Syntheses, characterization, antimicrobial and genotoxic activities of new Schiff bases and their complexes

Two new Schiff base ligands (L¹, L²) have been prepared from the reaction of 2,6-diacetylpyridine and 2-pyridinecarboxyaldehyde with 4-amino-2,3-dimethyl-1-phenyl-3-pyrozolin-5-on, and their Co(II), Cu(II), Ni(II), Mn(II), and Cr(III) metal complexes have also been prepared. The complexes are formed by coordination of N and O atoms of the ligands. Their structures were characterized by physico-chemical and spectroscopic methods. The analytical data shows that the metal to ligand ratio in the Schiff base complexes is 1:2. The Schiff base ligands and all complexes were evaluated for their in vitro antibacterial and antifungal activities by the disc diffusion method. In addition, the genotoxic properties of the ligands were studied.     

Synthesis and characterization of new 4,5-dihydropyrazol-1-yl derivatives

In this study, first, a series of chalcone compounds S1–S6 were synthesized from various acetophenone derivatives (acetophenone, p-methyl acetophenone, and p-methoxy acetophenone) and aromatic aldehyde derivatives (benzaldehyde, p-methyl benzaldehyde, and p-methoxy benzaldehyde) by the Claisen–Schmidt condensation reaction. These S1–S6 compounds were then used in the preparation of 4,5-dihydropyrazol-1-yl derivatives S7–S15. Finally, four new compounds S16–S19 were synthesized from compound (S7, S8, S9, and S12) and 2,4-dinitrophenylhydrazine. Therefore, three known and ten new heterocyclic compounds were synthesized and completely characterized using ¹H NMR, ¹³C NMR, IR, and elemental analysis.     

Multicomponent Reactions of Furan‐2,3‐diones: Synthesis and Characterizations of Furo[3,2‐c]pyran‐4‐ones

Furo[3,2‐c]pyran‐4‐ones, which possess a natural‐product skeleton, are synthesized via a simple, one‐pot, three‐component reaction of furan‐2,3‐diones with dialkyl acetylenedicarboxylates and Ph₃P.     

Phenolic compounds from the aerial parts of Clematis viticella L. and their in vitro anti-inflammatory activities*

Phytochemical investigations on the EtOH extract of Clematis viticella led to the isolation of six flavonoid glycosides, isoorientin (1), isoorientin 3′-O-methyl ether (2), quercetin 7-O-α-L-rhamnopyranoside (3), quercetin 3,7-di-O-α-L-rhamnopyranoside (4), manghaslin (5) and chrysoeriol 7-O-β-D-glucopyranoside (6), one phenylethanol derivative, hydroxytyrosol (7), along with three phenolic acids, caffeic acid (8), (E)-p-coumaric acid (9) and p-hydroxybenzoic acid (10). The structures of the isolates were elucidated on the basis of NMR and HR-MS data. All compounds were isolated from C. viticella for the first time. Compounds 7 and 8 showed significant anti-inflammatory activity at 100 μM by reducing the release of NO in LPS-stimulated macrophages comparable to positive control indomethacin. Compounds 3 and 7 exhibited anti-inflammatory activity through lowering the levels of TNF-α while 1, 3 and 5 decreased the levels of neopterin better than the positive controls.     

Characterization and kinetics analysis of the thermal decomposition of the humic substance from hazelnut husk

A humic substance was obtained from hazelnut husk using an alkali extraction. The chemical and morphological structure of the humic matter was characterized via elemental analysis, Fourier transform infrared spectrometry (FTIR), nuclear magnetic resonance, Brunauer-Emmet-Teller (BET) analysis, scanning electron microscopy (SEM), and thermogravimetric-FTIR (TG-FTIR). In addition, thermal analysis measurements TG analysis-differential thermogravimetry/differential scanning calorimetry (TGA-DTG/DSC) were performed under dynamic air conditions to better determine the origin, physical and chemical structure, and decomposition process of the humic matter. The Kissinger-Akahira-Sunose (KAS) and Flynn-Wall-Ozawa (FWO) methods were used to calculate the kinetic parameters of the high-temperature decomposition process. It was observed that the activation energy values were almost constant at certain conversion and temperature intervals. In addition, the structure of the humic substance at different temperatures was also investigated via FTIR analysis. It was found that the obtained humic substance had a very stable structure and decomposed at a high temperature. The stability of the humic matter can be a useful tool in the environmental quality research of soil.     

Synthesis, characterization and some properties of epoxy resins containing azomethine bonding

New epoxy resins were prepared from hydroxyl substituted Schiff base monomers in two steps. The first step is based on the synthesis of hydroxyl substituted Schiff base monomers via condensation reaction. The second step includes the reaction between Schiff base monomers with epichlorohydrine (EPC) to obtain epoxy resins. The structures of resulting compounds were confirmed by FTIR and ¹H-NMR. TG-DTA and DSC measurements were made for thermal characterizations of the compounds. Chemical resistances of the cured epoxy-amine systems in acidic, alkaline and organic solvents were determined for coating applications. HCl (aqueous solution, 10%), NaOH (aqueous solution, 10%), DMSO, DMF, N-methylpyrrolidone, ethanol, THF and acetone were used for corrosion tests. Chemical resistance data show that the synthesized resins have good chemical resistance against various acid, alkaline and common organic solvents.     

Cobalt(II), nickel(II) and copper(II) complexes of a Schiff base ligand: synthesis,structural characterization and luminescence properties

A Schiff base ligand (HL), 2,4-dimethoxy-N-(5-chloro-2-hydroxybenzylidene)-benzenamine, derived from 5-chloro-2-hydroxybenzaldehyde and 2,4-dimethoxyaniline, and its metal complexes [Co(L)₂]·CH₃OH (1), [Ni(L)₂] (2), [Cu(L)₂] (3) have been synthesized. The compounds were characterized by analytical and spectroscopic methods. In addition, the structures of the Schiff base HL and its Co(II) complex were determined by single-crystal X-ray analysis. The Co(II) center is six-coordinate, being coordinated to two imine nitrogen, two phenolate oxygen and two methoxy oxygen atoms of two crystallographically independent Schiff base ligands. Luminescence properties of HL and its complexes were investigated both in solution and in the solid state.     

Investigation of metal activation of a partially purified polyphenol oxidase enzyme electrode

Biosensors can be developed using different biological materials and immobilization technologies. Enzymes are generally used in biosensor construction, and some enzymes need metal ions or small organic molecules as a cofactor for their activation. Polyphenol oxidases can be activated by several metal ions such as Cu²⁺, Mg²⁺, Zn²⁺, Mn²⁺, and Ni²⁺. In this study, a new measurement method has been developed that is based on the metal ion activation of the polyphenol oxidase enzyme used in the biosensor preparation, especially to determine the concentration of Mg²⁺ ions. Polyphenol oxidase (PPO) (EC 1.10.3.1) was partially purified from potato (Solanum tuberosum) by using (NH₄)₂SO₄ precipitation, dialysis, and lyophylization processes. As a result of this processes, approximately 30-fold purification was achieved for PPO. For construction of the biosensor, the enzyme was immobilized on the dissolved oxygen probe membrane using gelatin and glutaraldehyde (2.5%). Using the biosensor, we obtained responses for catechol in the absence and presence of Mg²⁺ ions. Differences between the biosensor responses were related to the concentration of Mg²⁺ ions. The biosensor response depends linearly on concentration of Mg²⁺ ions between 0.05 and 7.5?mM. In the optimization studies, phosphate buffer (pH 7.0, 50?mM) and 35°C were determined to be the optimum conditions. This project will be a novel biosensor study and it might bring a new term, ‘activation based biosensor’ into the biosensor area.     

An experimental and theoretical approach to the molecular structure of 3‐{[4‐(3‐Methyl‐3‐phenyl‐cyclobutyl)‐thiazol‐2‐yl]‐hydrazono}‐1,3‐dihydro‐ indol‐2‐one

The title molecule, 3‐{[4‐(3‐methyl‐3‐phenyl‐cyclobutyl)‐thiazol‐2‐yl]‐hydrazono}‐1,3‐dihydro‐indol‐2‐one (C₂₂H₂₀N₄O₁S₁), was prepared and characterized by ¹H NMR, ¹³C NMR, IR, UV–visible, and single‐crystal X‐ray diffraction. The compound crystallizes in the monoclinic space group P21 with a = 8.3401(5), b = 5.6976(3), c = 20.8155(14) Å, and β = 95.144(5)°. Molecular geometry from X‐ray experiment and vibrational frequencies of the title compound in the ground state has been calculated using the Hartree–Fock with 6‐31G(d, p) and density functional method (B3LYP) with 6‐31G(d, p) and 6‐311G(d, p) basis sets, and compared with the experimental data. The calculated results show that optimized geometries can well reproduce the crystal structural parameters, and the theoretical vibrational frequencies values show good agreement with experimental data. Density functional theory calculations of the title compound and thermodynamic properties were performed at B3LYP/6‐31G(d, p) level of theory. © 2011 Wiley Periodicals, Inc. Int J Quantum Chem, 2012     

N,S-Substituted Dienes from Mono(arylthio)substituted- and S-, S,S-Substituted Dienes

Mono(thio)substituted dienes 1a-1b gave compounds 3a-c and 5d-g with piperazine and piperidine derivatives in dichloromethane. Compounds 8 , 9 , and 10 were obtained from the reactions of perchlorobutadiene ( 6 ) with 1,4-butanedithiol ( 7 ) in ethanol in the presence of sodium hydroxide. Compounds 12a-b , 13a-b were obtained from the reactions of perchlorobutadiene ( 6 ) with allylmercaptan (CH 2 =CH--CH 2 --SH) and mercaptoethanol (HO--CH 2 --CH 2 --SH).