THE USE OF THERMOELASTICITY TO EVALUATE STRESS REDISTRIBUTION AND NOTCH SENSITIVITY IN CERAMIC MATRIX COMPOSITES

Thermoelastic stress analysis was used to document the effect of composite damage on the stress distribution in three ceramic matrix composites. Composite damage was found to significantly alter the thermoelastic response of each material, with the greatest effect noted in SiC/CAS. Thermoelastic imaging of these materials affords a more complete picture of how the various damage mechanisms affect the stress distribution. In particular, a stress concentration factor computed from thermoelastic images, serves as an indicator of stress redistribution. The stress concentration factors were computed by comparing notch root to far field temperatures, and monitored after the introduction of various amounts of damage. In each material, the stress concentration factor diminished as the damaging load approached the ultimate stress. Reduction in the stress concentration is associated with local changes in modulus, mechanistically arising from combinations of fiber, matrix and interface fracture. Stress redistribution occurs as a consequence of modulus changes, leading to lower notch sensitivity in each of the tested composites.     

The amplitude and phase of a transmission holographic grating due to four-wave interaction in a photorefractive medium

Based on a previously developed two-level model of four-wave interaction in photorefractive crystals, expressions for the amplitude and phase of a transmission holographic grating have been obtained. The analysis of these expressions points to the dependence of both the amplitude and the phase of the grating on the intensity of the readout beam.     

Aqueous solution and solid state interactions of lanthanide ions with a methacrylic ester polymer bearing pendant 15‐crown‐5 moieties

The interaction between trivalent lanthanide ions and poly(1,4,7,10,13‐pentaoxacyclopentadecan‐2‐yl‐methyl methacrylate), PCR5, in aqueous solution and in the solid state have been studied. In aqueous solution, evidence of a weak interaction between the lanthanides and PCR5 comes from the small red shift of the Ce(III) emission spectra and the slight broadening of the Gd(III) EPR spectra. From the Tb(III) lifetimes in the presence of H₂O and D₂O the loss of one or two water coordinated molecules is confirmed when Tb(III) is bound to PCR5. An association constant of the order of 200 M^?1 was obtained for a 1:1 (lanthanide:15‐crown‐5) complex from the shift of the polymer NMR signals induced by Tb(III). A similar association constant is obtained from the differences of the molar conductivity of Ce(III) solution at various concentrations in presence and absence of PCR5. When Tb(III) is adsorbed on PCR5 membranes, lifetime experiments in H₂O and D₂O confirm the loss of 5 or 6 water coordinated molecules indicating that in solid state the lanthanide(III)‐PCR5 interaction is stronger than in solution. The adsorption of Ce(III) in PCR5 membranes shows a Langmuir type isotherm, from which an equilibrium constant of 39 M^?1 has been calculated. SEM shows that the membrane morphology is not much affected by lanthanide adsorption. Support for lanthanide ion–crown interactions comes from ab initio calculations on 15‐crown‐5/La(III) complex. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1788–1799, 2007     

Letters to the Editor

The Mathematical Intelligencer encourages comments about the material in this issue. Letters to the editor should be sent to either of the editors-in-chief, Chandler Davis or Marjorie Senechal.     

Nonlinear optical properties of regioregular main‐chain polyesters

We have prepared new polyesters containing quadratic, nonlinear optical (NLO) active chromophores covalently incorporated into the main chain. In these polymers, the sequence of the chromophore units along the main chain is rigorously head to tail. All the polyesters are processable, both in the melt and in solution. For one polyester, a full second‐order NLO characterization has been performed. An out‐of‐resonance d₃₃ coefficient of 21 pm/V at 1368 nm has been measured. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2719–2725, 2007     

Degradative chain transfer in vinyl acetate polymerizations using toluene as solvent

In this work, we propose that retardation in vinyl acetate polymerization rate in the presence of toluene is due to degradative chain transfer. The transfer constant to toluene (C_trs) determined using the Mayo method is equal to 3.8 × 10^?3, which is remarkably similar to the value calculated from the rate data, assuming degradative chain transfer (2.7 × 10^?3). Simulations, including chain‐length‐dependent termination, were carried out to compare our degradative chain transfer model with experimental results. The conversion–time profiles showed excellent agreement between experiment and simulation. Good agreement was found for the M_n data as a function of conversion. The experimental and simulation data strongly support the postulate that degradative chain transfer is the dominant kinetic mechanism. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3620–3625, 2007     

Glass transitions and mixed phases in block SBS

Differential scanning calorimetry (DSC) does not allow for easy determination of the glass‐transition temperature (T_g) of the polystyrene (PS) block in styrene–butadiene–styrene (SBS) block copolymers. Modulated DSC (MDSC), which deconvolutes the standard DSC signal into reversing and nonreversing signals, was used to determine the (T_g) of both the polybutadiene (PB) and PS blocks in SBS. The T_g of the PB block was sharp, at ?92 °C, but that for the PS blocks was extremely broad, from ?60 to 125 °C with a maximum at 68 °C because of blending with PB. PS blocks were found only to exist in a mixed PS–PB phase. This concurred with the results from dynamic mechanical analysis. Annealing did not allow for a segregation of the PS blocks into a pure phase, but allowed for the segregation of the mixed phase into two mixed phases, one that was PB‐rich and the other that was PS‐rich. It is concluded that three phases coexist in SBS: PB, PB‐rich, and PS‐rich phases. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 276–279, 2005     

Structure of norbornene-fused 3,1-oxazine double cycloadducts

Pentacyclic isoxazolines were obtained by the cycloaddition of benzonitrile oxide to norbornene-azetidinone-fused 3,1-oxazines. The constitutions of two of the isomers obtained, and the configurations and conformations of all products, were determined by means of ¹H and ¹³C NMR spectroscopy and DNOE experiments.     

Galactic model of element formation

A cosmological model is presented that produces He, C, O, D, Li, Be, and B in their observed abundances without a Big Bang. The elements are produced during the 1.5-Gy formation period of a galaxy, with C, O, and other heavy elements produced by stars of M>12 M₃ , He by stars of 6 M_s<M<12 M_s, and D, Li, Be, and B by cosmic-ray reactions in a nearly pure H plasma halo. Thus, the model shows that the major elements used in astrophysical studies can be produced during galactic formation by exactly the same processes known to function today at much lower rates