Gold layers on untreated and plasma-treated substrates of quaternized polysulfones

Thin gold layers were sputtered on the quaternized polysulfones (containing different tertiary amines—N,N-dimethylethylamine and N,N-dimethyloctylamine, respectively) surfaces unmodified and modified by low-pressure and high-frequency plasma treatment. Adhesion and morphological aspects of complex structures were studied for different gold sputtering and plasma treatment times. Water contact angle, atomic force microscopy, and surface properties reveal that adhesion increases with gold sputtering and plasma treatment times. Values of the mean adhesion force between cantilever and the studied surfaces, measured from AFM investigation, were correlated with quaternized polysulfone structures, modification of hydrophobicity after plasma treatment, and gold deposition on polymer surfaces.     

Simultaneous Determination of Pb and Cd Traces in Water Samples by Anodic Stripping Voltammetry Using a Modified GC Electrode

The determination of Pb and Cd with a Nafion‐modified glassy carbon electrode and Cu‐DPABA complex (Cu‐DPABA–NA/GCE; DPABA is methyl 3,5‐bis{bis‐[(pyridin‐2‐yl)methyl]amino}methyl‐benzoate) as an alternative electrode for anodic stripping voltammetry was described. Pb and Cd were accumulated in acetate buffer pH 4 at a potential of ?1.4 V (vs. Ag/AgCl electrode) for 120 s followed by a DPASV scan from ?1.2 to ?0.2 V. Under optimum conditions the calibration curves were linear in the range of 4.8×10^?9–5.0×10^?5 and 5.0×10^?9–5×10^?5 mol L^?1 for Pb and Cd, respectively. Detection limits were 1.8×10^?9 and 1.2×10^?9 mol L^?1 for Pb and Cd, respectively. Different parameters and conditions, such as membrane ingredients, accumulation time, potential and pH value were optimized. A study of interfering substances was also performed. A significant increase in current was achieved at the modified electrode in comparison with the bare glassy carbon electrode. The validation of the proposed method was made by Pb and Cd determination in the certified reference material Groundwater CRM 610 (BCR, Community Bureau of Reference, Brussels, Belgium). The electrode was successfully applied for determination of Pb and Cd in river water with a high content of organic contaminants without any pretreatment.     

Ferromagnetism in Metallocene-Doped Fullerenes

 Ferromagnetism in fullerene-based systems doped with metallocenes is reviewed. These compounds form a ferromagnetic state by spin-coupling between π electrons on fullerene units, while the metallocene molecules do not contribute to the spin ordering. One of these compounds has the highest critical temperature (19 K) for this class of compound. The magnetic properties of these materials are very strongly dependent on the crystallization conditions. Corresponding author. E-mail: Dragan.Mihailovic@ijs.si Received September 4, 2002; accepted September 6, 2002     

Energetics of radical transfer in DNA photolyase

Charge separation and radical transfer in DNA photolyase from Escherichia coli is investigated by computing electrostatic free energies from a solution of the Poisson-Boltzmann equation. For the initial charge separation 450 meV are available. According to recent experiments [Aubert et al. Nature 2000, 405, 586-590] the flavin receives an electron from the proximal tryptophan W382, which consequently forms a cationic radical WH(*)(+)382. The radical state is subsequently transferred along the triad W382-W359-W306 of conserved tryptophans. The radical transfer to the intermediate tryptophan W359 is nearly isoenergetic (58 meV uphill); the radical transfer from the intermediate W359 to the distal W306 is 200 meV downhill in energy, funneling and stabilizing the radical state at W306. The resulting cationic radical WH(*)(+)306 is further stabilized by deprotonation, yielding the neutral radical W(*)306, which is 214 meV below WH(*)(+)306. The time scale of the charge recombination process yielding back the resting enzyme with FADH(*) is governed by reprotonation of W306, with a calculated lifetime of 1.2 ms that correlates well with the measured lifetime of 17 ms. In photolyase from Anacystis nidulans the radical state is partially transferred to a tyrosine [Aubert et al. Proc. Natl. Acad. Sci. U.S.A. 1999, 96, 5423-5427]. In photolyase from Escherichia coli, there is a tyrosine (Y464) close to the distal tryptophan W306 that could play this role. We show that this tyrosine cannot be involved in radical transfer, because the electron transfer from tyrosine to W306 is much too endergonic (750 meV) and a direct hydrogen transfer is likely too slow. Coupling of specific charge states of the tryptophan triad with protonation patterns of titratable residues of photolyase is small.     

Factors that influence the tribo-charging of insulating ducts in suction-type dilute-phase pneumatic transport systems

The aim of this study is to refine the understanding of the tribo-electrostatic phenomena that can affect the efficiency of suction-type dilute-phase transport systems. The study was conducted with mm-size ABS-PC particles, a granular material originating from genuine information technology wastes. The tribo-charging process was modelled using the response surface method of experimental design. The controlled variables were the granular material feed rate and the aspirating air speed rate. The monitored variable was the charge imparted to a well-defined section of the duct and which is equal to the charge transferred to the particles passing through that section of the pneumatic transport system. An induction type sensor connected to an electrometer has been employed for the measurements. The data were processed by a virtual instrument developed in LabView. A commercial software package was employed for estimating the effects of the various factors and predicting the optimum operating conditions, which were then confirmed by a final experiment.     

Hamiltonian circuits in Cayley graphs

The following result is proved: If either G is a finite abelian group or a semidirect product of a cyclic group of prime order by a finite abelian group of odd order, then every connected Cayley graph of G is hamiltonian.     

Hole interactions with molecular vibrations on DNA

We report on a study of the interactions between holes and molecular vibrations on dry DNA using photoinduced infrared absorption spectroscopy. Laser photoexcited holes are found to have a room-temperature lifetime in excess of tau > 1 ms, clearly indicating the presence of localization. However, from a quantitative model analysis of the frequency shifts of vibrational modes caused by the holes, we find the hole-vibrational coupling constant to be relatively small, lambda approximately 0.2. This interaction leads to a change in the conformational energy of DeltaE0 approximately 0.015 eV, which is too small to cause self-trapping at room temperature. We conclude that, at least in the dry (A) form, DNA is best understood in terms of a double chain of coupled quantum dots arising from the pseudorandom chain sequence of base pairs, in which Anderson localization prevents the formation of a metallic state.     

Phosphorus as sintering activator in powder metallurgical steels: characterization of the distribution and its technological impact

Powder metallurgy is a highly developed method of manufacturing reliable ferrous parts. The main processing steps in a powder metallurgical line are pressing and sintering. Sintering can be strongly enhanced by the formation of a liquid phase during the sintering process when using phosphorus as sintering activator. In this work the distribution (effect) of phosphorus was investigated by means of secondary ion mass spectrometry (SIMS) supported by Auger electron spectroscopy (AES) and electron probe micro analysis (EPMA). To verify the influence of the process conditions (phosphorus content, sintering atmosphere, time) on the mechanical properties, additional measurements of the microstructure (pore shape) and of impact energy were performed. Analysis of fracture surfaces was performed by means of scanning electron microscopy (SEM). The concentration of phosphorus differs in the samples from 0 to 1% (w/w). Samples with higher phosphorus concentrations (1% (w/w) and above) are also measurable by EPMA, whereas the distributions of P at technically relevant concentrations and the distribution of possible impurities are only detectable (visible) by means of SIMS. The influence of the sintering time on the phosphorus distribution will be demonstrated. In addition the grain boundary segregation of P was measured by AES at the surface of in-situ broken samples. It will be shown that the distribution of phosphorus depends also on the concentration of carbon in the samples.     

Effect of Alkyl Side Chain on the Conformational Properties of Polysulfones with Quaternary Groups

Modification of intrinsic viscosity, temperature coefficient, and preferential adsorption coefficient of polysulfones with different alkyl side groups in N,N-dimethylformamide/methanol and N,N-dimethylformamide/water was investigated at different compositions and temperatures. The specific interactions, such as hydrogen bonding and polyelectrolyte effect induced by an enhanced dissociation of the ionizable groups, determine both the modification of the solvation power of the polymer coil and the difference in the composition of the mixed solvent inside and outside the coil.     

Conformational changes of strong polycations in the presence of divalent counterions and their influence upon the flocculation efficiency

The interaction between strong polycations, which possess the ammonium quaternary centers attached to an acrylic macromolecular chain derived from poly(N,N-dimethylaminoethyl methacrylate) (polycations Q_x), and divalent counterions was investigated by viscometry and turbidimetry. Conformational changes of polycations were influenced by the polycation charge density, counterion nature (SO₄²⁻ or S₂O₈²⁻) and concentration. The morphology of the polycation layers deposited onto silicon wafers has been studied by tapping mode atomic force microscopy, a strong influence of the polycation and ammonium persulfate concentration on the surface topography being observed. The optimum flocculation concentration of polycation decreased and the flocculation window increased in the presence of S₂O₈²⁻, in the destabilization of kaolin model dispersion. Removal of Congo Red from aqueous solution by the complex system formed between polycations and divalent counterions was also investigated. The behavior of polycations Q_x in separation processes was compared with that of one polycation containing 95 mol% N,N-dimethyl-2-hydroxypropyleneammonium chloride units in the backbone (PCA₅).