Tracking sperm whales with a towed acoustic vector sensor

Passive acoustic towed linear arrays are increasingly used to detect marine mammal sounds during mobile anthropogenic activities. However, these arrays cannot resolve between signals arriving from the port or starboard without vessel course changes or multiple cable deployments, and their performance is degraded by vessel self-noise and non-acoustic mechanical vibration. In principle acoustic vector sensors can resolve these directional ambiguities, as well as flag the presence of non-acoustic contamination, provided that the vibration-sensitive sensors can be successfully integrated into compact tow modules. Here a vector sensor module attached to the end of a 800 m towed array is used to detect and localize 1813 sperm whale "clicks" off the coast of Sitka, AK. Three methods were used to identify frequency regimes relatively free of non-acoustic noise contamination, and then the active intensity (propagating energy) of the signal was computed between 4-10 kHz along three orthogonal directions, providing unambiguous bearing estimates of two sperm whales over time. These bearing estimates are consistent with those obtained via conventional methods, but the standard deviations of the vector sensor bearing estimates are twice those of the conventionally-derived bearings. The resolved ambiguities of the bearings deduced from vessel course changes match the vector sensor predictions.     

Grain-boundary fluctuations in two-dimensional colloidal crystals

We study grain-boundary fluctuations in two-dimensional colloidal crystals in real space and time using video microscopy. The experimentally obtained static and dynamic correlation functions are very well described by expressions obtained using capillary wave theory. This directly leads to values for the interfacial stiffness and the interface mobility, the key parameters in curvature-driven grain-boundary migration. Furthermore, we show that the average grain-boundary position exhibits a one-dimensional random walk as recently suggested by computer simulations [Z. T. Trautt, M. Upmanyu, and A. Karma, Science 314, 632 (2006)]. The interface mobility determined from the mean-square displacement of the average grain-boundary position is in good agreement with values inferred from grain-boundary fluctuations.     

Antibacterial Activity and Synergistic Effect of Biosynthesized AgNPs with Antibiotics Against Multidrug-Resistant Biofilm-Forming Coagulase-Negative Staphylococci Isolated from Clinical Samples

Silver nanoparticles form promising template for designing antimicrobial agents against drug resistant pathogenic microorganisms. Thus, the development of a reliable green approach for the synthesis of nanoparticles is an important aspect of current nanotechnology research. In the present investigation, silver nanoparticles synthesized by a soil Bacillus sp. were characterized using UV–vis spectroscopy, FTIR, SEM, and EDS. The antibacterial potential of biosynthesized silver nanoparticles, standard antibiotics, and their conjugates were evaluated against multidrug-resistant biofilm-forming coagulase-negative S. epidermidis strains, S. aureus, Salmonella Typhi, Salmonella Paratyphi, and V. cholerae. Interestingly, silver nanoparticles (AgNPs) showed remarkable antibacterial activity against all the test strains with the highest activity against S. epidermidis strains 145 and 152. In addition, the highest synergistic effect of AgNPs was observed with chloramphenicol against Salmonella typhi. The results of the study clearly indicate the promising biomedical applications of biosynthesized AgNPs.     

Multi-instrument characterization of HiPIMS and DC magnetron sputtered tungsten and copper films

In this work, copper and tungsten were sputtered onto silicon wafers by direct current magnetron sputtering (DCMS) and high-power impulse magnetron sputtering (HiPIMS). The resulting films were characterized by energy dispersive X-ray spectroscopy (EDX), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), atomic force microscopy (AFM), spectroscopic ellipsometry (SE), and X-ray diffraction (XRD). By EDX and XPS, all the sputtered films showed only the expected metal peaks. By XPS, the surfaces sputtered by DCMS were richer in oxygen than those produced by HiPIMS. By AFM, the surfaces were quite smooth. The root mean square (RMS) roughness values are as follows: 0.83 nm (W, HiPIMS), 1.10 nm (W, DCMS), 0.85 nm (Cu, HiPIMS), and 1.78 nm (Cu, DCMS). By SEM, the HiPIMS films exhibited smaller grain sizes, which was confirmed by XRD. The crystallite sizes estimated by XRD are as follows: 4 nm (W, body-centered cubic, HiPIMS), 13 nm (W, body-centered cubic, DCMS), 7 nm (W, cubic, HiPIMS), 14 nm (W, cubic, DCMS), 25 nm (Cu, HiPIMS), and 35 nm (Cu, DCMS). By SE, the HiPIMS surfaces showed higher refractive indices, which suggested that they were denser and less oxidized than the DCMS surfaces.     

Further experiments on pyrolysis of 2,2-dimethylpropane behind shock waves

Pyrolysis of a dilute mixture of neopentane (2,2-dimethylpropane) has been studied behind incident shock waves at an average pressure of 0.35 atm; the reaction was followed by absorption spectroscopy for H atoms. In the temperature range 1230–1455 K, the rate constant for dissociation of neopentane to t-butyl and methyl radicals is 1.1 E 13 exp(?62 kcal/RT) s^?1. These data and some of the literature results, between 1000 and 1450 K, can be fitted by an RRKM model of the hindered Gorin type, with five active internal rotors in the complex. To match our data with other literature data down to 800 K, a vibrational model was more satisfactory, but this did not fit very low pressure pyrolysis data in the 1000–1100 K range. Apparently, the VLPP data are too high because of heterogeneous processes or chain reactions.     

Surface of liquid water: three-body interactions and vibrational sum-frequency spectroscopy

Phase-sensitive vibrational sum-frequency experiments on the water surface, using isotopic mixtures of water and heavy water, have recently been performed. The experiments show a positive feature at low frequency in the imaginary part of the susceptibility, which has been difficult to interpret, and impossible to reproduce using two-body (pairwise-additive) water simulation models. We have reparameterized a new three-body simulation model for liquid water, and with this model we calculate the imaginary part of the sum-frequency susceptibility, finding good agreement with experiment for dilute HOD in D(2)O. Theoretical analysis provides a molecular-level structural interpretation of these new and exciting experiments. In particular, we do not find evidence of any special ice-like ordering at the surface of liquid water.     

Continuous improvement of H-mode discharge performance with progressively increasing lithium coatings in the National Spherical Torus Experiment

Lithium wall coatings have been shown to reduce recycling, improve energy confinement, and suppress edge localized modes in the National Spherical Torus Experiment. Here, we show that these effects depend continuously on the amount of predischarge lithium evaporation. We observed a nearly monotonic reduction in recycling, decrease in electron transport, and modification of the edge profiles and stability with increasing lithium. These correlations challenge basic expectations, given that even the smallest coatings exceeded that needed for a nominal thickness of the order of the implantation range.