Stationary State Entanglement of Two Atoms Inside an Optical Cavity under Noise

In this paper, the entanglement properties of a system of two atoms inside an optical cavity in a stochastic interaction with field are studied by the Jaynes-Cummings Model. The phase telegraph noise is considered as a noise term and an exact solution to the model is obtained. The solution reveals the resulting decoherence effects of the noise on the entanglement properties of the system. It shows that under the noise the individual atoms do not entangle with the cavity field. However, a strong atom-atom entanglement is observed in a stationary state. It is seen that a relatively strong noise is cooperative in the construction of the steady state atom-atom entanglement.     

Nonlinear Responses of a Magnetoelastic Beam in a Step-Pulsed Magnetic Field

A theoretical study is carried out on the dynamics of a magnetoelastic beam being in a step-pulsed magnetic field. For this aim, the magnetic potential and elastic energies are determined for the beam and partial differential equations are established according to Hamilton's principle. It is proven that the magnetoelastic beam can give a variety of complex behavior in the case of step-pulsed field excitations. An intermediate regime of two-well chaos is observed. Theoretical findings were found to be in a good agreement with the experimental results for the specific system parameters. On leave from Institute of Physics, University of Bayreuth, 65440 Bayreuth, Germany An erratum to this article is available at .     

Optimizing the Simplon railway corridor

This paper presents a case study of a railway timetable optimization for the very dense Simplon corridor, a major railway connection in the Alps between Switzerland and Italy. The key to deal with the complexity of this scenario is the use of a novel aggregation-disaggregation method. Starting from a detailed microscopic representation as it is used in railway simulation, the data is transformed by an automatic procedure into a less detailed macroscopic representation, that is sufficient for the purpose of capacity planning and amenable to state-of-the-art integer programming optimization methods. This macroscopic railway network is saturated with trains. Finally, the optimized timetable is re-transformed to the microscopic level in such a way that it can be operated without any conflicts among the train paths. Using this micro-macro aggregation-disaggregation approach in combination with integer programming methods, it becomes for the first time possible to generate a profit maximal and conflict free timetable for the complete Simplon corridor over an entire day by a simultaneous optimization of all trains requests. In addition, this also allows us to undertake a sensitivity analysis of various problem parameters.     

Synthesis and characterization of a methacrylate polymer with side chain ketone and its derivatives

A new type of methacrylate monomer,2-(4-benzoylphenoxy)-2-oxoethyl methylacrylate(BOEMA) was synthesized.The radical homopolymerization of BOEMA was performed at 65℃in a 1,4-dioxane solution with benzoyl peroxide as an initiator.The oxime and thiosemicarbazone derivatives of poly[2-(4-benzoylphenoxy)-2-oxoethyl methylacrylate]poly(BOEMA) were prepared with hydroxylamine hydrochloride,and thiosemicarbazone hydrochloride, respectively.The monomer and its homopolymer were characterized with Fourier transform infrared and NMR techniques. The thermal stabilities of poly(BOEMA) and its derivatives were investigated with thermogravimetric analysis and differential scanning calorimetry.The ultraviolet stability of the polymers was compared.The antibacterial and antifungal effects of the monomer and the polymer and its derivatives were also investigated on various bacteria and fungi.The activation energies of the thermal degradation of the polymers were calculated with the Ozawa and Kissinger methods.     

Global behavior of homogeneous random neural systems

We define a simple form of homogeneous neural network model whose characteristics are expressed in terms of probabilistic assumptions. The networks considered operate in an asynchronous manner and receive the influence of the environment in the form of external stimulations. The operation of the network is described by means of a Markovian process whose steady-statesolution yields several global measures of the network's activity. Three different types of external stimulations are investigated, which represent possible input mechanisms. The analytical results obtained concern the macroscopic viewpoint and provide a quick insight into the structure of the network's behavior.     

Molecular origin of model membrane bending rigidity

The behavior of the bending modulus kappa of bilayers in lamellar phases was studied by Small Angle X-ray Scattering technique for various nonionic C(i)E(j) surfactants. The bilayers are either unswollen and dispersed in water or swollen by water and dispersed in dodecane. For unswollen bilayers, the values of kappa decrease with both an increase in the area per surfactant molecule and in the polar head length. They increase when the aliphatic chain length increases at constant area per surfactant molecule. Whereas for water-swollen membranes, the values of kappa decrease as the content of water increases converging to the value of the single monolayer bending modulus. Such a behavior results from the decoupling of the fluctuations of the two surfactant membrane monolayers. Our results emphasize the determinant contribution of the surfactant conformation to kappa.     

Two-step polymerization approach for synthesis of macroporous surface ion-imprinted cryogels

Today, the surface imprinted polymers emerge in various fields as synthetic adsorbents gaining attention in a variety of application areas. In this study, Cu(II) ion surface imprinted poly(2-hydroxyethyl methacrylate-glycidyl methacrylate), poly(HEMA-GMA), cryogels were synthesized via modified two-step polymerization which is different from given in literature and the adsorption of Cu(II) ion from aqueous solution was investigated batch wise. In this respect, the method applied in this study is new in the literature despite heavy metal removal studies reported. The polyethyleneimine (PEI) molecule was used in polymeric structure as a ligand. The poly(HEMA-GMA) cryogels prepared was characterized via Fourier transform infrared spectroscopy (FTIR), inductively coupled plasma optical emission spectrometry (ICP-OES), elemental analysis, scanning electron microscopy (SEM) and the micro-computed tomography (μCT).     

Rheological behavior of concentrated suspensions as affected by the dynamics of the mixing process

The rheological characterizations of concentrated suspensions are generally carried out assuming “well-mixed” suspensions. However, the variation of the concentration distributions of the ingredients of the formulation, i.e., the “goodness of mixing”, the size and shape distributions of the particle clusters and the rheological behavior of the suspension all depend on the thermo-mechanical history that the suspension is exposed to during the mixing process. Here, various experimental tools are used for the characterization of the degree of mixedness (concentration distributions) of various ingredients along with the characterization of rheological material functions, wall slip behavior and the maximum packing fraction of a graphite/elastomer suspension. The degree of mixedness values of the ingredients of the suspensions processed using batch and continuous processes and under differing operating conditions were characterized quantitatively using wide-angle X-ray diffraction and thermo gravimetric analysis and were elucidated under the light of the electrical properties of the suspension as affected by the mixing process. Upon achieving better homogeneity of the graphite particles and the binder and decreases in the size and breadth of the size distributions of particle clusters (as inferred from electrical measurements and maximum packing fraction values), the elasticity (storage modulus) and the shear viscosity (magnitude of the complex viscosity from small-amplitude oscillatory shear and shear viscosity from steady torsional and capillary rheometry) of the suspension decreased significantly and the wall slip velocity values increased. These findings demonstrate the intimate relationships that exist between the rheological behavior of concentrated suspensions and the thermo-mechanical history that they are exposed to during the processing stage and suggest that the preparation conditions for suspensions should be carefully selected and well documented to achieve reproducible characterization of rheological material functions.     

Molecular structure and vibrational spectra of [2-Oxo-2-(4-acetyl) phenyl amino] ethylene methacrylate by density functional theory and ab initio Hartree–Fock calculations

The molecular geometry and vibrational frequencies of the [2-Oxo-2-(4-acetyl) phenyl amino] ethylene methacrylate (APEMA) were examined theoretically using the Hartree–Fock and Density function method (B3LYP) with 6-31G(d) basis set. The calculated geometrical parameters of the investigated molecule were compared with experimental data. Both the calculated structural parameters and vibrational frequencies are in good agreement with the available experimental data.