THE FIRST EXPERIMENT OF A THz GYROTRON WITH A PULSE MAGNET

A THz gyrotron with a pulse magnet has been designed, constructed and operated in FIR FU. It is developed as one of high frequency gyrotrons included in Gyrotron FU Series. The gyrotron has already achieved the first experimental result for high frequency operations whose radiation frequency exceeds 1 THz. In this paper, the design detail and the operation test results for sub-terahertz to terahertz range are described. The second harmonic operation is confirmed experimentally at the expected frequency of 1.005 THz due to TE_6,11 cavity mode at the magnetic field intensity of 19.0 T.     

Excess noise peaks in porous silicon-based diode structures

Results of an experimental observation of the voltage oscillations associated with a discrete tunneling of holes in porous silicon at room temperature are presented. The noise characteristics of diode structures with a porous silicon interlayer formed on heavily boron-doped silicon single crystals are studied. Peaks of excessive noise are observed at frequencies of ～1 MHz, at which single-electron oscillations should be expected. The peak noise power is found to increase with current according to the ～2.5 power law and, at a current density of 0.15 A/cm², to exceed the noise power of the receiver by three to four orders of magnitude. The complex shape of the noise spectrum and its extension to the higher frequency region with increasing current are explained by the three-dimensionality of the system of nanometer-sized silicon grains embedded in insulating silicon dioxide of porous silicon.     

Phase modulation of the signal beam in three-wave forward mixing in photorefractive bismuth silicon oxide

The interaction of three forward beams in a BSO crystal is investigated under conditions when the two pump beams are anti-symmetrically detuned and the signal beam is phase modulated. For sinusoidal phase modulation the signal gain is shown to be dependent on the instantaneous frequency detuning. Single and double maxima in gain are obtained depending on the voltage amplitude applied to the piezoelectric mirror. For triangular phase modulation a slight asymmetry is found in the gain versus detuning curve.     

A model for a uniform steady-state vacuum arc with a hot anode

A model is formulated and evaluated for a Uniform electrical discharge sustained in vapor evaporated from an arc-heated anode. The plasma potential is positive with respect to both the cathode and anode. For a Cu anode, the anodic vapor dominates the plasma for current densities exceeding 8 kA/m². The anode heating potential is approximately 6.5 V, and the dominant cooling mechanism is evaporation for current densities exceeding 20 kA/m². Over the range 10 to 10000 kA/m², the electron density increases from 8×10¹⁷ to 5×10²³ m^-3, while the ionization fraction rises from 0.3% to 4%. At the lower end of this current range the electrical resistivity of 4 mΩ-m is determined primarily by electron-neutral collisions, while with increasing current the resistivity decreases to 0.7 mΩ-m, with electron-ion collisions contributing an equal share. This hot-anode vacuum arc may have potential for industrial application as a macroparticle-free high-deposition-rate coating source     

A note on the Lyapunov equation for discrete linear systems in Hilbert space

It is given a simple and unified new proof for the following well-known stability condition: an infinite-dimensional time-invariant discrete linear system is uniformly asymptotically stable if and only if the associate Lyapunov equation has a unique strictly positive solution. The proof is partially based on an application of Rota's model construction technique.     

High resolution electronic study of ONO, ONO and ONO: A rovibronic survey covering 11 800-14 380 cm

The 11 800-14 380 cm⁻¹ frequency range has been scanned for rotationally resolved rovibronic transitions in the A²B₂-X²A₁ electronic band system of the symmetric (C_2v) ¹⁶O¹⁴N¹⁶O and ¹⁸O¹⁴N¹⁸O isotopologues and in the corresponding electronic band system of the asymmetric (C_s) ¹⁸O¹⁴N¹⁶O isotopologue. The rotational analysis—reflecting minor differences in mass—in combination with symmetry induced spectral differences allows an identification of 68 ¹⁶O¹⁴N¹⁶O vibronic levels, 26 ¹⁸O¹⁴N¹⁸O vibronic levels and 51 ¹⁸O¹⁴N¹⁶O vibronic levels. The bands are recorded using near infrared fluorescence spectroscopy and a piezo valve based pulsed molecular beam expansion of premixed ¹⁸O₂ and ¹⁴N¹⁶O in Ar. The majority of the observed bands is rotationally assigned and can be identified as transitions starting from the vibrational ground state of one of the isotopologues. Numerous hot bands have also been identified. A comparison of the overall spectroscopic features of C_2v vs. C_s symmetric species provides qualitative information on symmetry dependence of vibronic couplings.     

Slow positron beam study of corrosion-related defects in pure iron

Corrosion-related defects of pure iron were investigated by measuring Doppler broadening energy spectra (DBES) of positron annihilation and positron annihilation lifetime (PAL). Defect profiles of the S-parameter from DBES as a function of positron incident energy up to 30 keV (i.e. ∼1 μm depth) were analyzed. The DBES data show that S-parameter increases as a function of positron incident energy (mean depth) after corrosion, and the increase in the S-parameter is larger near the surface than in the bulk due to corrosion. Furthermore, information on defect size from PAL data as a function of positron incident energy up to 10 keV (i.e. ∼0.2 μm depth) was analyzed. In the two-state trapping model, the lifetime τ₂ = 500 ps is ascribed to annihilation of positrons in voids with a size of the order of nanometer. τ₁, which decreases with depth from the surface to the bulk, is ascribed to the annihilation of positrons in dislocations and three-dimensional vacancy clusters. The corroded samples show a significant increase in τ₁ and the intensity I₂, and near the surface the corroded iron introduces both voids and large-size three-dimensional vacancy clusters. The size of vacancy clusters decreases with depth.