Synthesis of nanoparticles of the giant dielectric material,CaCu<Subscript>3</Subscript>Ti<Subscript>4</Subscript>O<Subscript>12</Subscript> from a precursor route

A complex oxalate precursor, CaCu₃(TiO)₄(C₂O₄)₈·9H₂O, (CCT-OX), was synthesized and the precipitate that obtained was confirmed to be monophasic by the wet chemical analyses, X-ray diffraction, FTIR absorption and TG/DTA analyses. The thermal decomposition of this oxalate precursor led to the formation of phase-pure calcium copper titanate, CaCu₃Ti₄O₁₂, (CCTO) at ≥680°C. The bright-field TEM micrographs revealed that the size of the as synthesized crystallites to be in the 30–80 nm range. The powders so obtained had excellent sinterability resulting in high density ceramics which exhibited giant dielectric constants upto 40000 (1 kHz) at 25°C, accompanied by low dielectric losses, <0.07.     

Difference equation method of analysing isothermal thermogravimetric data

Difference equation method has been suggested to evaluate the kinetic parameter of the degradation of polymers under isothermal condition. The method is simple and applicable to degradation process for any value ofn, the reaction order. By using one simple method all the kinetic parameters cannot be obtained in other methods only by difference equation.The authors wish to express their sincerest thanks to Prof. R. P. Rastogi, Head of the Chemistry Department, for providing the necessary facilities and constant encouragement. One of the authors (J. D.) wishes to express her thanks to CSIR (India) for financial support and a fellowship.     

Fluorescence Assay Based on Aptamer-Quantum Dot Binding to <Emphasis Type="Italic">Bacillus thuringiensis</Emphasis> Spores

A novel assay was developed for the detection of Bacillus thuringiensis (BT) spores. The assay is based on the fluorescence observed after binding an aptamer-quantum dot conjugate to BT spores. The in vitro selection and amplification technique called SELEX (Systematic Evolution of Ligands by EXponential enrichment) was used in order to identify the DNA aptamer sequence specific for BT. The 60 base aptamer was then coupled to fluorescent zinc sulfide-capped, cadmium selenide quantum dots (QD). The assay is semi-quantitative, specific and can detect BT at concentrations of about 1,000 colony forming units/ml.     

Turbulent shock waves in a collisionfree plasma

The paper deals with the structure of collisionless shocks arising from turbulent wave-particle interactions. The conditions under which wave-particle interaction effects could become significant leading to growing waves and a shock are discussed. Using the Mott-Smith expression for the zero-order distribution functions for the ions within the shock, the dielectric constant as well as the integral representing the wave-particle interaction term in the Lenard-Balescu equation are evaluated for a collisionless plasma. An expression is given for the ion distribution function within the shock. It is shown that the component of the pressure tensor perpendicular to the direction of flow of the plasma leads to a new kind of viscosity term arising from the interaction of the particles with the growing waves and this provides a dissipative mechanism to account for the conversion of the kinetic energy of the incoming plasma into the thermal energy of the hot ionised gas behind the shock.     

Thermodynamics of Chromium(VI) Anionic Species Sorption onto Surfactant-Modified Montmorillonite Clay

Batch sorption experiments performed on Cr(VI) species sorption showed a significantly enhanced removal of inorganic hexavalent chromium anionic species from aqueous solution by montmorillonite clays modified with quaternary amine, hexadecyltrimethylammonium (HDTMA) bromide. Unmodified clay had no affinity for chromium(VI) species. The sorption of Cr(VI) species has been carried out as a function of pH, contact time, adsorbate concentration (4.14x10(-5) to 8.62x10(-3) M), and temperature (5-45 degrees C). The surfactant-modified clay surface was stable when exposed to extremes in pH. The optimum pH for maximum sorption of Cr(VI) species was found to be at pH 1 and was constant between pH 2 and pH 6. The sorption data obtained was well described by DKR and Langmuir sorption isotherms. Sorption energy (E) for (i) surfactant sorption by montmorillonite clay and (ii) sorption of chromium(VI) species by surfactant modified clay have been computed from the DKR equation. Sorption energy evaluated for the sorption of both surfactant and Cr(VI) species showed that an ion-exchange mechanism was operative. The mechanism of retention appears to be replacement of counterion of the surfactant by Cr(VI) anionic species. Adsorbent capacity for the sorption of Cr(VI) species has been evaluated from the Langmuir sorption isotherm data. Thermodynamic parameters (Delta H degrees, Delta S degrees and Delta G degrees ) for surfactant sorption on montmorillonite clay and Cr(VI) sorption by modified clay have been evaluated. The specific rate constant for sorption of Cr(VI) species on modified montmorillonite was rapid during the first 10 min and equilibrium was found to be attained within 30 min. The sorption of Cr(VI) species onto modified montmorillonite clay followed first-order rate kinetics. Copyright 2000 Academic Press.     

Cellular uptake,localization and photodynamic effects of haematoporphyrin derivative in human glioma and squamous carcinoma cell lines

Uptake, intracellular concentration, localization and photodynamic effects of a haematoporphyrin derivative (HpD, Photosan-3) were compared in human glioma (BMG-1, wild-type p53) and squamous carcinoma (4451, mutated p53) cell lines. Concentration and time dependence of cellular uptake of HpD was assayed from methanol extracts and whole cell suspension spectroscopy, while localization was studied by fluorescence microscopy-based image analysis. Colony-forming ability, apoptosis, cell-cycle progression and cytogenetic damage (micronuclei formation) were investigated as parameters of photodynamic response following irradiation with red light. BMG-1 cells were more sensitive to the photodynamic treatment than 4451 cells, although the 4451 cells accumulated a higher amount of HpD and did not differ significantly from BMG-1 cells with respect to intracellular localization. Photodynamically-induced cytogenetic damage and apoptosis were considerably higher in BMG-1 cells as compared to 4451 cells. The present results strongly suggest that manifestation of the photodynamically-induced lesions in the form of cytogenetic damage and apoptosis are among the important determinants of cellular sensitivity to HpD-PDT besides the photodynamic dose (intracellular concentration of the photosensitizer and the light dose).     

Nanoparticles of the giant dielectric material, CaCu3Ti4O12 from a precursor route

A method of preparing the nanoparticles of CaCu₃Ti₄O₁₂ (CCTO) with the crystallite size varying from 30 to 200 nm is optimized at a temperature as low as 680 °C from the exothermic thermal decomposition of an oxalate precursor, CaCu₃(TiO)₄(C₂O₄)₈·9H₂O. The phase singularity of the complex oxalate precursor is confirmed by the wet chemical analyses, X-ray diffraction, FT-IR and TGA/DTA analyses. The UV-vis reflectance and ESR spectra of CCTO powders indicate that the Cu(II) coordination changes from distorted octahedra to nearly flattened tetrahedra (squashed) to square-planar geometry with increasing annealing temperature. The HRTEM images have revealed that the evolution of the microstructure in nanoscale is related to the change in Cu(II) coordination around the surface regions for the chemically prepared powder specimens. The nearly flattened tetrahedral geometry prevails for CuO₄ in the near surface regions of the particles, whereas square-planar CuO₄ groups are dominant in the interior regions of the nanoparticles. The powders derived from the oxalate precursor have excellent sinterability, resulting in high-density ceramics which exhibited giant dielectric constants upto 40,000 (1 kHz) at 25 °C, accompanied by low dielectric loss <0.07.     

Laser Raman Investigation of Solid State Rearrangement of bis(O-lodobenzoyl) peroxide into 1-(2'-Iodobenzoyloxy)-1, 2-benziodoxolin-3-one

In solid state, the thermal rearrangement of bis(O-iodobenzoyl) peroxide which yields 1-(2'-iodobenzoyloxy)-1,2-benziodoxolin-3-one,is investigated by laser Raman spectroscopy. The intramolecular vibration spectra are used to characterize this chemical rearrangement. The phonon spectra obtained as a function of the rearrangement progress show that, in spite of the reported topotactic nature of the reaction, it proceeds by a heterogeneous mechanism. A temperature dependence study of the phonon spectra reveal no mode-softening for any optical phonons. Therefore, no evidence has been found for this reaction to be phonon-assisted.     

Sorption of inorganic nanoparticles in woven cellulose fabrics

Titanium dioxide was deposited from aqueous suspension onto cellulosic surfaces.Titania was sourced from Degussa (P25TM,70:30 anatase:rutile).Dry uptake of particles was shown to be rapid and dominant with one-third of the deposition occurring in less than 30 s and over one-half in the first minute.Isotherms were recorded to compare the rate of titanium deposition on dry and pre-wetted cotton.In the dry case uptake reached a maximum in 30 min whereas in the pre-wetted case the uptake was seen to continue beyond 180 min.A broad trend of higher deposition occurring at lower pH was seen,corresponding to the region where surface charges were opposite and thus attractive.Dry pickup was less significant at high pH.The response to varying ionic strength was complex and was attributed to the combined effect of charge screening,particle aggregation and consequent particle entrapment or occlusion.Titania deposition into the interstices of woven cotton sheets resulted in the formation of inorganic,nanoparticulate skeletons which could be isolated by controlled combustion of the cellulose and thus cotton was suggested to have potential for the templated synthesis of high surface area semiconductor materials.