ANALYSIS OF A PIEZOELECTRIC MULTIMORPH IN EXTENSIONAL AND FLEXURAL MOTIONS

Impedance and admittance matrices are presented for the analysis of the beam-type piezoelectric multimorph (PM). Each piezoelectric layer is polarized in the thickness direction. The stacking sequence can be arbitrary, and both the extensional and flexural motions are considered. The variational principle is used for deriving the lumped conjugate parameters: two mechanical ports for the extensional motion, four mechanical ports for the flexural motion, and m electrical ports for the m piezoelectric layers. The resonance and antiresonance frequencies are then easily calculated from the admittance matrices. For the case of all the piezoelectric layers either in series or parallel connection, them +6 ports reduce to the seven ports, and its impedance and admittance matrices are presented. The present methods are applied to the cantilevered PM and their electromechanical behavior is studied. The tip trajectory of the cantilevered piezomotor is also investigated using the presented matrices. It is found that the present methods are very effective in analyzing the multilayer piezoelectric transducers.     

A simple electronic speckle shearing interferometer

A new speckle shearing interferometer with simple setup is proposed. The interferometer can be converted easily from a speckle referenced speckle pattern interferometer into a speckle shearing interferometer and vice versa. A beamsplitter and a mirror are used to generate the shear. The amount of shear can be adjusted by simply rotating the mirror. The costs involved are low and it is particularly useful for fast inspection in non-destructive testing of structural integrity. Both the theoretical studies of the method of measurement and the experimental results are presented.     

Raman spectroscopy of topotecan, an inhibitor of DNA topoisomerase I

Topotecan (TPT), a water-soluble derivative of camptothecin (inhibitor of human DNA topoiomerase I), has found wide application in cancer chemotherapy. The central problem in using topotecan is the presence of lactone rings in its molecules, which undergo hydrolysis at a physiological pH yielding an inactive and even toxic form of the drug. The analysis of Raman spectra of TPT in H₂O and D₂O solutions made it possible to assign the spectral bands to the vibrations of particular molecular groups. Spectral features indicative of the opening of the lactone rings of the TPT molecules, deprotonation of the hydroxyl groups in their quinoline fragments, and of possible participation of the hydroxyl and carbonyl groups in H bonding are found. The data obtained are necessary to study the molecular mechanisms of TPT-DNA interaction and the formation of ternary complexes between TPT, DNA, and DNA topoisomerase I.     

Black-hole horizon and metric singularity at the brane separating two sliding superfluids

An analogue of a black hole can be realized in the low-temperature laboratory. The horizon can be constructed for “relativistic” ripplons (surface waves) living on the brane. The brane is represented by the interface between two superfluid liquids, ³He-A and ³He-B, sliding along each other without friction. A similar experimental arrangement was recently used for the observation and investigation of the Kelvin-Helmholtz type of instability in superfluids [1]. The shear-flow instability in superfluids is characterized by two critical velocities. The lowest threshold measured in recent experiments [1] corresponds to the appearance of the ergoregion for ripplons. In the modified geometry, this will give rise to the black-hole event horizon in the effective metric experienced by ripplons. In the region behind the horizon, the brane vacuum is unstable due to interaction with the higher-dimensional world of bulk superfluids. The time of the development of instability can be made very long at low temperature. This will allow us to reach and investigate the second critical velocity—the proper Kelvin-Helmholtz instability threshold. The latter corresponds to the singularity inside the black hole, where the determinant of the effective metric becomes infinite.     

Linear nonstationary optical dimensional resonances in atomic nanostructures

The existence of linear nonstationary optical resonances in a diatomic nanostructural object with a dipole-dipole atomic interaction has been proved. A new solution to the joint system of modified Bloch optical equations and nonlocal field equations is obtained for time intervals much shorter than the times of phase and energy relaxation. Formulas for effective polarizabilities of the object’s atoms, which have a set of dimensional resonances, are derived. The frequencies of these resonances significantly differ from the eigenfrequencies of the object’s atoms, and their properties depend on the interatomic distance, light-pulse duration, initial atomic inversions, and the orientation of the object’s axis relative to the direction of incidence of the external light wave.     

Accuracy of Determining Reverberation Parameters during Recovery of a Signal with Reverberation Distortions in the Case of Discrete Delays

We discuss the accuracy of determining reverberation parameters, which is required to recover a signal with reverberation distortions. It is shown that if the signal with distortions is digitized under conditions of the sampling theorem, then it is insufficient to determine the delay time of the retarded signal with an accuracy of the sampling interval. We present an iterative algorithm for determining the reverberation parameters with sufficient accuracy.     

DISCRETE HUYGENS' MODELLING APPROACH TO WAVE PROPAGATIONS IN A HOMOGENEOUS ELASTIC FIELD

The application of the discrete Huygens' modelling has been discussed for acoustic wave propagation problems, in which the scalar wave field problems have been focused. The present paper extends the application of the modelling to the elastic wave propagation in a homogeneous elastic medium in which two types of waves, the longitudinal wave and the shear wave, are independent except at the boundary. Each wave can be treated like a scalar wave until the two waves reach the boundary where they couple so as to satisfy the displacement or stress boundary condition. We propose the approach confining ourselves to the two-dimensional field. Some examples are demonstrated, whose solutions are compared with the vectorial wave modelling and finite difference modelling solutions whenever they are available.     

Laser induced copper electroless plating on polyimide with Q-switch Nd:YAG laser

The results of laser induced deposition of copper on polyimide substrate from copper electrolyte solution are reported. Unlike most work reported in the literatures where CW Ar⁺ lasers were used, a second harmonic (532 nm wavelength) Q-switch Nd:YAG laser was used for our experiments. The deposition process was conducted by laser-catalyzing of the polyimide surface and subsequent photothermal-accelerated reduction of copper-complex ions in an alkaline reducing environment. The characteristics of the deposited copper line were investigated in terms of laser beam scanning speed, and the number of scans. The surface morphology and chemical composition of the deposited copper were analyzed using field emission scanning electron microscope (FESEM) and energy dispersive spectrometer (EDX). The optimum processing conditions have been identified. The copper deposit was found to adhere well to the substrate.