为IBA C70回旋加速器设计研制的采用Cusp场型H-离子源与产生He束的ECR离子源的双束轴向注入系统

At the moment,a 70MeV cyclotron is under construction by the IBA company.This cyclotron will be able to accelerate H~- beam from a multicusp source and with a beam intensity in the range of 10mA at the source extraction.A He~(1 2 ) beam is also required.This beam will be produced by a PANTECHNIK ECR ion source(SUPERNANOGAN)with an extracted current of 1 to 2mA.In this paper the studies and design of the two sources with a common axial injection in the cyclotron are described.     

Mössbauer investigation of non-aggregated γ-Fe2O3 particles

Investigation by Mössbauer spectroscopy of non-aggregated nanometric -Fe₂O₃ particles dispersed in polymer is reported. Magnetic interactions between the particles were controlled by varying the particle concentration in the polymer. The results show that over the investigated range, the interactions make the relaxation time shorter. Infield experiments show spin canting which increases with decreasing particle size.     

Dynamics and non-equilibrium steady state in a system of coupled harmonic oscillators

A system of two coupled oscillators, each of them coupled to an independent reservoir, is analysed. The analytical solution of the non-rotating wave master equation is obtained in the high-temperature and weak coupling limits. No thermal entanglement is found in the high-temperature limit. In the weak coupling limit the system converges to an entangled non-equilibrium steady state. A critical temperature for the appearance of quantum correlations is found.     

Coherent combining of two Nd:YAG lasers in a Vernier–Michelson-type cavity

The coherent combining of two Nd:YAG lasers using a Vernier–Michelson-type cavity has been demonstrated. The spectral behaviour and the energetic performance are reported. We firstly show that the combining efficiency is not strongly spoilt by the gain imbalance between the two amplifying media, and secondly, that despite the interferometric nature of the cavity, the Vernier–Michelson laser can withstand environmental perturbations without alteration in output power. Received: 25 April 2002 / Revised version: 18 May 2002 / Published online: 25 September 2002 RID="*" ID="*"Corresponding author. Fax: +33-5/5545-7253, E-mail: kermene@ircom.unilim.fr     

MR detection of mechanical vibrations using a radiofrequency field gradient

A new method for NMR characterization of mechanical waves, based upon radiofrequency field gradient for motion encoding, is proposed. A binomial B1 gradient excitation scheme was used to visualize the mobile spins undergoing a periodic transverse mechanical excitation. A simple model was designed to simulate the NMR signal as a function of the wave frequency excitation and the periodicity of the NMR pulse sequence. The preliminary results were obtained on a gel phantom at low vibration frequencies (0-200 Hz) by using a ladder-shaped coil generating a nearly constant RF field gradient along a specific known direction. For very small displacements and/or B1 gradients, the NMR signal measured on a gel phantom was proportional to the vibration amplitude and the pulse sequence was shown to be selective with respect to the vibration frequency. A good estimation of the direction of vibrations was obtained by varying the angle between the motion direction and the B1 gradient. The method and its use in parallel to more conventional MR elastography techniques are discussed. The presented approach might be of interest for noninvasive investigation of elastic properties of soft tissues and other materials.     

Localized proton spectroscopy without water suppression: removal of gradient induced frequency modulations by modulus signal selection

Most Magnetic Resonance Spectroscopy (MRS) localization methods can generate gradient vibrations at acoustic frequencies and/or magnetic field oscillation, which can cause a time-varying magnetic field superimposed onto the static one. This effect can produce frequency modulations of the spectral resonances. When localized MRS data are acquired without water suppression, the associated frequency modulations are manifested as a manifold of spurious peaks, called sidebands, which occur symmetrically around the water resonance. These sidebands can be larger than the small metabolite resonances and can present a problem for the quantitation of the spectra, especially at short echo times. Furthermore, the resonance lineshapes may be distorted if any low frequency modulations are present. A simple solution is presented which consists of selecting the modulus of the acquired Free Induction Decay (FID) signal. Since the frequency modulations affect only the phase of the FID signal, the obtained real spectrum of the modulus is free from the spurious peaks where quantitative results may be directly obtained. Using this method, the distortions caused by the sidebands are removed. This is demonstrated by processing proton MRS spectra acquired without water suppression collected from a phantom containing metabolites at concentrations comparable to those in human brain and from a human subject using two different localization methods (PRESS and Chemical Shift Imaging PRESS-(CSI)). The results obtained illustrate the ability of this approach to remove the spurious peaks. The corrected spectra can then be fit accurately. This is confirmed by the results obtained from both the relative and the absolute metabolites concentrations in phantoms and in vivo.     

Three-dimensional microfabrication by two-photon-initiated polymerization with a low-cost microlaser

Fabrication of submicrometer structures by two-photon-initiated polymerization is performed with an inexpensive and low-power microlaser. This is made possible by the design of photoinitiators with strong two-photon absorption cross sections. We analyze the influence of both material properties and irradiation conditions on the two-photon polymerization rate and show that resins based on our highly sensitive two-photon photoinitiator can be solidified with microlaser excitation, whereas commercial UV photoresins require ultrashort and intense laser pulses.