Isolation,properties and association phenomena of alkaline salts and their crown complexes of a radical anion

The obtention of (tetradecachloro-4-oxidotriphenylmethyl)^–. M⁺ (M=Li, Na, K, n-Bu₄N) salts in ethereal solution and the isolation of some alkaline complexed salts (M=Li-12C4, Na-18C6, K-18C6, K(THF)₁–(H₂O)_3–4, n-Bu₄N) are described and discussed. The association phenomena of these salts has been studied by electronic spectroscopy, osmometry and electron spin resonance. Linear correlations between radii counterions and the position maxima of the electronic spectra bands permit the study of the species present in solution (free ions, ion pairs and quadrupolar aggregates).     

Cerium hybrid silica coatings on stainless steel AISI 304 substrate

AISI 304 Stainless Steel is widely used in different industrial fields because of its mechanical and corrosion properties. However, its tendency to corrosion in presence of halide ions limits the applications. One strategy to improve the corrosion resistance is the use of coatings barriers containing corrosion inhibitors in their formulation. The lanthanides present attractive green and corrosion properties for the substitution of chromates, which are the most common substances used as corrosion protection. However, these compounds are highly toxic, and an intense effort is being undertaken to replace them. Cerium is a good alternative because of its relatively low cost and abundance. It fulfils the basics requirements for being considered an alternative inhibitor: the ions form insoluble hydroxides and they present low toxicity. Inorganic and hybrid sol-gel coatings have been developed to increase the corrosion resistance of metals and they provide an excellent vehicle for the incorporation of secondary phases including particles and metal ions as cerium ions. The aim of this work was to study the influence of the incorporation of cerium ions in hybrid silica sol-gel coatings deposited on AISI 304 stainless steel as substrate as a potential replacement of chromate treatments. This system should combine the barrier protection effect of silica coating with the corrosion inhibitor effect of the cerium ions inside the coatings. After 7 days of immersion in NaCl, coated substrates showed lower current densities than the bare steel, although the coatings produced from Ce (III) salts experience a slight weakening in time and those obtained from Ce (IV) chemicals evidence an enhance in the coating performance, probably due to the plugging of corrosion products in the defective areas of the film.     

Stability of Suspensions of Bioactive Particles Using Hybrid Organic–Inorganic Solutions as Dispersing Media

Functional coatings incorporating different types of particles developed by the sol–gel method have been proposed in the last few years for diverse applications. This work focuses on the preparation of homogeneous coatings prepared from stable suspensions with 10 wt% of glass and glass ceramic particles in a hybrid organic–inorganic solution as dispersing media. For this purpose, the pH was shifted up to 6–7 by adding tetrapropylammonium hydroxide (TPAH) which behaves as a cationic surfactant being probably adsorbed on the particles surface, while the sol maintains stable. Rheological measurements were performed to study the stability of the suspensions prepared at different conditions such as the kind and concentration of dispersant and the pH conditions. After sintering at 450^∘C/30 min, coatings around 2 μ m in thickness were obtained.     

Natural radioactivity in soil samples of Kocaeli basin, Turkey

The city of Kocaeli is in the western part of Anatolia in Turkey and has a population of approximately 1.000.000. There is no information about radioactivity in the Kocaeli soils samples so far. For this reason, the concentrations of the natural radionuclides in soil samples from 27 different sampling stations in Kocaeli Basin and its surroundings have been determined. The results have been compared with other radioactivity measurements in different country"s soils. The typical concentrations of ¹³⁷Cs, ²³⁸U, ⁴⁰K, ²²⁶Ra, ²³²Th found in surface soil samples ranged from 2±0.6 to 25±6 Bq/kg, from 11±4 to 49±10 Bq/kg, from 161±30 to 964±127 Bq/kg, from 10±4 to 58±11 Bq/kg, and from 11±3 to 65±13 Bq/kg, respectively.     

Peak area determination and energy dependence of gamma- and X-ray peak tailing

Two analytical shape functions representing the shapes of - and characteristic X-ray photopeak sides obtained with a Ge(Li) detector are described. The photopeak centroid is accurately determined by using these functions. Energy dependence of photopeak tailing at the lower energy side of the photopeaks are obtained by the least-squares fitting method. The present method can be used for the analysis of partly overlapped photopeaks, one side of which is well resolved, with a sufficient accuracy.     

Measurement of L&agr; and Lß X-ray fluorescence cross sections in Er, Ta, W and Au by 16.896–59.543 keV photons

La and Lb X-ray fluorescence cross sections in Er, Ta, W and Au at excitation energies of 16.896, 22.581, 25.770, 32.890, 38.184, 43.949, 50.214 and 59.5 keV were investigated. Measurements were made using a low energy Si(Li) detector coupled to a model 4096 computerized multi-channel analyser. The experimental results were compared with the theoretically calculated values of L X-rays fluorescence cross sections and other experimental results. Good agreement was observed between experimental and theoretical values.     

Rheological and Electrokinetic Properties of Sodium Montmorillonite Suspensions

Because of their particular electric surface properties and crystal structure, most clay minerals possess a very high ion exchange capacity. Furthermore, the surface charge distribution is anisotropic: while faces of the laminar clay particles have a negative, pH-independent charge, edges may be positive or negative, depending on pH. In this work, we propose to contribute new data on particle-particle interaction and charge distribution, by means of measurements of the low-frequency dielectric dispersion (LFDD) of the clay suspensions. Because of the nonspherical shape of clay particles, there are no theoretical models capable of explaining the experimental relaxation spectra. Hence, we limit ourselves to obtaining indirect information by comparing LFDD spectra in different experimental conditions. The quantities of interest in LFDD are the value of the low-frequency dielectric constant, epsilon'(r)(0), and the characteristic or relaxation frequency, omega(cr). These two parameters were measured varying the weight fraction, straight phi, of clay (0.5, 1, and 1.5% w/v) and the pH of the dispersion medium (5, 7, and 9), while maintaining the ionic strength constant ([NaCl]=10(-4) M). It was found that the characteristic relaxation frequency of the dielectric constant was pH-dependent, with a significant minimum at pH 7 in all cases. The results are interpreted as the superposition of two independent relaxation phenomena, associated with edges and faces. With respect to the weight fraction influence, we have found a linear behavior of epsilon'(r)(0) with straight phi at pH 9, indicating the existence of no significant interaction between particles. However, at pH 7 a slight deviation of linearity is observed, and at pH 5 we observe a clearly nonlinear behavior, indicating a stronger degree of interaction between particles. This is in good agreement with the initial assumption that at acid pH values, the electric surface charge of faces is negative, whereas the edges possess a positive charge, thus favoring attractive face-to-edge interaction. Copyright 2000 Academic Press.     

聚苯醚砜在二甲基甲酰胺中稀溶液性质的研究(Ⅱ)

本文用广角及准弹性光散射法测定了聚苯醚砜各级分在DMF中和在θ溶剂中25℃时的均才半径R_G,第二维利系数A_2,流体力学半经R_H,扩散系数D_O,扩散系数的浓度依赖性k_F以及这些参数与分子量M的关系。它们的结果如下R_G=0.031MO~(0.55) D_O(θ)=0.906×10~(-4)M~(0.5) D_0=1.445×10~(-4)M~(0.55)A_2=0.033M~(-0.35) k_D(θ)=0.5M~(0.34) k_D=2.3×10~(-6)M~(1.36)α_H=R_H/R_H(θ)=0.63M~(0.05)R_H(θ)=0.0299M~(0.5)R_H=0.0188M~(0.55) 作者讨论了静态与动态两种高分子尺寸之间的关系;三种溶胀因子α_η和、α_H、α_G之间的关系;以及摩擦系数的浓度系数k_F与流体力学体积V_H之间的关系。它们的结果满足下面各关系式: R_H/R_G=[π(v+1)(2v+1)/3]~(1/2)(2-v)(1-v)/2, α_η~3=α_(G)~2α_H, k_F=1.2A_2M+N_AV_H/M,K_F(θ)=N_AV_H/M     

Selective Voltammetric Detection of Epinephrine in the Presence of Ascorbic Acid at Poly(4-Methoxyphenol)-Modified Electrode1

A gold electrode was modified with electropolymerized films of 4-methoxyphenol by its oxidative polymerization from an alkaline solution by cyclic voltammetry. The modified electrode was then used to determine epinephrine (EP) in the presence of a high concentration of ascorbic acid (AA) by differential pulse voltammetry. The peak positions as well as relative sensitivity EP/AA were affected by the potential window used for the polymerization. For polymerization between 0 and 1.3 V, the peak potentials recorded in a phosphate buffer solution (pH = 7.2) were 516 and 312 mV vs. Ag/AgCl for EP and AA, respectively. In addition the effects of pH and the type of electrolyte on the linearity range and detection limit are investigated. The detection limit for 3s-test is 0.1 M. The high selectivity and sensitivity for epinephrine was found to be due to charge discrimination/analyte accumulation.