Double transacetalization of diacylium ions

A novel gas-phase reaction of diacylium ions of the O=C=X(+)=C=O type (X = N, CH) is reported: double transacetalization with cyclic acetals or ketals. The reaction is exothermic and highly efficient, and forms members of a new class of highly charged-delocalized ions: cyclic ionic diketals. Pentaquadrupole double- and triple-stage mass spectrometric (MS(2) and MS(3)) experiments reveal the high double transacetalization reactivity of O=C=N(+)=C=O and O=C=CH(+)=C=O, whereas the synthesis of differently substituted cyclic ionic diketals is performed in MS(3) experiments via sequential mono- and double transacetalization of O=C=N(+)=C=O and O=C=CH(+)=C=O with different acetals. With cyclic acetals, the acylium-thioacylium ion O=C=N(+)=C=S reacts promptly and selectively by mono-transacetalization at its acylium site, but the free thiacylium site of its cyclic ionic ketal is nearly unreactive by double transacetalization. Therefore, only the acylium site of O=C=N(+)=C=S can be efficiently protected by transacetalization. Low-energy MS(3) collision-induced dissociation of the cyclic ionic diketals of O=C=N(+)=C=O and O=C=CH(+)=C=O sequentially frees each of the protected acylium site to form the mono-derivatized ion, and then the fully deprotected diacylium ion.     

Synthesis and characterization of the [Ru<Subscript>3</Subscript>O(CH<Subscript>3</Subscript>COO)<Subscript>6</Subscript>(py)<Subscript>2</Subscript>(BPE)Ru(bpy)<Subscript>2</Subscript>Cl](PF<Subscript>6</Subscript>)<Subscript>2</Subscript> dimer

The polymetallic [Ru₃O(CH₃COO)₆(py)₂(BPE)Ru(bpy)₂Cl](PF₆)₂ complex (bpy = 2,2′-bipyridine, BPE = trans-1,2-bis(4-pyridil)ethylene and py = pyridine) was assembled by the combination of an electroactive [Ru₃O] moiety with a [Ru(bpy)₂(BPE)Cl] photoactive centre, and its structure was determined using positive ion electrospray (ESI-MS) and tandem mass (ESI-MS/MS) spectrometry. The [Ru₃O(CH₃COO)₆(py)₂(BPE)Ru(bpy)₂Cl]²⁺ doubly charged ion of m/z 732 was mass-selected and subject to 15 eV collision-induced dissociation, leading to a specific dissociation pattern, diagnostic of the complex structure. The electronic spectra display broad bands at 409, 491 and 692 nm ascribed to the [Ru(bpy)₂(BPE)] charge-transfer bands and to the [Ru₃O] internal cluster transitions. The cyclic voltammetry shows five reversible waves at −1.07 V, 0.13 V, 1.17 V, 2.91 V and −1.29 V (vs SHE) assigned to the [Ru₃O]^{−1/0/+1/+2/+3} and to the bpy^0/−1 redox processes; also a wave is observed at 0.96 V, assigned to the Ru^+2/+3 pair. Despite the conjugated BPE bridge, the electrochemical and spectroelectrochemical results indicate only a weak coupling through the π-system, and preliminary photophysical essays showed the compound decomposes under visible light irradiation.     

The use of electrospray ionization tandem mass spectrometry on the structural characterization of novel asymmetric metallo-organic supermolecules,based on pentafluorophenylporphyrins and ruthenium complexes

The novel asymmetric metallo-organic triads cis- and trans-[B(4-py)BPFPH₂{Ru₃O(Ac)₆(py)₂}{Ru(bpy)₂Cl}](PF₆)₂ (5a,b) for which cis- and trans-B(4-py)BPFPH₂ = 5,10-bis(pentafluorophenyl)-15,20-bis(4-pyridyl)porphyrin and 5,15-bis(pentafluorophenyl)-10,20-bis(4-pyridyl)porphyrin, respectively; Ac = acetate; py = pyridine and bpy = 2,2′-bipyridine, as well as their corresponding monosubstituted dyads cis- and trans-[B(4-py)BPFPH₂{Ru₃O(Ac)₆(py)₂}]PF₆ (4a,b) have been structurally characterized via electrospray ionization mass spectrometry (ESI-MS and ESI-MS/MS). The ESI-MS of dyads 4a,b display two characteristic Ru-multicomponent clusters of isotopologue ions corresponding to singly charged ions 4a,b⁺ of m/z 1629 and doubly charged ions [4a,b+H]²⁺ of m/z 815 and the triads 5a,b are detected by ESI-MS as the intact doubly charged cluster of isotopologue ions of m/z 1039 [5a,b]²⁺. The ESI-MS/MS of 4a,b⁺, [4a,b+H]²⁺ and [5a,b]²⁺ reveal characteristic dissociation pathways, which confirm the structural assignments providing additional information on the intrinsic binding strengths of the gaseous ions. Although the gas-phase behavior of each pair of isomers was rather similar, the less symmetric dyads 4a,b are distinguished via the ¹H NMR spectral profile of the pyrrolic signals. Exploratory photophysical assays have shown that both modifying motifs alter the porphyrinic core emission profile, opening the possibility to use these asymmetric systems as photophysical devices.     

Recognition of cyclic, acyclic, exocyclic, and spiro acetals via structurally diagnostic ion/molecule reactions with the (CH3)2N-C(+)=O acylium ion

Reactions of the model acylium ion (CH3)2N-C(+)=O with acyclic, exocyclic, and spiro acetals of the general formula R(1)O-CR(3)R(4)-OR(2) were systematically evaluated via pentaquadrupole mass spectrometry. Characteristic intrinsic reactivities were observed for each of these classes of acetals. The two most common reactions observed were hydride and alkoxy anion [R(1)O(-) and R(2)O(-)] abstraction. Other specific reactions were also observed: (a) a secondary polar [4(+) + 2] cycloaddition for acetals bearing alpha,beta-unsaturated R(3) or R(4) substituents and (b) OH(-) abstraction for exocyclic and spiro acetals. These structurally diagnostic reactions, in conjunction with others observed previously for cyclic acetals, are shown to reveal the class of the acetal molecule and its ring type and substituents and to permit their recognition and distinction from other classes of isomeric molecules.     

Faster and simpler determination of chlorophenols in water by fiber introduction mass spectrometry

Solid phase microextraction (SPME) of chlorophenols [2-chlorophenol (2CP), 2,4-dichlorophenol (24CP), 4-chloro-3-methylphenol (43CP), 2,4,6-tri-chlorophenol (246CP) and pentachlorophenol (PCP)] followed by direct mass spectrometric analysis has been performed by fiber introduction mass spectrometry (FIMS). Two SPME fibers (65 μm PDMS/DVB and 85 μm PA fibers) were tested, and FIMS was performed via selective ion monitoring (SIM). The extractions were evaluated at 10% ionic strength and pH 1. Best extraction times were determined for both fibers. Limits of detection (LOD) and limits of quantification (LOQ) for both fibers were in the low μg L⁻¹ range. Coefficients of correlation for the analytical curves showed linear responses and mineral water and river water samples spiked with 50 μg L⁻¹ presented high recoveries. FIMS, as compared to current EPA methods, is demonstrated to allow faster and simpler (elimination of pre-separation or derivatization steps) analysis of chlorophenols in water with the required sensitivity.     

Atmospheric pressure thermal dissociation of phospho- and sulfopeptides

Several phospho- and sulfopeptides were subjected to atmospheric pressure thermal dissociation (APTD), which was effected by passing peptide ions generated by electrosonic spray ionization (ESSI) through a heated coiled metal tube. Sequence informative fragment ions including a-, b-, c-, and y-types of ions were observed with increased relative intensities under APTD compared with collision-induced dissociation (CID), performed inside the ion trap. A certain degree of preservation of phosphate and sulfate ester moieties was observed for some fragments ions under APTD. The neutral fragments generated outside the mass spectrometer were further analyzed via on-line corona discharge to provide rich and complementary sequence information to that provided by the fragment ions directly obtained from APTD, although complete losses of the modification groups were noted. Improved primary sequence information for phospho- and sulfopeptides was typically obtained by analyzing both ionic and neutral fragments from APTD compared with fragment ions from CID alone. Localization of the modification sites of phospho- and sulfopeptides was achieved by combining the structural information acquired from APTD and CID.     

Recognizing alpha-, beta- or gamma-substitution in pyridines by mass spectrometry

A general mass spectrometric method able to recognize the site of substitution of monosubstituted pyridines is described. The method requires that the molecule under investigation forms, upon ionization and dissociation, the respective alpha-, beta- or gamma- pyridinium ion of m/z 78. Pyridinium ions are stable and common fragments of ionized and protonated pyridines and are found to function as appropriate structurally diagnostic fragment ions. They can be identified by their characteristic and nearly identical collision-induced dissociation behavior and distinguished by the combined use of two structurally diagnostic ion/molecule reactions with acetonitrile and 2-methyl-1,3-dioxolane. alpha-, beta- or gamma-substitution in pyridines can, therefore, be securely recognized via an MS-only method based on structurally diagnostic ions and by the inspection of a single molecule (no need for intracomparisons within the whole set of isomers).     

Cyclization reactions of acylium and thioacylium ions with isocyanates and isothiocyanates: Gas phase synthesis of 3,4-dihydro-2,4-dioxo-2H-1,3,5-oxadiazinium ions

Gas-phase reactions of several acylium and thioacylium ions, that is H2C=N-C+=O, H2C=N-C+=S, O=C=N-C+=O, S=C=N-C+=O, H3C-C+=O, and (CH3)2N-C+=O, with both a model isocyanate and isothiocyanate, that is, C2H5-N=C=O and C2H5-N=C=S, were investigated using tandem-in-space pentaquadrupole mass spectrometry. In these reactions, the formation of mono- and double-addition products is observed concurrently with proton transfer products. The double-addition products are far more favored in reactions with ethyl isocyanate, whereas the reactions with ethyl isothiocyanate form, preferentially, either the mono-addition product or proton transfer products, or both. Retro-addition dominates the low-energy collision-induced dissociation of the mono- and double-addition products with reformation of the corresponding reactant ions. Ab initio calculations at Becke3LYP//6-311 + G(d,p) level indicate that cyclization is favored for the double-addition products and that products equivalent to those synthesized in solution, that is, of 3,4-dihydro-2,4-dioxo-2H-1,3,5-oxadiazinium ions and sulfur analogs, are formed.     

Amino acid quantitation in aqueous matrices via trap and release membrane introduction mass spectrometry: homocysteine in human plasma

Trap and release membrane introduction mass spectrometry (T&R-MIMS) using a removable direct insertion membrane probe (DIMP) is employed to determine the total homocysteine concentration (tHcy) directly from human plasma after derivatization with ethyl chloroformate. The method uses no chromatographic separation, is linear, reproducible, and displays limit of quantitation (2 pM) sufficiently below the threshold concentration of tHcy in plasma. It also combines chemical, membrane, and mass spectrometric discrimination, and can be used to determine selected amino acids in human plasma simultaneously. After derivatization with ethyl chloroformate, many amino acids in aqueous solution are observed to be efficiently detected; hence T&R-MIMS is promising as a simple and sensitive technique for simultaneous quantitation of selected amino acids in plasma and urine, and in other aqueous matrices.     

Determination of RSD921 in human plasma by high-performance liquid chromatography-tandem mass spectrometry using tri-deuterated RSD921 as internal standard: application to a phase I clinical trial.

A fast, sensitive and specific method is presented for the quantification of RSD921 in human plasma by liquid chromatography coupled with tandem mass spectrometry using tri-deuterated RSD921 (3d-RSD921) as an internal standard. A single-step liquid/liquid extraction was performed with diethyl ether/hexane (80 : 20, v/v) using 0.5 ml of plasma. The plasma calibration curves were linear from 0.1 to 20 ng ml(-1) (r > 0.999). Between-run precision, based on the percent relative deviation for replicate (n = 40) quality controls, was < or =7.27% (0.5 ng ml(-1)), < or =7.39% (5.0 ng ml(-1)), and < or =5.06% (20.0 ng ml(-1)). Between-run accuracies, based on the relative error, were +/-2.59%, +/-1.23% and +/-1.64% respectively. The method was developed to evaluate the pharmacokinetic profile after 15 min of intravenous stepwise-ascending infusion dose of RSD921 in 18 healthy volunteers. A dissociation study of protonated RSD921 and 3d-RSD921 by collision-induced dissociation using in-source fragmentation and tandem mass spectrometry is also presented.