A Validated Thin-Layer Chromatographic Method for Analysis of Bupropion Hydrochloride in a Pharmaceutical Dosage Form

JPC – Journal of Planar Chromatography – Modern TLC - A simple and sensitive thin-layer chromatographic method has been established for analysis of bupropion hydrochloride in...     

Design and preparation of imprinted surface plasmon resonance (SPR) nanosensor for detection of Zn(II) ions

A novel Zn(II) ions imprinted poly (2-hydroxyethyl Methacrylate-N-methacryloyl-(L)-histidine methyl ester) poly(HEMAH) surface plasmon resonance (SPR) nanosensor were designed for detection of Zn(II) ions in aqueous solution and artificial plasma providing a low cost, rapid and reliable results compared to other techniques such as atomic absorption spectroscopy, inductively coupled plasma-mass spectrometer, X-ray fluorescence with synchrotron radiation. Zn(II) ions imprinted nanofilm on the SPR chip surface was synthesized by bulk polymerization. Characterization of Zn(II) ions imprinted nanosensor was performed by contact angle measurement, atomic force microscopy (AFM), ellipsometry and Fourier transform infrared spectroscopy-attenuated total reflection (FTIR-ATR). Designed nanosensor was applied for selective detection of Zn(II) ions in aqueous solution within the range of 0.5–1.0?µg/mL. The limit of detection (LOD) and limit of quantification (LOQ) were calculated as 0.19 and 0.64?ng/mL, respectively. Association kinetics analysis, Scatchard, Langmuir, Freundlich, Langmuir–Freundlich, Tempkin and Dubinin-Radushkevich isotherms were analyzed to the experimental data in order to identify the adsorption behavior. The selectivity of the SPR nanosensor was examined by using competitive metal ions such as Cd(II), Cu(II), Pb(II), and Fe(II). To evaluate the imprinting effect of Zn(II) ions imprinted (MIP) and non-imprinted (NIP) nanosensor was also prepared as the control. Repeatability of the response signal was tested by four times adsorption–desorption–regeneration cycle.     

Cyclopolymerization of amine-linked diacrylate monomers

New diacrylate monomers for cyclopolymerization were synthesized from the reaction of ethyl α-chloromethylacrylate (ECMA) and t-butyl α-bromomethyl acrylate (TBBr) with aniline, adamantyl amine, t-butyl amine, cyanamide, and 4-tetradecyl aniline in yields of ca. 50–70%. Bulk and solution polymerizations with azobisisobutyronitrile (AIBN) at 60–85°C gave soluble cyclopolymers with M_n and M_w ranging from 10,000–30,000 and 12,000–40,000, respectively. The ECMA–cyanamide derivative only gave crosslinked polymers. ¹H and ¹³C solution NMR indicated high cyclization efficiency (>93%). A prototype NLO polymer was synthesized from the reaction of the TBBr–aniline cyclopolymer with tetracyanoethylene. The p-hydroxyaniline derivative of ECMA was synthesized and used for further derivatizations; for example, the benzoate ester was made and polymerized (M_n = 21,260 and M_w = 40,317). The ester groups of the TBBrndash;aniline polymer were hydrolyzed completely to give a polymer with both acid and base moieties. DSC thermograms showed glass transitions of 132°C for the ECMA–aniline derivative, 192°C for the ECMA–adamantyl derivative, 53°C for the TBBr–tetradecylaniline derivative, and 120° for the ECMA–p-benzoylaniline derivative. The ECMA–t-butyl amine polymer showed no obvious T_g. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2111–2121, 1997     

Enantioseparation of aromatic amino acids using CEC monolith with novel chiral selector,N‐methacryloyl‐l‐histidine methyl ester

A new type of polymethacrylate‐based monolithic column with chiral stationary phase was prepared for the enantioseparation of aromatic amino acids, namely d ,l ‐phenylalanine, d ,l ‐tyrosine, and d ,l ‐tryptophan by CEC. The monolithic column was prepared by in situ polymerization of butyl methacrylate (BMA), N‐methacryloyl‐l ‐histidine methyl ester (MAH), and ethylene dimethacrylate (EDMA) in the presence of porogens. The porogen mixture included DMF and phosphate buffer. MAH was used as a chiral selector. FTIR spectrum of the polymethacrylate‐based monolith showed that MAH was incorporated into the polymeric structure via in situ polymerization. Some experimental parameters including pH, concentration of the mobile phase, and MAH concentration with regard to the chiral CEC separation were investigated. Single enantiomers and enantiomer mixtures of the amino acids were separately injected into the monolithic column. It was observed that l ‐enantiomers of aromatic amino acids migrated before d ‐enantiomers. The reversal enantiomer migration order for tryptophan was observed upon changing of pH. Using the chiral monolithic column (100 μm id and 375 μm od), the best chiral separation was performed in 35:65% ACN/phosphate buffer (pH 8.0, 10 mM) with an applied voltage of 12 kV in CEC. SEM images showed that the chiral monolithic column has a continuous polymeric skeleton and large through‐pore structure.     

Pd(II) complexes of Schiff bases and their application as catalysts in Mizoroki–Heck and Suzuki–Miyaura cross‐coupling reactions

Schiff bases of 2‐(phenylthio)aniline, (C₆H₅)SC₆H₄N?CR (R = (o‐CH₃)(C₆H₅), (o‐OCH₃)(C₆H₅) or (o‐CF₃)(C₆H₅)), and their palladium complexes (PdLCl₂) were synthesized. The compounds were characterized using ¹H NMR and ¹³C NMR spectroscopy and micro analysis. Also, electrochemical properties of the ligands and Pd(II) complexes were investigated in dimethylformamide–LiClO₄ solution with cyclic and square wave voltammetry techniques. The Pd(II) complexes showed both reversible and quasi‐reversible processes in the ?1.5 to 0.3 V potential range. The synthesized Pd(II) complexes were evaluated as catalysts in Mizoroki–Heck and Suzuki–Miyaura cross‐coupling reactions. Copyright © 2015 John Wiley & Sons, Ltd.     

Separation,optimization, and quantification of cytokinins by a recently developed amide-embedded stationary phase

In this study, some plant growth regulators known as cytokinins [kinetin (K), zeatin (Z), thidiazuron (TDZ), benzylaminopurine (BAP), and dimethylallylaminopurine (AAP)] were separated by HPLC using an amide-embedded mixed-mode stationary phase which was synthesized by Aral et al. in recent years. The effect of mobile phase content, mobile phase pH, buffer concentration, and temperature on separation process was studied. In addition, a quantitative determination of cytokinins from Salvia limbata extract was studied, and some validation parameters such as limit of detection (LOD), limit of quantification (LOQ), and relative standard deviation (RSD) were calculated as a range of 0.03–0.1, 0.1–0.26?mg/L, and 0.03–0.08, respectively.     

Synthesis,photopolymerization, and adhesive properties of hydrolytically stable phosphonic acid‐containing (meth)acrylamides

Three novel dental monomers containing phosphonic acid groups ( 1a and 2a , based on diethyl amino(phenyl)methylphosphonate and 3a based on diethyl 1‐aminoheptylphosphonate) were synthesized in two steps: the reaction of α‐aminophosphonates with acryloyl chloride (for monomers 1a and 3a ) or methacryloyl chloride (for 2a ) to give monomers with phosphonate groups, and the hydrolysis of phosphonate groups by using trimethyl silylbromide. Their (and the intermediates') structures were confirmed by FTIR, ¹H, ¹³C, and ³¹P NMR spectroscopy. All the monomers dissolve well in water (1<pH<2) and are hydrolytically stable. Their homo‐ and copolymerizations with 2‐hydroxyethyl methacrylate (HEMA) and HEMA/glycerol dimethacrylate were investigated with photo‐DSC. Thermal polymerization of the new monomers in water or in ethanol/water solution was investigated, giving polymers in good yields. X‐ray diffraction results showed only dicalcium phosphate dehydrate formation upon interaction of 1a ‐ 3a with hydroxyapatite indicating its strong decalcification and that monomer‐Ca salts are highly soluble. Some results were also compared to those with a bisphosphonic acid‐containing methacrylamide ( 4a ) previously reported; and the influence of monomer structure on polymerization/adhesive properties is discussed. These properties, especially hydrolytic stability and good rates of polymerization, make these new monomers suitable candidates as components of dental adhesive mixtures. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 511–522     

Quantitative characterization of chemical degradation of heat‐treated wood surfaces during artificial weathering using XPS

The X‐ray photoelectron spectroscopy (XPS) study of three heat‐treated North American wood species (jack pine, birch and aspen) was carried out to evaluate chemical modifications occurring on the wood surface during artificial weathering for different times. The results suggest that the weathering reduces lignin content (aromatic rings) at the surface of heat‐treated wood, consequently, the carbohydrates content increases. This results in surfaces richer in cellulose and poorer in lignin. Heat‐treated wood surfaces become acidic due to weathering, and the acidity increases as the weathering time increases. Three possible reasons are given to account for the increase of acidity during weathering. The lignin content increases, whereas the hemicelluloses content decrease due to heat treatment. Heat‐treated woods have lower acidity to basicity ratios than the corresponding untreated woods for all three species because of the decrease in carboxylic acid functions mainly present in hemicelluloses. The wood composition changes induced by weathering are more significant compared to those induced by heat treatment at wood surface. Exposure to higher temperatures causes more degradation of hemicelluloses, and this characteristic is maintained during weathering. However, the wood direction has more effect on chemical composition modification during weathering compared to that of heat treatment temperature. The heat‐treated jack pine is affected most by weathering followed by heat‐treated aspen and birch. This is related to differences in content and structure of lignin of softwood and hardwood. The use of XPS technique has proved to be a reliable method for wood surface studies. Copyright © 2012 John Wiley & Sons, Ltd.     

Dynamic Nuclear Polarization in Suspensions Consisting of Xylene Isomers and Asphaltene Extracted from MC‐800 Liquid Asphalt

Overhauser effect type dynamic nuclear polarization experiments were performed to study suspensions of asphaltene in the xylene isomers (o‐, m‐, p‐) at a low magnetic field of 1.44 mT and three different temperatures (15, 25, and 35°C). The asphaltene was extracted from MC‐800 liquid asphalt. Intermolecular spin‐spin interactions occur between nuclear spins of hydrogen in the solvent medium and the free electron spins in the asphaltene micelles. The electron paramagnetic resonance spectrum of the asphaltene was obtained and the saturation experiments were applied to the samples prepared in vacuum. For all media, the dipole‐dipole interaction is predominant due to the negative signal enhancements. In all temperatures, the ultimate enhancement is the smallest for the p‐xylene solvent medium which has the lowest electrical dipole moment. The normalized low frequency relaxation components were calculated for 25°C, and the behavior of the nuclear‐electron coupling parameter according to this component is in agreement with the other works in the literature.     

Polymerization of Bis(Pyridine)bis-(2,4,6-tribromophenoxo)copper(II) Complex (Py2Cu(TBrP)2) by Electrooxidation and Structural Characterization by 1H-NMR, 13C-NMR,and FTIR Spectroscopies

Abstract

Electroinitiated polymerization of bis(2,4,6-tribromophenoxo)- bis(pyridine)copper(II) complex was achieved in dimethylformamide-tetrabutylammonium tetrafluoroborate solvent-electrolyte couple under air or nitrogen at room temperature by constant potential electrolysis. Polymerization conditions were based on the peak potentials measured by cyclic voltammetry. The structural analyses of the polymers were done by ¹H-NMR, ¹³C-NMR, and FTIR spectral analyses along with molecular weight measurements by cryoscopy. The poly(dibromo phenylene oxide)s obtained only at oxidation potentials in either atmosphere were found to be highly linear, indicating mainly 1,4-catenation was taking place.