Mn²⁺ and Gd³⁺ ions, the strain inside the matrix increases, unlike the crystallite size decreases with the substitution of Mn and Gd into ZnO system. A couple of additional vibration modes due to the dopant have been observed in Raman spectrum. The magnetic properties have been studied by vibrating sample magnetometer. The magnetic hysteresis shows that Mn:ZnO and Gd:ZnO have soft ferromagnetic (FM) behaviour, whereas (Mn/Gd):ZnO has strong FM behaviour at room temperature (RT). The enhancement of ferromagnetism (FM) in (Mn/Gd):ZnO sample might be related to short-range FM coupling between Mn²⁺ and Gd³⁺ ions via defects potential and/or strain-induced FM coupling due to the expansion lattice by doping. The experimental results indicate that RTFM can be achieved by co-substitution of 3d and 4f metals in ZnO which can be used in spintronics applications.     

Influences of Electrolytes, Polymers and a Surfactant on Rheological Properties of Bentonite–Water Systems

Characteristic rheological properties, such as viscosity, shear stress, yield point, gel strength and thixotropy, of natural Ca- bentonite and Na-peptized bentonite were studied after adding LiCl, KCl, CaCl2, MgCl2·6H2O electrolytes; (NaPO3)n, polyvinyl pyrolidone (PVP) polymers and an anionic surfactant (linear alkyl benzene sulphonate, LABS). Changes in flow properties under the influence of various additives at different quantities were investigated in these slurries. The experimental results are discussed in terms of bentonite forms, types and concentrations of additives and influence of exchangeable cations. Bivalent and monovalent cations display entirely different rheological properties in two groups of muds. Furthermore, the difference in the degree of activity of PVP polymer on the viscosity of two mud systems depend on the clay mineral structure. The slurry prepared with Na-bentonite contains a minimum number of tactoids and a maximum number of sheet-bearing clay particles, which reduces the surface area of the clay minerals and increases viscosity by adding PVP polymer.     

Boundary-layer flow about a vertical spinning cone under mixed thermal boundary conditions and a magnetic field

A similarity analysis was performed to investigate the laminar boundary-layer flow in the presence of a transverse magnetic field over a down-pointing and spinning cone with mixed thermal boundary conditions. Boundary layer velocity and temperature profiles were determined numerically for various values of the magnetic and spin parameters and the Prandtl number. The spin of the cone compresses the velocity profiles towards the surface by inducing an upward flow and decreases the surface temperature. The magnetic field suppresses the velocity profiles and increases the surface temperature. A transformation relating the similarity solutions of the boundary-layer velocity and temperature profiles associated with different values of the mixed thermal boundary condition parameter was obtained.     

Investigation of the spontaneous emission rate of perylene dye molecules encapsulated into three-dimensional nanofibers via FLIM method

The decay dynamics of perylene dye molecules encapsulated in polymer nanofibers produced by electrospinning of polymethyl methacrylate are investigated using a confocal fluorescence lifetime imaging microscopy technique. Time-resolved experiments show that the fluorescence lifetime of perylene dye molecules is enhanced when the dye molecules are encapsulated in a three-dimensional photonic environment. It is hard to produce a sustainable host with exactly the same dimensions all the time during fabrication to accommodate dye molecules for enhancement of spontaneous emission rate. The electrospinning method allows us to have a control over fiber diameter. It is observed that the wavelength of monomer excitation of perylene dye molecules is too short to cause enhancement within nanofiber photonic environment of 330 nm diameters. However, when these nanofibers are doped with more concentrated perylene, in addition to monomer excitation, an excimer excitation is generated. This causes observation of the Purcell effect in the three-dimensional nanocylindrical photonic fiber geometry.     

A New Fluorometric Dosimetry for Low-medium Gamma Radiation Doses

Journal of Fluorescence - In this study, for the first-time, solutions of a Schiff base was evaluated as a possible chemical dosimeter for gamma-rays at low-medium dose ranges. The solutions of...     

Removal of Pb2+ and Cd2+ ions from aqueous solutions using guanidine modified hydrogels

In this study, experimental measurements have been made on the batch adsorption of cadmium and lead ions from aqueous solutions using poly(guanidine modified 2‐acrylamido‐2‐methylpropan sulfonic acid/acrylic acid/N‐vinylpyrrolidone/2‐Hydroxyethyl methacrylate), P(AMPSG/AAc/NVP/HEMA) hydrogels. The guanidyl end group bearing AMPSG monomer was synthesized from the reaction of AMPS and guanidine. The hydrogels were prepared by UV‐curing technique. The morphology of the dry H10‐hydrogel sample was examined by SEM. The influence of the uptake conditions, such as pH, functional monomer per cent, contact time, initial feed concentration, and foreign metal ions on the metal ion binding capacity of hydrogel, was also tested. The selectivity of the hydrogel toward the different metal ions tested was Hg(II) > Pb(II) > Au(III) > Cd(II). The adsorption isotherm models were applied to the experimental data, and it was seen that the Langmuir isotherm model was the best fit for the adsorption of Cd(II) and Pb(II) ions on P(AMPSG/AAc/NVP/HEMA) hydrogel. It was found that adsorbed lead and cadmium ions on P(AMPSG/AAc/NVP/HEMA) hydrogel can be effectively desorbed by acid leaching and the regenerated P(AMPSG/AAc/NVP/HEMA) hydrogel can be reused almost five times less without any loss of adsorption capacity. Copyright © 2009 John Wiley & Sons, Ltd.     

Comparison of separation performance of polysaccaride-based chiral stationary phases in enantioseparation of 1-(4-chlorobenzhydryl)piperazine benzamide derivatives by HPLC

Analytical high-performance liquid chromatographic enantioseparation of 1-(4-chlorobenzhydryl) piperazine benzamide derivatives was accomplished on different chiral stationary phases. The enantiomers of the compounds were resolved by normal-phase chromatography on silica-based amylose tris(3,5-dimethylphenylcarbamate) (Chiralpak AD-H), cellulose tris(3,5-dimethylphenylcarbamate) (Chiralcel OD-H) and cellulose tris(4-methylbenzoate) (Chiralcel OJ) columns with mobile phases consisting of mixtures of n-hexane and ethanol in different proportions (90: 10, 80: 20). The mobile phase and the chiral stationary phase were varied to achieve the best resolution. The effect of the concentration of ethanol in the mobile phase was studied. The resolution obtained on the three columns was significant.