Ascorbic acid as a potential masking agent in the tanning process. Olated chromium complexes involving ligating ascorbate and bridging sulfate groups

Two polynuclear complexes, a dimer and a tetramer, involving sulfate and hydroxo bridges and ligating ascorbate were isolated from aqueous solutions. Structural formulae are proposed on the basis of microanalytical and thermal analysis results, i.r., ¹³C-n.m.r., mass spectral data and magnetic measurements.     

Spectrophotometric determination of samarium(III) with chrome azurol S in the presence of cetylpyridinium chloride

A sensitive, simple method for the determination of trace amounts of samarium by spectrophotometry is described based on the formation of the samarium-chrome azurol S (CAS) complex in micellar medium. The molar absorptivities of the complexes at pH 7.5 at 505 nm were 3.6x10(4) and 1.4x10(5) l mol(-1) cm(-1) for water media and cetylpyridinium chloride (CPC), respectively. Beer's law is obeyed from 0.05-2 mg l(-1) of samarium at 505 nm as Sm-CAS-CPC complex. Optimal conditions such as reagent amounts, and pH for the samarium determination were reported. The effects of foreign ions were also investigated. The proposed method was successfully applied to the determination of samarium contents in synthetic samples.     

Lipase from a Brazilian StrainPenicillium citrinum Cultured in a Simple and Inexpensive Medium st]Heat-Denaturation, Kinetics, and pH Stability

This work is a study of lipase production by a Brazilian strain ofPenicillium citrinum using an inexpensive and simple medium without organic nitrogen sources and of some important industrial properties, including thermostability in relation to ionic strength. The maximal lipase activity (1585 U/L) was obtained whenPenicillium citrinum was cultured on 0.75% ammonium sulfate complemented with minerals salts instead of yeast extract. Although this activity was about 55% lower than that produced in medium with yeast extract (2850 U/L), the specific activity (7.8 U/mg proteins) was higher than that obtained with the yeast extract (4.9 U/mg proteins). The morphology of fungus changed totally, with yeast extract there are smooth, solid, and spherical pellets whereas on ammonium sulfate there are small “hairy” pellets uniformly suspended in the medium. The effect of ferrous (Fe⁺⁺) ions was carried out using medium MA with and without Fe⁺⁺ ions. Lipase production byPenicillium citrinum in medium MA requires Fe⁺⁺ ions, the absence of which caused a decreased of about 50% in the specific activity (3.5 U/mg proteins). The utilization of commercial, locally available oils as carbon sources, such as soybean oil (236 U/L) and corn oil (74 U/L) resulted in lower activity compared to olive oil, showing that lipase production byPenicillium citrinum is specifically induced by olive oil. Potassium concentration in the medium can effects the production of lipase (1 mM (1585 U/L), 10 mM (1290 U/L), and 30 mM (1238 U/L), 50 mM (195 U/L), and 100 mM (2 U/L). The crude culture filtered was susceptable to thermal deactivation. It was stable at pH 6.0, but was not stable at the optimum pH (8.0-8.5) at 50 mM. At the low ionic concentration (1-25 mM) this lipase was stable at low pH (3.5-4.0). The activation energy was 22.4 ±2.2 Kcal. mol 1.     

Surface Characterization of Sepiolite by Inverse Gas Chromatography

Inverse gas chromatography (IGC) was applied to characterize the surface of sepiolite. The adsorption thermodynamic parameters (the standard enthalpy (ΔH ⁰), entropy (ΔS ⁰) and free energy of adsorption (ΔG ⁰)), the dispersive component of the surface energy (γ _S ^d ), and the acid/base character of sepiolite surface were estimated by using the retention time of different non-polar and polar probes at infinite dilution region. The specific free energy of adsorption (ΔG ^sp ), the specific enthalpy of adsorption (ΔH ^sp ), and the specific entropy of adsorption (ΔS ^sp ) of polar probes on sepiolite were determined. ΔH ^sp were correlated with the donor and modified acceptor numbers of the probes to quantify the acidic K _A and the basic K _D parameters of the sepiolite surface. The values obtained for the parameters K _A and K _D indicated an acidic character for sepiolite surface.     

Synthesis, characterization, and electrochemical and electrochromic properties of sandwich dilutetium tetraphthalocyanine

A new sandwich-tpype dilutetium tetraphthalocyanine 4 has been synthesized by the reaction of dimeric lutetium(III) phthalocyanine 3 with two equiv. of dilithium octakishexylthiophthalocyanine in amyl alcohol. Compound 3 was prepared from 4',5',4",5"-tetraiminoisoindoline(1,4,7,10-tetrathia-12-crown-4) 1, 4,5-bis(hexylthio)-1,2-diiminoisoindoline and lutetium acetate in amyl alcohol. Compounds 3 and 4 were characterized by elemental analysis, UV/visible, IR, (1)H NMR and ESR spectroscopy. The electrochemical and electrochromic properties of 3 and 4 have been examined by cyclic voltammetry. Both 3 and 4 displayed well-defined electrochromic behavior.     

Surface modification of pyrophyllite with amino silane coupling agent for the removal of 4-nitrophenol from aqueous solutions

The surface of naturally hydrophobic mineral pyrophyllite was modified to hydrophilic by treatment with prehydrolyzed N-(2-aminoethyl)-3-aminopropyltrimethoxysilane (APEO) coupling agent to prepare a novel and effective adsorbent for the removal of 4-nitrophenol (4-NP) from aqueous solutions. XRD, FTIR, and SEM analyses were used to characterize the surface modification. It was found that after the grafting procedure, heat treatment at 110 degrees C results in condensation reaction between the OH groups of the APEO molecule and the hydroxyl groups and/or oxygen atoms on the pyrophyllite surface and the adsorption of 4-NP by APEO-modified pyrophyllite involves interactions between dissociated 4-NP molecules and protonated amine groups of APEO molecules attached to the mineral surface. Adsorption equilibrium data for 4-NP adsorption on APEO-treated and untreated pyrophyllite were most satisfactorily fitted using the Freundlich adsorption isotherm and adsorption capacity was found to be 0.268 mg/g for modified pyrophyllite whereas it was only 0.105 mg/g for untreated pyrophyllite.     

Film formation from pure and mixed latices; transient fluorescence study

A fast transient fluorescence technique was used to study latex film formation induced by organic solvent vapor. Mixtures of pyrene (P)- and naphthalene (N)-labeled and/or pure naphthalene-labeled latex films were prepared separately from poly(methyl methacrylate) (PMMA) particles. Then these pure and mixed latex films were exposed to vapor of various chloroform-heptane mixtures in seven different experiments. In both films, fluorescence lifetimes from N were monitored during vapor-induced film formation. It was observed that N lifetimes decreased as the vapor exposure time is increased. A Stern-Volmer kinetic analysis was used for low quenching efficiencies to interpret the decrease in N lifetimes. A Prager-Tirrell model was employed to obtain back-and-forth frequencies, nu, of reptating PMMA chains during latex film formation induced by solvent vapor. In both pure and mixed latex films, nu values were found to be correlated with the chloroform content in the vapor mixture. It was observed that polymer interdiffusion obeyed a t1/2 law during film formation.     

Synthesis and characterization of oligo-4-[(pyridin-3-ylimino)methyl]phenol

The oxidative polycondensation of 4-[(pyridin-3-ylimino)methyl]phenol (4-PIMP) with O₂, H₂O₂, and NaOCl was studied in an aqueous alkaline medium between 50°C and 90°C. Oligo-4-[(pyridin-3-ylimino)methyl]phenol (O-4-PIMP) prepared was characterized by ¹H-NMR, ¹³C-NMR, FT-IR, UV-VIS, size-exclusion chromatography, and elemental and thermal analyses techniques. At the optimum reaction conditions, the yield of O-4-PIMP was 18.9%, 39.4%, and 46.8% using H₂O₂, O₂, and NaOCl oxidant, respectively. According to the TG analysis, the initial degradation temperature of O-4-PIMP was 218°C, which was by 50°C higher than that of 4-PIMP. Thermal analyses of 4-PIMP and O-4-PIMP were carried out in N₂ atmosphere at 15–1000°C. The highest occupied molecular orbital, the lowest unoccupied molecular orbital, and electrochemical energy gaps of 4-PIMP and O-4-PIMP were determined from the onset potentials for n-doping and p-doping, respectively. Also, optical band gaps of 4-PIMP and O-4-PIMP were determined according to UV-VIS measurements.     

Removal of methyl violet from aqueous solution by perlite

The use of perlite for the removal of methyl violet from aqueous solutions at different concentration, pH, and temperature has been investigated. Adsorption equilibrium is reached within 1 h. The capacity of perlite samples for the adsorption of methyl violet was found to increase with increasing pH and temperature and decrease with expansion and increasing acid-activation. The adsorption isotherms are described by means of the Langmuir and Freundlich isotherms. The adsorption isotherm was measured experimentally at different conditions and the experimental data were correlated reasonably well by the adsorption isotherm of Langmuir. The order of heat of adsorption corresponds to a physical reaction. It is concluded that the methyl violet is physically adsorbed onto the perlite. The removal efficiency (P) and dimensionless separation factor (R) have shown that perlite can be used for removal of methyl violet from aqueous solutions, but unexpanded perlite is more effective.