Direct measurement of forces between a colloidal particle and a phospholipid bilayer

Colloidal interaction forces between a silica particle and a solid-supported Langmuir-Schaefer phospholipid bilayer were directly measured using a gradient optical trap and evanescent wave light scattering. A small custom-built Langmuir trough was integrated with an optical trapping microscope to allow force measurements on a single particle within the subphase of the trough after the dip of the substrate was completed. The novel method allows the force measurements to be conducted without transferring the substratum across an air/water interface. The fluctuating particle position near the bilayer was tracked by evanescent wave light scattering to determine the deflection due to surface forces, and the relaxation time of particle fluctuations was measured to simultaneously determine the viscous forces. Measured equilibrium and viscous force-distance profiles of silica microspheres with diameters of 1 and 5 microm on bilayers of dipalmitoyl phosphatidyl choline (DPPC) were markedly different than force-distance on bare mica and DPPC monolayers under the same electrolyte conditions.     

A sequential injection electronic tongue employing the transient response from potentiometric sensors for anion multidetermination

Intelligent and automatic systems based on arrays of non-specific-response chemical sensors were recently developed in our laboratory. For multidetermination applications, the normal choice is an array of potentiometric sensors to generate the signal, and an artificial neural network (ANN) correctly trained to obtain the calibration model. As a great amount of information is required for the proper modelling, we proposed its automated generation by using the sequential injection analysis (SIA) technique. First signals used were steady-state: the equilibrium signal after a step-change in concentration. We have now adapted our procedures to record the transient response corresponding to a sample step. The novelty in this approach is therefore the use of the dynamic components of the signal in order to better discriminate or differentiate a sample. In the developed electronic tongue systems, detection is carried out by using a sensor array formed by five potentiometric sensors based on PVC membranes. For the developed application we employed two different chloride-selective sensors, two nitrate-selective sensors and one generic response sensor. As the amount of raw data (fivefold recordings corresponding to the five sensors) is excessive for an ANN, some feature extraction step prior to the modelling was needed. In order to attain substantial data reduction and noise filtering, the data obtained were fitted with orthonormal Legendre polynomials. In this case, a third-degree Legendre polynomial was shown to be sufficient to fit the data. The coefficients of these polynomials were the input information fed into the ANN used to model the concentrations of the determined species (Cl⁻, and ). Best results were obtained by using a backpropagation neural network trained with the Bayesian regularisation algorithm; the net had a single hidden layer containing three neurons with the tansig transfer function. The results obtained from the time-dependent response were compared with those obtained from steady-state conditions, showing the former superior performance. Finally, the method was applied for determining anions in synthetic samples and real water samples, where a satisfactory comparison was also achieved.      

A thermal study approach to roman age wall painting mortars

Roman ancient mortars have been widely studied, in connection with both diagnosis and application required for restoring. Thermoanalytical experiments performed on mortars from Pompeii and Herculaneum provided a very good understanding of the technology employed. The mortars from Pompeii were obtained by the proper mixing of lime and marble grains while mortars of Herculaneum by lime and silicates compounds. The position of the endothermic peak of calcite decomposition showed important variations in the different samples studied, which was assigned to the different crystallinity and particle sizes. Experiments under CO₂ flow confirmed the presence of magnesium calcium carbonates.     

AFM study of micelle chaining in surface films of polystyrene-block-poly(ethylene oxide) stars at the air/water interface

A series of three-arm star block copolymers were examined using atomic force microscopy (AFM). These stars consisted of a polystyrene core composed of ca. 111 styrene units/branch with poly(ethylene oxide) (PEO) chains at the star periphery. Each star contained different amounts of PEO, varying from 107 to 415 ethylene oxide units/branch. The stars were spread as thin films at the air/water interface on a Langmuir trough and transferred onto mica at various surface pressures. Circular domains representing 2D micelle-like aggregated molecules were observed at low pressures. Upon further compression, these domains underwent additional aggregation in a systematic manner, including micellar chaining. At this point, domain area and the number of molecules/domain increased with increasing pressure. In addition, it was found that longer PEO chains led to greater intermolecular separation and less aggregation. These AFM results correspond to attributes seen in the surface pressure-area isotherms of the stars. In addition, they demonstrate the viability of AFM as a quantitative characterization technique.     

The Role of Dielectric Barrier Discharge Atmosphere and Physics on Polypropylene Surface Treatment

Dielectric barrier discharge (DBD) is the discharge involved in corona treatment, widely used in industry to increase the wettability or the adhesion of polymer films or fibers. Usually DBD's are filamentary discharges but recently a homogeneous glow DBD has been obtained. The aim of this paper is to compare polypropylene surface transformations realized with filamentary and glow DBD in different atmospheres (He, N₂, N₂ + O₂ mixtures) and to determine the relative influence of both the discharge regime and the gas nature, on the polypropylene surface transformations. From wettability and XPS results it is shown that the discharge regime can have a significant effect on the surface transformations, because it changes both the ratio of electrons to gas metastables, and the space distribution of the plasma active species. This last parameter is important at atmospheric pressure because the mean free paths are short (m). These two points explain why in He, polypropylene wettability increase is greater by a glow DBD than by a filamentary DBD. In N₂, no significant effect of the discharge regime is observed because electrons and metastables lead to the same active species throughout the gas bulk. The specificity of a DBD in N₂ atmosphere compared to an atmosphere containing oxygen is that it allows very extensive surface transformations and a greater increase of the polypropylene surface wettability. Indeed, even in low concentration and independently of the discharge regime, when O₂ is present in the plasma gas, it controls the surface chemistry and degradation occurs.     

Solvent effect on the synthesis of clarithromycin: A molecular dynamics study

Clarithromycin (6-O-methylerythromycin A) is a 14-membered macrolide antibiotic which is active in vitro against clinically important gram-positive and gram-negative bacteria. The selectivity of the methylation of the C-6 OH group is studied on erythromycin A derivatives. To understand the effect of the solvent on the methylation process, detailed molecular dynamics (MD) simulations are performed in pure DMSO, pure THF and DMSO:THF (1:1) mixture by using the anions at the C-6, C-11 and C-12 positions of 2',4"-[O-bis(TMS)]erythromycin A 9-[O-(dimethylthexylsilyl)oxime] under the assumption that the anions are stable on the sub-nanosecond time scale. The conformations of the anions are not affected by the presence of the solvent mixture. The radial distribution functions are computed for the distribution of different solvent molecules around the 'O-' of the anions. At distances shorter than 5 A, DMSO molecules are found to cluster around the C-11 anion, whereas the anion at the C-12 position is surrounded by the THF molecules. The anion at the C-6 position is not blocked by the solvent molecules. The results are consistent with the experimental finding that the methylation yield at the latter position is increased in the presence of a DMSO:THF (1:1) solvent mixture. Thus, the effect of the solvent in enhancing the yield during the synthesis is not by changing the conformational properties of the anions, but rather by creating a suitable environment for methylation at the C-6 position.     

Composition of essential oils from <Emphasis Type="Italic">Salvia anatolica</Emphasis>, a new species endemic from Turkey

The component composition of essential oils produced by steam distillation from flower heads, leaves, and stems of Salvia anatolica (Lamiaceae), a recently described new species endemic from Turkey, was studied by GC/FID and GC/MS. A total of 127 volatile components representing 96% of the oil was identified in essential oil from flower heads and leaves. It was found that the principal oil components of flower heads and leaves were α-pinene (10.9%), β-pinene (6.7%), α-copaene (6.3%), heptacosane (6.2%), and hexadecanoic acid (5.0%). A total of 109 volatile compounds representing 87.9% of the oil was characterized in essential oil isolated from stems. The principal oil components of stems were identified as hexadecanoic acid (27.2%), tetradecanoic acid (15.2%), dodecanoic acid (5.5%), and α-copaene (5.0%). __________ Translated from Khimiya Prirodnykh Soedinenii, No. 6, pp. 552–555, November–December, 2007.     

Speciation of Cr(III) and Cr(VI) in Environmental Samples after Solid Phase Extraction on Amberlite XAD–2000

A method for speciation of Cr(III) and Cr(VI) in real samples has been developed. Cr(VI) has been separated from Cr(III) and preconcentrated as its pyrrolidinedithiocarbamate (APDC) complex by using a column containing Amberlite XAD–2000 resin and determined by FAAS. Total chromium has also been determined by FAAS after conversion of Cr(III) to Cr(VI) by oxidation with KMnO₄. Cr(III) has been calculated by subtracting Cr(VI) from the total. The effect of pH, flow‐rate, adsorption and batch capacity and effect of various metal cations and salt anions on the sorption onto the resin were investigated. The adsorption is quantitative in the pH range of 1.5–2.5, and Cr(VI) ion was desorbed by using H₂SO₄ in acetone. The recovery of Cr(VI) was 97 ± 4 at a 95% confidence level. The highest preconcentration factor was 80 for a 200 mL sample volume. The adsorption and batch capacity of sorbent were 7.4 and 8.0 mg g^?1 Cr(VI), respectively, and loading half time was 5.0 min. The detection limit of Cr(VI) is 0.6 μg/L. The procedure has been applied to the determination and speciation of chromium in stream water, tap water, mineral spring water and spring water. Also, the proposed method was applied to total chromium preconcentration in microwave digested moss and rock samples with satisfactory results. The developed method was validated with CRM‐TMDW‐500 (Certified Reference Material Trace Metals in Drinking Water) and BCR‐CRM 144R s (Certified Reference Material Sewage Sludge, Domestic Origin) and the results obtained were in good agreement with the certified values. The relative standard deviations were below 6%.     

The delocalization index as an electronic aromaticity criterion: application to a series of planar polycyclic aromatic hydrocarbons

This work introduces a new local aromaticity measure, defined as the mean of Bader's electron delocalization index (DI) of para-related carbon atoms in six-membered rings. This new electronic criterion of aromaticity is based on the fact that aromaticity is related to the cyclic delocalized distribution of pi-electrons. We have found that this DI and the harmonic oscillator model of aromaticity (HOMA) index are strongly correlated for a series of six-membered rings in eleven planar polycyclic aromatic hydrocarbons. The correlation between the DI and the nucleus-independent chemical shift (NICS) values is less remarkable, although in general six-membered rings with larger DI values also have more negative NICS indices. We have shown that this index can also be applied, with some modifications, to study of the aromaticity in five-membered rings.     

The use of ab initio quantum molecular self-similarity measures to analyze electronic charge density distributions

Exact quantum molecular overlaplike and Coulomb-like self-similarity measures are studied in a selected series of molecules with the same number of electrons. It is found that quantum molecular overlap self-similarity measures can be used to estimate the concentration of electronic charge in molecules. A good linear relationship between the overlap self-similarity measure and the volume is found for molecules with the same number of electrons when the atoms of the systems being compared belong to the same row of the periodic table. Finally, an upper bound for the quantum molecular overlap self-similarity measure of molecules with a number of electrons up to 54 is given from the atomic quantum self-similarity measures obtained using Slater-type functions. © 1996 John Wiley & Sons, Inc.