Reactivity of a Ti–45.9Al–8Nb alloy in air at 700–900°C

A Ti–45.9Al–8Nb (at%) alloy with a lamellar structure (γ+α₂) was oxidised in air at 700, 800, 850 and 900°C in isothermal and thermal cycling conditions. The reaction progress was followed by thermogravimetric measurements. In isothermal conditions the oxidation kinetics followed approximately a parabolic rate law and the rate constants ranged from about 10^–12 kg² m^–4 s^–1 at 700°C to 10^–10 kg² m^–4 s^–1 at 900°C. The oxide scales were built of Al₂O₃ and TiO₂, the former being the main component of the outermost layer. The oxidation behaviour of Ti–45.9Al–8Nb was referred to a commercial titanium alloy, WT4 (Ti–6Al–1Mn), and selected oxidation-resistant alloys.     

Complex morphology of melt-spun nylon-6 fibres investigated by 1H double-quantum-filtered NMR spin-diffusion experiments.

The complex morphology of high-speed melt-spun nylon-6 fibres hydrated with D2O was investigated using 1H double-quantum-filtered spin-diffusion NMR experiments. The magnetisation exchange from selected crystalline domains along the fibrils and interfibrils was simulated with the help of a three-dimensional solution of a spin-diffusion equation approximated by a product of one-dimensional analytical NMR signals, which correspond to a lamellar morphology. This allows to measure the sizes of crystalline and less-mobile amorphous domains along the fibrils, as well as the diameter of the fibrils and interfibril distances. A series of nylon-6 fibres with extreme values of winding speed and draw ratio was investigated. The changes detected in the domain size along the fibrils and interfibrils show the same trend in the data obtained from wide-angle X-ray diffraction and small-angle X-ray scattering.     

Slow-light enhanced optical detection in liquid-infiltrated photonic crystals

Slow-light enhanced optical detection in liquid-infiltrated photonic crystals is theoretically studied. Using a scattering-matrix approach and the Wigner–Smith delay time concept, we show that optical absorbance benefits both from slow-light phenomena as well as a high filling factor of the energy residing in the liquid. Utilizing strongly dispersive photonic crystal structures, we numerically demonstrate how liquid-infiltrated photonic crystals facilitate enhanced light–matter interactions, by potentially up to an order of magnitude. The proposed concept provides strong opportunities for improving existing miniaturized absorbance cells for optical detection in lab-on-a-chip systems.     

Reverse micellar synthesis and properties of nanocrystalline GMR materials (LaMnO3, La0.67Sr0.33MnO3 and La0.67Ca0.33MnO3): Ramifications of size considerations

Nanoparticles of complex manganites (viz. LaMnO₃, La_0.67Sr_0.33MnO₃ and La_0.67Ca{0.33}MnO₃) have been synthesized using the reverse micellar route. These manganites are prepared at 800‡C and the monophasic nature of all the oxides has been established by powder X-ray diffraction studies. TEM studies show an average grain size of 68, 80 and 50 nm for LaMnO₃, La_0.67Sr_0.33MnO₃ and La_0.67Ca{0.33}MnO₃respectively. Ferromagnetic ordering is observed at around 250 K for LaMnO₃, 350 K for La_0.67Sr_0.33MnO₃ and 200 K for La_0.67Ca{0.33}MnO₃. These Curie temperatures correspond well with those reported for bulk materials with similar composition.     

Increase of refractive index induced by absorbing centres

An analytical expression of the complex permittivity is derived for absorbing centres featuring inhomogeneous absorption-line broadening. Such an expression gives the dispersion law of the real part of the permittivity when the imaginary part has a Gaussian lineshape. Our mathematical approach starts from an overlap integral of Lorentzian-type dielectric susceptibilities weighted by a Gaussian probability distribution of the resonance absorption energies. The analytical solution found is consistent with the Kramers–Kronig relation. We demonstrate that, like in the case of homogeneous absorption-line broadening, the refractive index increases at photon energies lower than the resonance absorption energy also for inhomogeneous absorption-line broadening; if the absorbing centres emit Stokes-shifted radiation, such an increase can be exploited for passive and active waveguiding applications. An example is reported regarding active waveguides based on colour centres in a lithium fluoride crystal.     

FexNi100−x nanometric films deposited by laser ablation on SiO2/Si substrates

Fe_xNi_100−x nanometric films were deposited on SiO₂/Si substrates at room temperature using the pulsed laser deposition technique. The targets were Fe-Ni amorphous magnetic foils with composition Fe₅₀Ni₅₀, Fe₃₅Ni₆₅ and Fe₂₂Ni₇₈. Morphological and structural properties of the deposited films were investigated using scanning electron microscopy, Rutherford backscattering spectrometry, grazing incidence X-ray diffraction, and X-ray reflectivity. Electrical and magnetic characteristics of the films were investigated by using the four-point probe and the magneto-optic Kerr effect techniques, respectively. The film properties are strictly dependent on the Fe-Ni compositional ratio.     

Thickness dependence of free‐standing thin films

Below a critical thickness, of about 60 nm, the glass transition temperature of polystyrene (PS) films decreases with film thickness, as demonstrated using free‐standing films. A geometrical model is developed here describing this phenomenon in the case of ideal (Gaussian) chains. This model, which can be considered as an application of the free volume model, assumes that the decrease of the glass transition temperature from thick to ultrathin films is due to the modification of the interpenetration between neighboring chains. The theoretical curve deduced from the model is in excellent agreement with the PS experimental results, without using any adjustable parameters. From these results, it can be concluded that new chain motions, usually buried in bulk samples, are expressed by the presence of the surface. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 10–17, 2007     

Fluorine incorporation in silica glass by the MCVD process: Study of fluorine incorporation zone,evaluation of optical properties and structure of the glass

A theoretical approach was made to find out a complete fluorine incorporation zone on a ternary diagram which serves as a useful graphical representation to select the flows of the supplied reagents for incorporation of the suitable amount of fluorine into cladding glass of optical fiber preform made by the MCVD process using CCl₂F₂ as a source of fluorine under oxygen abundance, oxygen deficiency and intermediate oxygen state conditions. The possible mechanism for incorporation of fluorine into cladding glass of optical fiber is also evaluated on the basis of the thermodynamical data. The fluorine incorporation mechanism in silica glass by the MCVD process is found to be dependent on the CCl₂F₂/SiCl₄ ratio in the input gas mixture. Fluorine doping is found to be effective for removing the strained Si–O–Si bonds, which govern the optical transparency in deep ultra-violet (DUV) and vacuum ultra-violet (VUV) regions. The maximum refractive index depression of ?0.5 × 10^?3 is obtained with incorporation of fluorine into silica cladding glass by the MCVD process using CCl₂F₂ as a dopant precursor with suitable flow of SiCl₄ vapor along with O₂ through backward deposition pass. The structure of fluorine doped silica glass preform samples containing 1.70–1.79 mol% fluorine incorporated by the MCVD process based on the analyses of ¹⁹F MAS spectra done by high-resolution ¹⁹F NMR spectroscopy reveal the presence of two distinct types of fluorine environments. The majority of the fluorine environments are formed in SiO_1.5F polyhedral and less abundant species is observed to be highly unusual, yielding a fivefold coordinated silicon of the type SiO₂F polyhedral which become increased with increasing the fluorine content.     

Circular dichroism spectra of langasite family crystals in the range of electronic transitions of structure defects

The absorption and circular dichroism spectra of langasite family crystals are studied. Wide bands in the range of 285–500 nm that are related to the structure lattice defects are found. For all the crystals, these bands are in approximately the same spectral region, have identical structures, and can be attributed to one type of defects formed by cation vacancies and excess oxygen atoms in the optically active positions.