Fluorescent sensing platform for low-cost detection of Cu2+ by coumarin derivative: DFT calculation and practical application in herbal and black tea samples

A fluorogenic probe based on a coumarin-derivative for Cu²⁺ sensing in CH₃CN/H₂O media (v/v, 95/5, 5.0 μM) was developed and applied in real samples. 3-(4-chlorophenyl)-6,7-dihydroxy-coumarin (MCPC) probe was obtained by synthetic methodologies and identified by spectral techniques. The probe MCPC showed remarkable changes with a “turn-off” fluorogenic sensing approach for the monitoring of Cu²⁺ at 456 nm under an excitation wavelength of 366 nm. The response time of the probe MCPC was founded as only 1 min. The detection limit of the probe MCPC was recorded to be 1.47 nM. The binding constant and possible stoichiometric ratio (1:1) values were determined by Benesi-Hildebrand and Job’s plot systems, respectively. The mechanism of the probe MCPC with Cu²⁺ was further confirmed by ESI-MS and FT-IR analyses, as well as supported by theoretical calculations. Furthermore, the probe MCPC was successfully employed for the practical applications to sense Cu²⁺ in different herbal and black tea samples. The proposed sensing method was also verified by ICP-OES method.     

Asymmetric organocatalytic direct Mannich reaction of acetylacetone and isatin derived ketimines: Low catalyst loading in chiral cinchona-squaramides

A highly enantioselective synthesis of 3-amino-2-oxindoles by direct Mannich reaction between acetylacetone and N-carbamoyl isatin ketimine has been described herein. Corresponding chiral adducts were obtained in high yields (up to 98%) and with excellent enantioselectivities (up to?>99% ee) by very low (1?mol%) catalyst loading of 2-adamantyl substituted bifunctional cinchona-squaramide.     

Evidence for involvement of cationic intermediate in epoxidation of chiral allylic alcohols and unfunctionalised alkenes catalysed by MnIII(quinazolinone) complexes

A pair of Mn^III(quinazolinone) complexes was prepared and evaluated in the catalytic epoxidation of the chiral allylic alcohols and unfunctionalised alkenes with iodosylbenzene. Epoxidation of chiral allylic alcohols with 1,3-allylic strain proceeded chemo- and diastereoselectively to give threo-epoxy alcohol (up to 99% d.r). Epoxidation of unfunctionalised alkenes by the proposed catalyst system proceeded nonselectively, as evidenced by the formation of isomerization and rearrangement products in the epoxidation of (Z)-stilbene. A three-step pathway involving a cationic intermediate is proposed for the formation of isomerization and rearrangement products. The fact that only products resulting from the cationic intermediate were detected in the oxidation of a mechanistic probe, (2-methoxy-3-vinylcyclopropyl)benzene, with Mn^III(quinazolinone) and PhIO substantiated the cationic oxygen transfer mechanism.     

Enzyme catalyzed hydroxymethylation of aromatic aldehydes with formaldehyde. Synthesis of hydroxyacetophenones and (S)-benzoins

Benzaldehyde lyase from the Pseudomonas Fluorescens catalyzed reaction of aromatic aldehydes with formaldehyde providing 2-hydroxy-1-arylethan-1-one in high yields via an acyloin linkage. Kinetic resolution of rac-benzoins with formaldehyde providing (S)-benzoins and 2-hydroxy-1-arylethan-1-one via C-C bond cleavage and a bond formation reaction.     

Boron Removal from Aqueous Solutions by Adsorption on Waste Sepiolite and Activated Waste Sepiolite Using Full Factorial Design

In the present paper, boron removal from aqueous solution by adsorption was investigated and 2³ full factorial design was applied. Non activated waste sepiolite (NAWS) and HCl activated waste sepiolite (AWS) were used as adsorbents. Regression equation formulated for boron adsorption was represented as a function of response variables. The results obtained from the study on parameters showed that as pH increased and temperature decreased boron removal by adsorption increased. Adsorbed boron amount on AWS was higher than that of NAWS. Maximum boron removal was obtained at pH 10 and 20°C for both adsorbents. Adsorption data obtained from batch adsorption experiments carried out with NAWS and AWS fitted to the Langmuir equation. The batch adsorption capacities were found in mg/g: 96.15 and 178.57 for NAWS and AWS, respectively. The capacity value for column study was obtained by graphical integration as 219.01 mg/g for AWS. The Thomas and the Yoon-Nelson models were applied to experimental data to predict the breakthrough curves and to determine the characteristic parameters of the column useful for process design.     

Enhanced photoelectrochemical activity of magnetically modified TiO2 prepared by a simple ex-situ route

Journal of Solid State Electrochemistry - Modified TiO2 nanocomposites have been recognized as attractive photocatalytic materials in solar energy conversion. The aim of this study is to enhance...     

Development of reactive methacrylates based on glycidyl methacrylate

Six methacrylate monomers have been synthesized for use as reactive diluents in dental composites and evaluated to investigate the relationship between molecular structure and monomer reactivity. Four were synthesized by reactions of glycidyl methacrylate (GMA) with various acids, 2‐(2‐methoxyethoxy)acetic acid ( 1 ), 2‐(2‐(2‐methoxyethoxy)ethoxy)acetic acid ( 2 ), cyanoacetic acid ( 3 ), and benzoic acid ( 4 ); others were synthesized by reactions of GMA with diethyl hydrogen phosphate ( 5 ) or methanol ( 6 ). Monomers 1 and 2 are novel, 3 seems to be novel, 4 and 6 were synthesized via a novel method, and the synthesis of 5 was described in the literature. The monomers showed high crosslinking tendencies during thermal bulk polymerizations. The photo‐, homo‐, and copolymerization behavior of the monomers with 2,2‐bis[4‐(2‐hydroxy‐3‐methacryloyloxy)phenyl]propane (Bis‐GMA) were investigated. The maximum rate of polymerizations of monomers 2 – 6 was found to be greater than triethyleneglycol dimethacrylate, Bis‐GMA, 2‐hydroxyethyl methacrylate, and glycerol dimethacrylate. For the more reactive monomers ( 2 , 3 , and 4 ), the oxygen sensitivity of polymerization was found to be low due to a hydrogen abstraction/chain transfer reaction. The computationally calculated dipole moment and lowest unoccupied molecular orbital energies indicated that there seems to be a correlation between these quantities and reactivity for ester linked monomers ( 1 – 5 ), which was also supported by ¹³C NMR data. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3787–3796, 2010     

An Electrochemical DNA Biosensor for the Detection of the Apa I Polymorphism in the Vitamin D Receptor Gene Using Meldola's Blue as a Hybridization Indicator

Electrochemical detection of nucleic acid base mismatches related to Apa I single nucleotide polymorphism (SNP) in the vitamin D receptor gene was performed successfully using 7‐dimethyl‐amino‐1,2‐benzophenoxazinium salt (Meldola's blue, MDB) with 10.9 pmol/100 μL of detection limit. MDB reduction signals obtained from probe, mismatch(probe‐SNP containing target) and hybrid(probe‐target) modified pencil graphite electrode(PGE) increased respectively. The sensor was able to clearly distinguish perfect match from mismatch DNA in a 30 min. detection time. Several factors affecting on the hybridization and indicator response are studied to maximize sensitivity and selectivity. The advantages of the biosensor are discussed in comparison with previous electrochemical assays for DNA hybridization.     

A Validated Thin-Layer Chromatographic Method for Analysis of Bupropion Hydrochloride in a Pharmaceutical Dosage Form

JPC – Journal of Planar Chromatography – Modern TLC - A simple and sensitive thin-layer chromatographic method has been established for analysis of bupropion hydrochloride in...     

Design and preparation of imprinted surface plasmon resonance (SPR) nanosensor for detection of Zn(II) ions

A novel Zn(II) ions imprinted poly (2-hydroxyethyl Methacrylate-N-methacryloyl-(L)-histidine methyl ester) poly(HEMAH) surface plasmon resonance (SPR) nanosensor were designed for detection of Zn(II) ions in aqueous solution and artificial plasma providing a low cost, rapid and reliable results compared to other techniques such as atomic absorption spectroscopy, inductively coupled plasma-mass spectrometer, X-ray fluorescence with synchrotron radiation. Zn(II) ions imprinted nanofilm on the SPR chip surface was synthesized by bulk polymerization. Characterization of Zn(II) ions imprinted nanosensor was performed by contact angle measurement, atomic force microscopy (AFM), ellipsometry and Fourier transform infrared spectroscopy-attenuated total reflection (FTIR-ATR). Designed nanosensor was applied for selective detection of Zn(II) ions in aqueous solution within the range of 0.5–1.0?µg/mL. The limit of detection (LOD) and limit of quantification (LOQ) were calculated as 0.19 and 0.64?ng/mL, respectively. Association kinetics analysis, Scatchard, Langmuir, Freundlich, Langmuir–Freundlich, Tempkin and Dubinin-Radushkevich isotherms were analyzed to the experimental data in order to identify the adsorption behavior. The selectivity of the SPR nanosensor was examined by using competitive metal ions such as Cd(II), Cu(II), Pb(II), and Fe(II). To evaluate the imprinting effect of Zn(II) ions imprinted (MIP) and non-imprinted (NIP) nanosensor was also prepared as the control. Repeatability of the response signal was tested by four times adsorption–desorption–regeneration cycle.