Microwave-induced combustion synthesis and characterization of NixCo1−xFe2O4 nanocrystals (x = 0.0, 0.4, 0.6, 0.8, 1.0)

A series of Ni-doped cobalt ferrites Ni_xCo1_−xFe₂O₄ (x = 0.0, 0.4, 0.6, 0.8, and 1.0) were prepared using microwave-induced combustion. Nickel, cobalt, and ferric nitrates were used as starting materials and glycine as fuel. The influence of Ni content on the lattice parameter, stretching vibrations, and magnetization was studied. XRD, FTIR, and SEM were used for structure, composition, and morphology investigation. A porous network structure was observed with average particle size 60–67 nm. All samples had a cubic spinel structure. The unit cell parameter “a” decreases linearly with nickel concentration due to the smaller ionic radius of nickel. Magnetization measurements showed that coercivity decreased as Ni content increased; it increased with decreasing temperature.      

An existence result for a nonhomogeneous problem in R2 related to nonlinear Hencky-type materials

This paper investigates a nonlinear and non-homogeneous system of partial differential equations. The motivation comes from the fact that in a particular case the problem discussed here can be used in modeling the behavior of nonlinear Hencky-type materials. The main result of the paper establishes the existence of a nontrivial solution in an adequate functional space of Orlicz–Sobolev type by using Schauder’s fixed point theorem combined with adequate variational techniques.     

Investigation of directional solidified Al–Ti alloy

Al–1 wt% Ti alloy was directionally solidified upwards under argon atmosphere under the two conditions; with different temperature gradients (G = 2.20–5.82 K/mm) at a constant growth rate (V = 8.30 μm/s) and with different growth rates (V = 8.30–498.60 μm/s) at a constant temperature gradient (G = 5.82 K/mm) in a Bridgman furnace. The dependence of characteristic microstructure parameters such as primary dendrite arm spacing (λ₁), secondary dendrite arm spacing (λ₂), dendrite tip radius (R) and mushy zone depth (d) on the velocity of crystal growth and the temperature gradient were determined by using a linear regression analysis. A detailed analysis of microstructure development with models of dendritic solidification and with previous similar experimental works on dendritic growth for binary alloys were also made.     

Synthesis of Some Polymer‐Metal Complexes and Elucidation of their Structures

In this study, the nine coordination polymers of Fe(III), Co(II) and Ni(II) salts have been synthesized using polyacrylamide (PAA), polt(ethylene glycol) (PEG) and poly(vinyl alcohol) (PVA) and their structures were characterized by magnetic and conductivity measurements, ultraviolet‐visible (UV‐VIS), FTIR spectroscopy and thermogravimetric analysis (TGA). The structures of Fe(III) complexes in the all coordination polymers were found as tetrahedral. The structures of PAA‐Co(II) coordination polymer was determined as octahedral geometry whereas PEG‐Co(II) and PVA‐Co(II) complexes showed as tetrahedral structure. PAA‐Ni(II) and PEG‐Ni(II) complexes have octahedral geometry, whereas PVA‐Ni(II) has a square planar structure. Besides, the stress‐strain experiments of PVA‐metal coordination polymers obtained rubber‐like structure were carried out and the value of breaking‐strain of PVA‐Ni(II) complex was found to be about 17% of vulcanized natural rubber. The conductivities of the resulting polymer‐metal complexes were measured by four‐probe technique and were found in the range 10^?5?10^?6 Scm^?1. Thus, it was suggested that they can be used in the field potential application of conducting polymers. TGA results revealed that among the complexes PEG‐Fe(III) and PVA‐Fe(III) complexes have the highest thermally stable.     

An Infrared Spectroscopic Study on the Hofmann-diam-type 1,12-Diaminododecanemetal(II) Tetracyanonickelate(II)-aromatic Guest Clathrates: M(H2N(CH2)12NH2)Ni(CN)4ċG(M=Co, Ni or Cd; G = Benzene, Naphthalene, Anthracene, Phenanthrene or Biphenyl)

Three Hofmann-diaminododecane-type clathrates of the form M(1,12-diaminododecane) Ni(CN)₄G (M = Co, Ni or Cd; G = benzene, naphthalene, anthracene, phenanthrene or biphenyl) have been prepared in powder form. The 1,12-diaminododecane molecules in the host lattice permit the inclusion of bulky guest molecules. The spectral features suggest that these compounds are similar in structure to the other Hofmann-diam-type clathrates.     

A survey of 222Rn concentrations in dwellings of Turkey

As part of a national program to determine public exposure to natural radiation, indoor air ²²²Rn concentrations were determined in dwellings of Turkey. The ²²²Rn concentrations were measured with time-integrating passive nuclear etched track detectors in 27 provincial centers. The indoor radon concentrations were found to be in the range of 10-380 Bq^.m^-3. This revised version was published online in August 2006 with corrections to the Cover Date.     

Spectrothermal studies of 1,10-phenanthroline complexes of Co(II), NI(II), Cu(II) and Cd(II) orotates

The 1,10-phenanthroline (phen) complexes of Co(II), Ni(II), Cu(II) and Cd(II) orotates were synthesized and characterized by elemental analysis, magnetic susceptibility, spectral methods (UV-vis and FTIR) and thermal analysis techniques (TG, DTG and DTA). The Co(II), Ni(II), Cu(II) and Cd(II) ions in diaquabis(1,10-phenanthroline)metal(II) diorotate octahedral complexes [M(H₂O)₂(phen)₂](H₂Or)₂·nH₂O (M=Co(II), n=2.25; Ni(II), n=3; Cu(II) and Cd(II), n=2) are coordinated by two aqua ligands and two moles of phen molecules as chelating ligands through their two nitrogen atoms. The monoanionic orotate behaves as a counter ion in the complexes. On the basis of the first DTG_max, the thermal stability of the hydrated complexes follows the order: Cd(II), 68°C 68°C     

Quantitative determination of gas mixture composition by gas chromatography—New approach

Summary A new method has been developed for the quantitative determination of gas mixture composition where air penetration during gas sample collection would lead to erroneous results. It requires the use of a stationary phase that separates gas sample components and the air and involves 4–5 analyses of samples of equal volumes containing different amounts of air. By graphical extrapolation of the air peak area (S _air ) as a function of the peak areas of the individual components (S _comp ) the areas for these components in the absence of air can be obtained forS _air =0. Using calibration curves for the pure gas components the true quantitative composition of the gas mixture is estimated.     

Comparative study of the phenolic profile,antioxidant and antimicrobial activities of leaf extracts of five Juniperus L. (Cupressaceae) taxa growing in Turkey

Abstract

The purpose of this study was to conduct a comparative evaluation of some biological properties of methanol and water extracts of leaves of five Juniperus taxa growing in Turkey: J. communis L. var. communis (Jcc), J. communis L. var. saxatilis Pall. (Jcs), J. drupacea Labill. (Jd), J. oxycedrus L. subsp. oxycedrus (Joo), J. oxycedrus L. subsp. macrocarpa (Sibth. & Sm.) Ball. (Jom). The antioxidant properties were examined in vitro; both in the DPPH and in the reducing power tests, Joo methanol extract resulted the most active (IC₅₀?=?0.09?±?0.01mg/mL and ASE/mL?=?2.56?±?0.06). In the TBA assay, Jcs methanol extract exhibited the highest activity (IC₅₀?=?4.39?±?0.47?μg/mL). The extracts displayed bacteriostatic activity against Staphylococcus aureus, and Jd methanol extract resulted the most effective (MIC?=?19.53?μg/mL); no effect on the S. aureus biofilm formation was observed. The extracts resulted non-toxic in the Artemia salina lethality bioassay. Finally, the phenolic profile of the methanol extracts was characterized by HPLC-PDA/ESI-MS.     

Novel dye-attached macroporous films for cadmium, zinc and lead sorption: Alkali Blue 6B-attached macroporous poly(2-hydroxyethyl methacrylate)

Alkali Blue 6B-attached poly(2-hydroxyethyl methacrylate) (poly(HEMA)) microporous films were investigated as chelate forming sorbents for heavy metal removal. Poly(HEMA) microporous films were prepared by UV-initiated photo-polymerization of HEMA in the presence of an initiator (azobisisobutyronitrile (AIBN)). Alkali Blue 6B was attached covalently. These films with a swelling ratio of 58%, and carrying 14.8 mmol Alkali Blue 6B m(-2) which were then used in the removal of Cd(II), Zn(II) and Pb(II) from aqueous media. Adsorption rates were very high, equilibrium was achieved in about 30 min. The maximum adsorption of heavy metal ions onto the Alkali Blue 6B-attached films were 41.4 mmol m(-2) for Cd(II), 52.4 mmol m(-2) for Zn(II), and 64.5 mmol m(-2) for Pb(II). When the heavy metal ions competed during the adsorption from a mixture the adsorption values for Cd(II), Zn(II) and Pb(II) were quite close. Heavy metal ions were desorbed by using 0.1 M HNO(3). A significant amount of the adsorbed heavy metal ions (up to 95%) could be desorbed in 30 min. Repeated adsorption/desorption cycles showed the feasibility of these novel dye-attached microporous films for heavy metal removal.