Synthesis and Application of Disperse Dyes Based on 2-Aminothiazole Derivatives

A series of novel monoazo disperse dyes based on 2-amino-5-nitro-4-(p-nitrophenyl)thiazole were prepared using various N,N-dialkylaniline derivatives as the coupling components. The spectral properties in the IR and visible range of the dyes were investigated. The dyeing performance of these dyes was assessed on nylon fabric. These dyes were found to give a wide range of color shades from reddish brown to indigo with excellent brightness, levelness, and depth on nylon fabric. The dyed fabric showed fairly good light fastness, good to excellent fastness to wash and perspiration, and excellent fastness to sublimation. The dyebath exhaustion and fixation of the dyes on nylon were found to be very good and acceptable.     

Partial molar volume and solvation structure of naphthalene in supercritical carbon dioxide: a Monte Carlo simulation study

Monte Carlo simulations were used to investigate the solvation of naphthalene in supercritical carbon dioxide at a temperature of 308.38 K just above the solvent's critical temperature and at pressures of 74.6, 79.7, 87.8, and 310.2 bar covering a range from just below to far above the solvent's critical pressure and at a slightly elevated temperature of 318.15 K and a pressure of 93.0 bar. The Monte Carlo simulations were carried out in the isobaric-isothermal ensemble and employed the transferable potentials for phase equilibria (TraPPE) force field. Systems containing 2000 carbon dioxide molecules and from 0 to 4 solute molecules were used for all five state points, and additional simulations with 16 000 solvent molecules were carried out at the lower temperature and p = 79.7 bar. In agreement with experiment, the simulations yield large, negative partial molar volumes of naphthalene near the critical pressure at 79.7 bar, with values of -4340 +/- 750 and -3400 +/- 620 cm(3) mol(-1) for the 2000 and 16 000 molecule systems, respectively. Structural analysis through radial distribution functions and the corresponding number integrals yields good agreement with neutron diffraction data and shows evidence for a long-range density enhancement around solutes but lacking any specific solute-solvent clustering. Solvatochromic shifts estimated from the local solvent structure correlate well with the experimental data over the entire pressure range.     

AFM characterization of nanoscale ribbons grown from a series of oligo(p-phenyleneethynylene) derivatives

The key to optimizing the properties of molecular scale wires lies in understanding and controlling the solid-state morphologies. This paper examines the influence of oligomer chain length, solvent, and concentration on the formation of nanoscale ribbons on mica substrates from solutions of oligo(p-phenyleneethynylene)s (OPEs) with hexyloxy side chains and thioacetyl end groups. The OPEs are of different molecular chain lengths, in which the numbers ofp-dihexyloxyphenyleneethynylene repeat units, n, are 1, 3, 5, and 7, respectively, with their two ends capped with 4-thioacetylphenyl alligator groups. The atomic force microscope (AFM) is employed to investigate the thin film morphology and study the self-assembled organizations. Solvent and concentration are found to exert a strong influence on thin film morphology. Under suitable conditions, OPEs with 7 p-dihexyloxyphenyleneethynylene repeat units are driven to form micrometer-long nanoribbons, oriented preferably along the 3-fold symmetry axes of the mica substrate. The cross section of the nanoribbons is composed of 7 molecules as evaluated by AFM characterization. On the other hand, oligomers with shorter chain lengths (n = 1, 3, and 5) produce thin films featuring globular nanoaggregates, chains consisting of elongated grains, and rods, respectively. Plausible reasons for the variation in thin film morphology are discussed, based on the results obtained from investigation of oligomer chain length, solvent, and concentration effects. A subtle balance among molecular size and physicochemical properties of solute molecules, solvent molecules, and substrate is crucial for the formation of desired structures. Among them, oligomer chain length plays a key role in thin film morphology, and the critical number of repeat units in OPE/poly(p-phenyleneethynylene) molecules for the formation of nanoribbon structures with a molecular cross section is supposed to be 8 or 9.     

Insertion of a small peptide of six amino acids into the β7–β8 loop of the p51 subunit of HIV-1 reverse transcriptase perturbs the heterodimer and affects its activities

Background  

HIV-1 RT is a heterodimeric enzyme, comprising of the p66 and p51 subunits. Earlier, we have shown that the β7-β8 loop of p51 is a key structural element for RT dimerization (Pandey et al., Biochemistry 40: 9505, 2001). Deletion or alanine substitution of four amino acid residues of this loop in the p51 subunit severely impaired DNA binding and catalytic activities of the enzyme. To further examine the role of this loop in HIV-1 RT, we have increased its size such that the six amino acids loop sequences are repeated in tandem and examined its impact on the dimerization process and catalytic function of the enzyme.     

The synthesis of pyrazino[2,3-d]pyridazine and some of its derivatives

Pyrazino[2,3-d]pyridazine (I) was synthesized by two different routes. 5, 8-Dihydroxy-pyrazino[2, 3-d]pyridazine (IV) was converted to 5, 8-dichloropyrazino[2, 3-d]pyridazine (V) and 5, 8-dibromopyrazino[2, 3-d]pyridazine (Va). When V was treated with various benzyl mercaptans and alkoxides the corresponding disubstituted derivatives were obtained. Compound V when allowed to react with aromatic amines gave 5, 8-bisamino-pyrazino[2,3-d]pyridazines, however, with aliphatic amines only mono substituted products were obtained substituted in the 8-position. The reaction of pyrazine-2, 3-dinitrile with hydrazine gave 5, 8-diaminopyrazino[2, 3-d]pyridazine (X).     

The investigation of cancerous human bone (osteoclastoma) by small-angle X-ray scattering

Small-angle X-ray scattering methods were applied to provide a pore analysis of cancerous human bone (osteoclastoma). For experimental measurements of the scattering intensities a small-angle Kratky camera, equipped with a counterattachment and a programmable step-scanning device, was used. By applying the theories of Kratky, Porod, Debye, and Bueche, applicable to a densely packed two-phase system belonging to a general micelle system, macromolecular parameters such as specific inner surface, length of coherence, range of inhomogeneity, void percentage, and transversal lengths l?₁ and l?₂ were evaluated and found to be 4.69 × 10^?4 Å^?1, 21.39 Å, 18.01 Å, 0.21%, 18.01 Å and 8.53 × 10³ Å, respectively. A comparison of these parameters with those of pure human bone revealed a macromolecular dissociation in osteoclastoma.     

Synthesis and thermal study of polyamides and polyaspartimides

Copolymers were synthesized by polyaddition reactions of aromatic diamine (4,4′-sulphonyl dianiline) and aliphatic diamines (1,2-diaminoethane and 1,3-diaminopropane) with N,N′-arylenebismaleimides (N,N′-m-phenylene-N,N′-p-phenylene-, and N,N′-benzidine-). They were characterized by elemental analysis, i.r. spectra and viscosity. The thermal behaviour of copolymers was studied using Thermogravimetric Analysis (TGA). All the copolymers are stable up to 270°. Polyamides are less stable than polyaspartimides.     

Radical addition of RFI to alkenylsuccinic anhydrides and gem-substituted alkenyl triesters : Zinc and radical induced, or spontaneous radical cyclization, of the δ-iodoalkanoic esters to γ-lactones

Radical addition of R_FI to alkenylsuccinic anhydrides affords ω-(perfluoroalkyl)-δ-iodoalkyl-2-butane-1,4-dioc acid anhydrides, and these adducts are reductively dehalogenated and esterified by zinc and acid in ethanol without lactonization. However, the R_FI adducts react with KOH in ethanol to give the alkenyl half esters (but no γ-lactone), which convert to the γ-lactones by acid catalysis. When treated with water, ethanol, Zn and 48% HBr, the R_FI adduct from but-3-en-2-yl-succinic anhydride converts to the iodo half ester, R_FCH₂CHICH(CH₃)CH(CO₂H)CH₂CO₂Et, which undergoes Zn induced (S_Hi) conversion to γ-lactone. R_FI (AIBN) and the triester CH₂CHCH₂C(CO₂Et)₂CH₂CO₂Et yield R_FCH₂CHICH₂C(CO₂Et)₂CH₂CO₂Et (95%). When heated to 140 °C, the adduct loses iodoethane.and cyclizes to diester γ-lactones (94%). With benzoyl peroxide, R_FI and the triester at 99 °C, spontaneous radical cyclization of the adduct to lactone occurs. Evidently, the gem-disubstituted triester readily forms a five-membered lactone as a consequence of steric compression in the open chain form.     

A new spectrophotometric method for the determination of total and ferric iron in rain water at the ppb level

A new, simple, selective and sensitive spectrophotometric procedure for the on-site quantification of iron at nano-gram levels in atmospheric precipitations, i.e. rain as sample source is described. It is based on the color reaction of Fe3+ with SCN- ions in the presence of a cationic surfactant, i.e. cetylpyridinium chloride (CPC), in strong HCl solution, and subsequent extraction of the complex with N-octylacetamide into toluene or chloroform. The apparent molar absorptivity of the complex is 2.60 x 10(5) L mol(-1) cm(-1) at lambdamax = 480 nm at an enrichment factor (EF) of 10. The detection limit (causing higher absorbance than the sum of the blank absorbance (0.009) and 3 SD) is 5 ng mL(-1) Fe. Ions commonly associated with iron did not interfere in the present method. The effect of analytical variables, i.e. amount and type of the reagents, acidity, solvent, temperature, dilution, etc., in the determination of iron are discussed. The validity of the present method is checked with GF-AAS. The method has been applied to the determination of iron at the ppb level in rain water samples.     

Dynamics of magnesium-bicarbonate interactions

The complexation kinetics of Mg²⁺ with CO ₃ ⁼ and HCO ₃ ^? has been studied in methanol and water by means of the stopped-flow and temperature-jump methods. Kinetic parameters were obtained in methanol by coupling the magnesium-carbonato reactions with the metal-ion indicator Murexide. Relatively high stability constants were found in methanol (K=1.0×10⁵ liters-mole^?1 for Mg²⁺-Murexide,K=7.0×10⁴ liters-mole^?1 for Mg²⁺?HCO ₃ ^? , andK=2.0×10⁵ for Mg²⁺?CO ₃ ⁼ liters-mole^?1). The corresponding, observed formation rate constants were determined to be $$\begin{gathered} k_f = 4.0 \times 10^6 M^{ - 1} - sec^{ - 1} (Mg^{2 + } - Murexide) \hfill \\ k_f = 5.0 \times 10^5 M^{ - 1} - sec^{ - 1} (Mg^{2 + } - HCO_3^ - ) \hfill \\ k_f = 6.8 \times 10^5 M^{ - 1} - sec^{ - 1} (Mg^{2 + } - CO_3^ = ) \hfill \\ \end{gathered} $$ The relaxation times were found to be much shorter (τ≈5–20 μsec) in aqueous solutions, primarily due to the relatively high dissociation rate constants. The data could be interpreted on the basis of a coupled reaction scheme in which the protolytic equilibria are established relatively rapidly, followed by a single relaxation process due to the formation of MgHCO ₃ ⁺ and MgCO₃ between pH 8.7 and 9.3. The observed formation rate constants were determined to be $$\begin{gathered} k_f = 5.0 \times 10^5 M^{ - 1} - sec^{ - 1} (Mg^{2 + } - HCO_3^ - ) \hfill \\ k_f = 1.5 \times 10^6 M^{ - 1} - sec^{ - 1} (Mg^{2 + } - CO_3^ = ) \hfill \\ \end{gathered} $$ These results, in conjunction with NMR solvent exchange rate constants, are analyzed in terms of a dissociative (S _N1) mechanism for the rate of complex formation. The significance of these kinetic parameters in understanding the excess sound absorption in seawater is discussed.